Transcript the program - Times of Polymers (TOP)

8th INTERNATIONAL CONFERENCE
Times of Polymers (TOP) & Composites
June 19th – 23rd 2016, Ischia – ITALY
8th INTERNATIONAL
CONFERENCE
Times of Polymers (TOP) &
Composites
From Aerospace to Nanotechnology
June 19th – 23rd 2016, Ischia – ITALY
PROGRAM
CHAIRED BY
DOMENICO ACIERNO
CRdc Tecnologie scarl Naples
www.topconference.it
[email protected]
ALBERTO D’AMORE
Department of Industrial and Information Engineering,
Second University of Naples SUN
Monday, 20 June 2016 ‐ Room PRIMAVERA
09:40
10:00
Sang‐Woo Kim KIMS, Korea South
Alberto D'Amore Second University of Naples, Italy Lorenzo Sisca Politecnico di Torino, Italy Valentina Lopresto University of Naples Federico II, Italy Distributed Dynamic Load on Composite Laminates
COFFEE BREAK
10:20
10:40
INVITED LECTURE ‐ Gregory B. McKenna Texas Tech University, USA
Elastic and Viscoelastic Responses of Freely Standing Ultrathin Films: Reduced Glass Transition and Extreme Stiffening in the Melt State
Molecular‐dynamics simulations of crosslinking and confinement effects on structure,segmental mobility and mechanics of filled elastomers
11:10
INVITED LECTURE ‐ Alexander Lyulin Technische Universiteit Eindhoven, Netherlands
11:40
Emanuele Bezzeccheri
Università degli Studi di Salerno, Italy
Comparative Modeling of Vertical and Planar Organic Phototransistors with 2D Drift‐Diffusion Simulations
12:00
Alessandra Adrover Sapienza Università di Roma, Italy
Swelling and Drug Release from Oral Thin Films (OTFs)
12:20
Valentina Sabatini
Università degli Studi di Milano, Italy
12:40
Elena Fortunati University of Perugia, Italy
Functional End‐Capped Conducting Poly (3,4‐
Ethylenedioxythiophene)
Cellulose Nanocrystals in Nanocomposite Approach: Green and High‐Performance Materials for Ind., Biomed. & Agricul. Appl.
LUNCH
13:00
15:00
15:30
INVITED LECTURE ‐ Kia L. Ngai 16:00
16:20
Denise E.O. Santiago Polymer Research Laboratory, Phillipines
16:40
Martina Salzano De Luna
IPCB‐CNR, Italy
17:00
Walter W. Focke University of Pretoria, South Africa
17:40
17:50
18:20
18:40
19:00
19:20
Sub‐Rouse Modes in Polymer Thin Films: Coupling to Density and Responding to Physical Aging
CNR‐IPCF, Italy
Riccardo Casalini Naval Research Laboratory, USA Giuseppe Scherillo University of Naples Federico II, Italy 17:20
Chairman: D. Acierno
09:20
Multifunctional Airframes; the Role of Composites and Polymeric Materials
Development of High‐speed Reactive Processing System for Carbon Fiber‐reinforced Polyamide‐6 Composite : In‐
situ Anionic Ring‐opening Polymerization
Modelling the kinetics of strength degradation of polymer based composites during fatigue
Moisture effect on mechanical properties of polymeric composite materials
JCH Consultants Inc
Chairman: K. Ngai
09:00
PLENARY LECTURE ‐ John C. Halpin Dynamics in nanostructured films and nanocomposites
Controlling the Assembly of Graphene Based Nanosheets within a Rubber Matrix: Nano‐composite Morphology Probed by Measuring Gas Permeation and Dielectric Properties
Effect of Bentonite Modification on Hardness and Mechanical Properties of Natural Rubber Nanocomposites
Protection of Bronze Artefacts Through Polymeric Coatings Based on Nanocarriers Filled with Corrosion Inhibitors
Stiffening Mechanisms in Amorphous Polyamide Bio‐
Nanocomposites
Chairman: S.L. Simon
08:30
OPENING SESSION: D. ACIERNO and A: D'AMORE
COFFEE BREAK
Stefania Cantone CIRA, Italy
INVITED LECTURE ‐Alessandro Amendola ATR Avion de Transport Regional Toulouse, France Michele Iannone Finmeccanica, Italy
Francesco Marulo University of Naples Federico II, Italy
Loredana SANTO
Università di Roma Tor Vergata, Italy Aniello Cammarano IMAST Scarl, Italy
Introduction to the Aerospace Session
A case study on the application of new technologies for the next generation commercial turboprop
Multifunctional composites aircraft applications in Finmeccanica ‐ some examples
Probabilistic Analysis and Experimental Results of Sound Trasmission Loss of Composite Panels
Shape Memory Polymeric Composites Sensing by Optic Fibre Bragg Gratings: a Very First Approach
Polymer‐based composites for aerospace: an overview of IMAST results Eva
Chairman: J. Halpin
08:20
Monday, 20 June 2016 ‐ Room PITECUSA
08:20
The conference session is running in the room Primavera
09:00
09:20
09:40
10:00
Ferdinando F. Bruno
US Army Natick Labs RDECOM, USA
Biochemical synthesis of water soluble conducting polymers
Maria L. Di Lorenzo National Research Council, Italy
Marco Mauri Università degli Studi di Genova, Italy Melting of a'‐ and a‐Crystals of Poly(lactic acid)
Gelling Process of Sodium Alginate with Bivalent Ions Rich Microsphere: Nature of Bivalent Ions
A New Approach to the Synthesis of Monomers and Polymers Incorporating Furan/Maleimide Diels‐Alder Adducts
Maria Barbara Banella Università di Bologna, Italy Chairman: M. Guenza
08:30
COFFEE BREAK
10:20
10:40
The conference session is running in the room Primavera
11:40
Oleg V. Lebedev
Moscow Institute of Physics and Technology, Russia
12:00
Monica Periolatto Freie Universität Bozen, Italy
12:20
V. Bershtein Ioffe Institute, Russia
12:40
Andreas Klingler Institute for Composite Materials, Germany
Study of the Oriented Composites with the Conductive Segregated Structure Obtained via Solid‐Phase Processing of the UHMWPE Reactor Powder Mixed with Carbon Nanofillers
Photocured Epoxy/Graphene Nanocomposites with Enhanced Water Vapor Barrier Properties
Incorporating Silica into Cyanate Ester‐based Network by Sol‐Gel Method: Structure and Properties of Subnano‐ and Nanocomposites
Fatigue Crack Propagation in Self‐Assembling Nanocomposites
Chairman: B. Schartel
11:10
LUNCH
13:00
15:00
The conference session is running in the room Primavera
16:00
Sara Frattari University of Rome "La Sapienza", Italy
16:20
Alberta Latteri University of Catania, Italy Preparation and Thermal Behaviour of a series of Liquid Wood‐Polypropylene Composites
16:40
Natalia Korneeva Russian Accademy of Sciences, Russia
Properties of Fiber Reinforced Plastics about Static and Dynamic Loadings
17:00
Christian Spandern The Slovak University of Technology, Slovakia
17:20
PLA recycling by hydrolysis at high temperature
The effect of synthetic nanosilica on tribological properties of graphite/epoxy composites
COFFEE BREAK
17:40
17:50
18:20
The conference session is running in the room Primavera
18:40
19:00
19:20
Chairman: V. Lo Presto
15:30
09:00
INVITED LECTURE ‐ Sahar Al‐Malaika
Grafting of Functional Antioxidants on Highly Crosslinked Polyethylene
Prediction of mechanical property loss in polyamide during immersion in sea water
On The Degelation Of Networks – Case Of The Radiochemical Degradation Of Methyl Methacrylate – Ethylene Glycol DiMethacrylate Copolymers
Aston University, United Kingdom
Pierre Y. Le Gac Ifremer, France
09:20
Emmanuel Richaud
Arts et Métiers ParisTech, France
09:40
Aïcha Mikdam Mines ParisTech, ENSAM ParisTech/ EDF, France
10:00
Urs Meier EMPA, Switzerland
Kinetic Modeling of the Oxidative Degradation of Additive Free PE in Bleach Disinfected Water
The Life Times of Polymer Composites in Construction
COFFEE BREAK
10:20
INVITED LECTURE ‐ Sindee L. Simon
Ferruccio Doghieri
University of Bologna, Italy
Rega Romina
CNR, Italy
Intrinsic Size Effects, Surface Effects, and Tg at the Nanoscale
Insitu Analysis of the Glass Transition Temperature in Confined Polymers: Irreverisble Adsorbed Nanolayers and Block Copolymers
Probing effect of solvent concentration on glass transition and sub‐Tg structural relaxation in polymer solvent Pyro‐electrification of polymer membranes for cell patterning
12:20
Marco Coletti TA Instruments, Italy
Investigation On β‐Relaxation Change In Graphene‐PEMA Nanocomposites
12:40
Esteve Ernault Arts et metriers ParisTech, France
Influence of thermo‐oxidation on dielectric and mechanical properties of epoxy/amine resins
13:00
Emilie Courvoisier Arts et metriers ParisTech, France
Water Absorption in PEEK and PEI Matrices. Contribution to the Understanding of Water‐Polar Group Interactions
10:40
11:10
11:40
12:00
Texas Tech University, USA
INVITED LECTURE ‐ Rodney D. Priestley Princeton University, USA
13:20
LUNCH
15:00 19:00
Tour of Ischia on Boat
Chairman: R. Casalini
08:30
Chairman: M. Mitov
Tuesday, 21 June 2016 ‐ Room PRIMAVERA
Tuesday, 21 June 2016 ‐ Room PITECUSA
The conference session is running in the room Primavera
09:00
Sara Ronca Loughborough University, United Kingdom
09:20
Elisabete Frollini
University of Sao Paulo, Brazil
09:40
10:00
High Toughness Carbon Cloth Composites for Low Temperature Applications
Polymeric Materials from Renewable Resources
In‐phase and Out‐of‐phase Tensile Properties of Jesús M. García‐Martínez Polypropylene/Mica Composites Modified by a Novel Consejo Superior de Investigaciones Científicas, Spain Industrial Waste Based Interfacial Agent. Responses at theI and I Transitions of the Polymer Phase.
Alessia Quintadamo
Dual morphology (fibers and particles) cellulosic filler for University La Sapienza, Italy
WPC materials
Chairman: Lecce
08:30
COFFEE BREAK
10:20
10:40
The conference session is running in the room Primavera
Rieke Koll
Synthesis and Structural Properties of Superparamagnetic University of Hamburge, Germany
Polymer Nanocomposites
Mikhail N. Efimov
Metal‐Carbon Nanocomposites Based On Activated IR 12:00
A.V. Topchiev Institute of Petrochemical Synthesis RAS, Pyrolized Polyacrylonitrile
11:40
12:20
Giulia M. Ognibene
Università Degli Studi di Catania, Italy 12:40
Anastassia N. Rissanou University of Crete, Greece
13:00
Antonella Patti
University of Naples Federico II, Italy
Functional Electrospun Membranes
Atomistic Simulation of Graphene‐Based Polymer Nanocomposites
Dispersion issues and thermal conductivity of polypropylene/multi wall carbon nanotube systems
13:20
LUNCH
15:00 19:00
Tour of Ischia on Boat
Chairman: A. Lesser
11:10
08:30
INVITED LECTURE ‐ Bernhard Schartel
Bundesanstalt für Materialfoschung und ‐prüfung, Germany
09:00
Fabiana Tescione
National Research Council, Italy
09:20
Dintcheva Nadka Tzankova
University of Palermo, Italy
Improved Carbon Nanotubes Dispersion Trough Polar Dispersant Agents In Polyamide
Valentina Marturano National Research Council, Italy
Laura Mecozzi
National Research Council, Italy
Light‐Responsive Polymer Microcapsules as Delivery Systems for Natural Active Agents
COFFEE BREAK
10:20
10:40
11:10
Spiral formation at microscale by µ‐pyro‐electrospinning
INVITED LECTURE ‐Michel Mitov
Polymer‐cholesteric liquid crystal (CLC) composites with a broad light reflection band
Non‐equilibrium phenomena in confined soft matter: how irreversible adsorption affects the segmental dynamics of thin polymer films
CNRS, France
INVITED LECTURE ‐Simone Napolitano Université Libre de Bruxelles, Belgium 11:40
Fernando Vargas‐Lara Hydrodynamic Radius Fluctuations in Model DNA–Grafted National Institute of Standards and Technology, USA Nanoparticles
12:00
Jack F. Douglas
National Institute of Standards and Technology, USA
Conformational Nature of DNA–Grafted Chains on Spherical Gold Nanoparticles
12:20
Beatriz A. Pazmino Betancourt
National Institute of Standards and Technology, USA
Evolution of Dendrimer Conformational Structure with Generation Number
12:40
Peter Po‐Jen Chu
National Central University, Taiwan
Decoupling Ion Conductivity and Fluid Permeation through Optimizing Hydrophilic Channel Morphology
LUNCH
13:00
15:00
15:30
16:00
16:20
16:40
17:00
Chairman: G.B. McKenna
10:00
Morphological characterization of silica obtained by calcination of methacrylic and epoxy – silica hybrid systems
INVITED LECTURE ‐Klaus Friedrich Technical University Kaiserslautern, Germany
Valentina Mazzanti Università degli Studi di Ferrara, Italy
Gianluca Cicala
University of Catania, Italy
Y.S. Petronyuk N.M. Emanuel Institute of Biochemical Physics RAS, Russia
Paulo Teodoro D.L. Carada Mechanisms of CFR Composites Destruction Studying with Pulse Acoustic Microscopy
Mostafa Jabbari University of Borås, Sweden
Carbon Fiber Reinforced Thermoplastic and Thermosetting Composites for Future Automotive Applications
In ‐ line vs. off – line rheological characterization of Wood Polymer Composites
Recyclable Epoxy Resins: an example of green approach for advanced composite applications
Mechanisms of CFR Composites Destruction Studying with Pulse Acoustic Microscopy
Effects of Heat Treatment on the Mechanical Properties of Kenaf Fiber
All‐nylon composite (ANC) coated‐textile
A breakthrough solution for adhesion and recyclability of coated‐textiles
17:20 19:00
Poster Session
20:30
Gala Dinner
Chairman: M. Iannone
09:40
Multilayer Graphene Rubber Nanocomposites
Chairman: P. Russo
Wednesday, 22 June 2016 ‐ Room PRIMAVERA
Wednesday, 22 June 2016 ‐ Room PITECUSA
The conference session is running in the room Primavera
09:00
Simone Boccardi
University of Naples Federico II, Italy
09:20
Marialaura Clausi Sapienza University of Rome, Italy
09:40
10:00
Monitoring Thermoplastic Composites Under Cyclic Bending Tests
Steady‐Shear Rheological Properties of Graphene‐ Reinforced Epoxy Resin for Manufacturing of Aerospace Composite Films
Poly‐m‐Aramid Nanofiber Mats: Production for Application as Structural Modifiers in CFRP Laminates
Microwave behaviour comparison between different carbon based materials in Epoxy resin composites
Laura Mazzocchetti University of Bologna, Italy
Mauro Giorcelli Politecnico di Torino, Italy
Chairman: K. Friedrich
08:30
COFFEE BREAK
10:20
10:40
The conference session is running in the room Primavera
11:40
12:00
12:20
12:40
Vladim Levin Russian Academy of Sciences, Russia
Rosaria Altobelli University of Naples Federico II, Italy
K. Chrissopoulou
Foundation for Research and Technology‐Hellas, Greece
Viera Khunova Slovak University of Technology, Slovakia
Bulk Microstructure and Local Elastic Properties of Carbon Nanocomposites Studied by Impulse Acoustic Microscopy Technique
Morphology Stabilization of Co‐Continuous Polymer Blends Through Clay Nanoparticles
Effect of Confinement and Molecular Architecture on Interfacial Dynamics
Biodegradable Poly (ɛ‐caprolactone)/Gelatin Nanofibers: Effect of Tubular Halloysite on Structure and Properties
Chairman: L. Torre
11:10
LUNCH
13:00
15:00
The conference session is running in the room Primavera
16:00
T. Choupin
Airbus Group Innovation, France
16:20
Bernhard Moeginger
University of Applied Sciences, Germany
16:40
17:00
Isothermal Crystallization Kinetic Modeling of Poly(etherketoneketone) (PEKK)
Curing Behavior and Reaction Kinetics of Binder Resins for 3D‐Printing Investigated by Dielectric Analysis (DEA)
Effect of Cooling Rate on the Crystal Polymorphism in Rene Androsch
Beta‐nucleated Isotactic Polypropylene as Revealed by a Martin Luther University Halle‐Wittenberg, Germany
Combined WAXS/FSC Analysis
Romain Brethous
ENSAM ParisTech, France
Non‐Fickian Behavior of Water Absorption in an Epoxy‐
Amidoamine Network
17:20 19:00
Poster Session
20:30
Gala Dinner
Chairman: A. Lesser
15:30
University of Oregon, USA
09:30
A.N.Semenov
University of Strasbourg, France
09:50
Brian L. Weick University of the Pacific, USA
Dynamic‐Compliance and Viscosity of PET and PEN
Noëlle Billon Mines ParisTech, France
Antonino Valenza Università di Palermo, Italy
Time dependent mechanical modeling for polymers based on network theory
Evaluation of the temperature e ect on the fractional linear viscoelastic model for an epoxy resin
10:10
10:30
COFFEE BREAK
10:50
11:10
11:40
12:10
12:30
12:50
13:10
13:30
Alan J. Lesser
University of Massachusetts Amherst, USA
Luigi Torre
University of Perugia, Italy
Self‐reinforced composites for enhanced processability and performance
High Temperature fibre reinforced composites and nanocomposites
Fritz Soergel
Thermo Fisher Scientific, Germany
Rheo‐Raman Microscope: Tracking Molecular Structures as a Function of Deformation and Temperature
Eugenio Amendola
National Research Council, Italy
Claudio Leone
Second University of Naples, Italy
Daniela Mileva
Borealis AG, Austria
Insight on Mendable Resin Made by Combining Diels‐
Alder Epoxy Adducts with DGEBA
Laser Treatment of Carbon Fibre Reinforced Thermoplastic Matrix for adhesive bonding
Structure and Properties of Polypropylene Cast Films: Polymer Type and Processing Effects
CLOSING REMARKS
Chairman: A. D'Amore
09:00
Inter‐ and intramolecular contributions to the dynamics of polymer melts in the unentangled and entangled regime
Hierarchical Structure Formation in Unentangled Polymer Solutions under Extension
INVITED LECTURE ‐Marina Guenza Chairman: L. Grassia
Thursday, 23 June 2016 ‐ Room PRIMAVERA
Thursday, 23 June 2016 ‐ Room PITECUSA
09:30
Pietro Russo
National Research Council, Italy
Low‐Velocity Impact Behavior of Woven Jute/Poly(Lactic Acid) Composites
09:50
Gulshan Kumar
Guru Gobind Singh Indraprasth University, India
Morphological and biodegradability studies of euphorbia latex modified polyester ‐ banana fiber composites
Angela Marotta
University of Naples Federico II
Enrica Fontana
National Research Council, Italy
Shape‐memory effect of nanocomposites based on liquid‐
crystalline elaastomers
Polyvinylidenefluoride/carbon nanotubes mixed matrix membranes with tailored properties
10:10
10:30
Chairman: G. Filippone
The conference session is running in the room Primavera
09:00
COFFEE BREAK
10:50
11:10
The conference session is running in the room Primavera
12:10
12:30
12:50
13:10
Lasse Habercorn
University of Hamburg, Germany
Maria Obloj‐Muzaj
Industrial Chemistry Research Institute, Poland
Rachele Castaldo
National Research Council, Italy
Emanuela Tamburri
Università degli Studi di Roma, Italy
Lasse Habercorn ‐ University of Hamburg, Germany
Seeded Emulsion Polymerization as a Powerful Tool for the Biofunctionalization of Quantum Dots
Properties of Blends for Profiles and Semi‐Rigid Films Made of PVC Nanocomposites Produced in Pilot Scale
Hyper‐crosslinked resins filled with multiwalled carbon nanotubes
A New Fabrication Route for PVA/Graphene Platelets Composites With Enhanced Functionalities
CLOSING REMARKS
13:30
Biomaterials
Composites
Durability
Glass Transition
Nano‐Composites
Processing
Soft Materials
Thin Films
Viscoelasticity
Aerospace
Chairman: G.Mensitieri
11:40
POSTER SESSION
Poster Place
1
2
3
Corresponding Author
Poster Place
2‐Hydroxyethyl Metahcrylate/Gelatin based Superporous Hydrogels for Tissue Regeneration
Prof. Simonida Tomic 26
Effect of Natural Fibers and Bio‐Resins on Mechanical Properties in Hybrid and Non‐Hybrid Composites
Ultrasound – A New Approach For Non‐Woven Scaffolds Investigation
Physical ‐ Mechanical Characterization Of Poly(lactide)/Poly (ε‐ caprolactone) blends with Ethyl Ester L‐Lysine Triisocyanate As Reactive Agent.
Dr. Petronyuk Yulia
27
Polymer composites based on gypsum matrix
Prof. Visco Annamaria
28
Rheological and Thermal Performance of Newly Developed Binder Systems for Ceramic Injection Molding
Prof. Catauro Michelina
29
A Preliminary Study on the Dynamic‐Mechanical Behaviour of Dr. García‐
Compression Moulded Polypropylene/Carbon Fiber Martínez Jesús Composites Interfacially Modified by a Succinic Anhydride María
Grafted Atactic Polypropylene from Polymer Wastes.
30
Chemical Interaction of Polyethylene Matrix with Vegetable Fillers in Biocomposites
PhD. Student Zykova Anna
31
Mechanical Properties of Ethylene‐Octene Copolymer (EOC) ‐ Lignocellulosic Fillers Biocomposites in Dependence to Filler Content
PhD. Student Zykova Anna
32
Visualization of Impact Damaging of Carbon/Epoxy Panels
Title
4
Sol‐gel synthesis and characterization of SiO2/PEG hybrid materials containing Quercetin as implants with antioxidant properties
5
Structural Changes in the Low‐Density Polyethylene/Natural Rubber Composites in the Aqueous and Soil Media
6
Process Optimization Electrospinning Fibrous Material Based оn Polyhydroxybutyrate
7
Improvement of the Titanium Implant Biological Properties by Coating with Poly (ε‐Caprolactone)‐based Hybrid Nanocomposites Synthesized Via Sol‐Gel
8
Biodegradable containers from green waste materials
9
10
11
12
13
14
PhD. Student Mastalygina Elena
PhD. Student Mastalygina Elena
Prof. Catauro Michelina
Prof. Sartore Luciana Sartore
Prof. Filippone Giovanni
Chitosan‐based Hydrogel for Dye Removal from Aqueous Solutions: Optimization of the Preparation Procedure
Preparation and Characterization of Biodegradable Dr. Olivieri Rita
PLA/Organosilylated Clay Nanocomposites
Sol‐Gel Silica‐Based Nanocomposites Containing a High PEG Prof. Catauro Amount: Chemical Characterization and Study of Biological Michelina
Properties
Alginate‐Polymethacrylate Hybrid Hydrogels with Double Ionic Dr. Stagnaro Paola
and Covalent Network for Tissue Engineering
PhD. Student Preparation and mechanical characterization of Lopresti polycaprolactone/graphene oxide biocomposite nanofibers
Francesco
Controlled Release Of Cortisone Drugs From Block Copolymers Dr. La Carta Stefania
Synthetized By ATRP
33
34
35
Title
Rheological Properties of Polyolefin Composites Highly Filled with Calcium Carbonate
Biodegradable Polyester‐Based Eco‐Composites containing Hemp Fibers Modified with Macrocyclic Oligomers
Organic‐Inorganic Hybrid Foams with Diatomite addition: Effect on functional properties
Corresponding Author
Dr. Fragassa Cristiano
Prof. Maria Mucha
Prof. Hausnerova Berenika
PhD. Student Boccardi Simone
Prof. Nobile Maria Rossella
Dr. Stagnaro Paola
Prof. Liguori Barbara
Dr. Raimo Maria
36
Crystallization Analysis for Fiber/Polymer Composites
37
Multifunctional Epoxy Composites with Natural Moroccan Clays
PhD. Student Monsif Manal
38
Bio‐based Polyurethane foams from renewable resources
Dr. Verdolotti Letizia
39
Design and realization a Skiff racing boat hull made of natural fibers reinforced composite
Dr. Collotta Massimo
Dr. Obloj‐
Muzaj Maria
15
Superabsorbent Biphasic System Based on Poly(Lactic Acid) and Poly(Acrylic Acid)
Prof. Sartore Luciana Sartore
40
Properties of Rigid Films Made of PVC Nanocomposites
16
Composite Material Based on Fluoroplast and Low Melting Oxyfluoride Glass
Prof. Ignatieva Lidia
41
Influence of Lignin on Morphology, Structure and Thermal Behavior of Polylactic Acid‐based Biocomposites
17
Non‐Isothermal Crystallization Kinetics in Melt‐Drawn PCL/PLA Dr. Kratochvíl Microfibrillar Composites
Jaroslav
42
Dr. Predicting the Residual Strength of Open‐Hole (OH) Composite Dell'Aversano Specimens Subjected to Cyclic Loading
Raffaella
18
Numerical Simulating and Experimental Study on the Woven Carbon Fiber‐Reinforced Composite Laminates under Low‐
Velocity Impact
Dr. Liu Hanyang
43
Partial transparency of compressed wood
19
Properties of Recycled Polypropylene Based Composites Incorporating Treated Hardwood Sawdust
Dr. Shulga Galia
44
Glass Transition And Composite Formation In InF3‐Containing Oxyfluoroniobate System
20
Nanoparticle Fillers Obtained from Wood Processing Wastes for Reinforcing of Paper
Dr. Laka Marianna
45
Polymers Containing Isolated Phenylvinyl Substituted Carbazole Rings as Electroactive Materials for OLEDs
21
Failure Behavior for Composite Single‐Bolted Joints in Double Shear Tension
Dr. Tang Zhanwen
46
Electro‐Active Polymers Containing Pendent 2,7‐
Diarylfluorene Fragments as Materials for OLEDs
22
Study on Process and Characterization of High‐Temperature Resistance Polyimide Composite
Dr. Pan Ling‐Ying
47
Electrical Characterization of TiO2 Nanotubes Synthesized Through Electrochemical Anodizing Method
23
PEDOT:PSS/GO Nanocomposites: Determination of the Aspect PhD. Student Ratio by Indirect Measurements
Giuri Antonella
48
Preliminary Ultrasound Studies on Magnetic Fluids Based on Iron Oxide Nanoparticles
24
Non‐Steroidal Anti‐Inflamatory Drugs as Guest of Dendronized Polymeric Nanocomposites
Prof. Radić Deodato
49
Characterization of thermal destruction behavior of hybrid composites based on polyoxymethylene, ethylene‐octene copolymer impact modifier and ZnO nanofiller
Prof. Merijs Meri Remo
25
Resin flow and void formation in an autoclave cure cycle
Dr. Lionetto Francesca
50
Organo‐Modified Bentonites as New Flame Retardant Fillers in Epoxy Resin Nanocomposites
Dr. Benelli Tiziana
Dr. Canetti Maurizio
Prof. Sugimoto Hiroyuki
Mrs. Savchenko Natalia
PhD. Student Tavgeniene Daiva
PhD. Student Krucaite Gintare
PhD. Student Manescu Paltanea Veronica
PhD. Student Cristina Liana Popa
POSTER SESSION
Poster Place
Title
Corresponding Author
Poster Place
Title
Corresponding Author
The influence of different dispersion methods on the size of the aggregate of CNTs in epoxy resin for the manufacturing of carbon fiber reinforced composites
Experimental Investigation on CFRP Milling by Low Power Q‐
Switched Yb:YAG Laser Source
Prof. Leone Claudio
68
Manufacturing Process of a Multifunctional Composite Panel with Nanocharged Matrix
Dr. Volponi Ruggero
Prof. Lamberti Patrizia
69
Artificial Intelligence Methods Applied in the Controlled Synthesis of Polydimethilsiloxane ‐ Poly (methacrylic acid) Copolymer Networks with Imposed Properties
Dr. Teodora Rusu
One‐pot Preparation of Superparamagnetic Attapulgite/Fe3O4/polydopamine Nanocomposites for Adsorption of Methylene Blue
Dr. Mu Bin
70
Issues Related to SPR Joints Subjected to Fatigue Loads
Prof. Lamanna Giuseppe
56
Characterisations of collagen‐silver‐hydroxyapatite nanocomposites
Dr. Daniela Predoi
71
Numerical and experimental behaviour of adhesive joints subjected to peeling load
Prof. Lamanna Giuseppe
57
Tellurium‐Based Nanocomposites For Plastic Electronic Applications
Dr. Palomba Mariano
72
High‐sensitive Detection of Gliadin by Pyro‐
electrohydrodynamic accumulation
73
Graphene Oxide Reduction by Microwave Heating
51
Rheological and Morphological Properties of Graphene‐Epoxy Prof. Nobile Nanocomposites
Maria Rossella
66
52
Investigation on Strain Sensing Properties of Carbon‐based Nanocomposites for Structural Aircraft Applications
PhD. Student Vertuccio Luigi
67
53
Morphological and Electrical Properties of Epoxy‐based Composites Reinforced with Exfoliated Graphite
Dr. Spinelli Giovanni
54
Electrical Properties of Multiphase Composites based on Carbon Nanotubes and an Optimized Clay Content
55
58
59
60
61
62
63
64
65
Influence of the Nanotube Oxidation on the Rheological and Electrical Properties of CNT/HDPE Composites
Precipitation Of Lamellar Gold Nanocrystals In Molten Polymers
Thermal Investigation of Tetrafunctional Epoxy Resin Filled with Different Carbonaceous Nanostructures
Reclamation of post‐consumer plastics for development of polycarbonate and acrylonitrile butadiene styrene based nanocomposites with nanoclay
Copolyamide/Sepiolite Nanocomposites with Enhanced Stiffness and Toughness
Production and Characterization of Polyethylene/Organoclay Oriented Fiber
Prof. Nobile Maria Rossella
Dr. Carotenuto Gianfranco
Prof. Romano Vittorio
Dr. Zicans Janis
Dr. Garofalo Emilia
PhD. Student Coppola Bartolomeo
Biopolymer Based Nanocomposites Reinforced with Graphene Dr. Botta Luigi
Nanoplatelets
PhD. Student Influence of Intumescent Flame Retardant and Sepiolite on Pappalardo the Mechanical and Rheological Behavior of Polypropylene
Salvatore
74
75
Temperature‐dependent dielectric properties of a thermoplastic gelatin
Macroporous hydrogels with tailored morphology and mechanical properties
Dr. Barra Giuseppina
Dr. Gennari Oriella
Dr. Longo Angela
Dr. Landi Giovanni
Prof. Bignotti Fabio
76
Combination of Light‐Induced Effect and Gate Bias Stress in Organic Phototransistors
Dr. Liguori Rosalba
77
Study of Oxygen Scavenging PET‐based films activated by water
Dr. Rossi Gabriella
78
Neutral Wetting Brush Layers for Block Copolymer Thin Films Using Homopolymer Blends
Dr. Antonioli Diego
79
Surface Engineering with Functional Random Copolymers for Nanolitographic Applications
Dr. Antonioli Diego
80
Laser‐flash in‐plane thermal analysis: the case of oriented UHMWPE
PhD. Student Forte Giuseppe
Prof. Bershtein Vladimir
56
Characterisations of collagen‐silver‐hydroxyapatite nanocomposites
Dr. Daniela Predoi
81
Methacrylated Monosaccharides as the Modifiers for Carbochain Polymers: Synthesis, Mechanical/Thermal Properties and Biodegradability of Hybrids
57
Tellurium‐Based Nanocomposites For Plastic Electronic Applications
Dr. Palomba Mariano
82
Antiplasticization‐driven stiffening in epoxy‐amine networks: effects of the resin formulation
Dr. Pandini Stefano
58
Influence of the Nanotube Oxidation on the Rheological and Electrical Properties of CNT/HDPE Composites
Prof. NOBILE Maria Rossella
83
Modelling the Viscoelasticity of Ceramic Tiles by Finite Element
Dr. Pavlovic Ana
59
Precipitation Of Lamellar Gold Nanocrystals In Molten Polymers
Dr. Carotenuto Gianfranco
84
Shape memory behavior of epoxy‐based model materials: tailoring approaches and thermo‐mechanical modeling
Dr. Pandini Stefano
60
Thermal Investigation of Tetrafunctional Epoxy Resin Filled with Different Carbonaceous Nanostructures
Prof. Romano Vittorio
85
The effects of boric acid on the time‐dependent phase change Prof. Kim of aliphatic polyketone in the aqueous solutions of metal salts Byoung Chul
composites
61
Reclamation of post‐consumer plastics for development of polycarbonate and acrylonitrile butadiene styrene based nanocomposites with nanoclay
Dr. Zicans Janis
86
Recent advances of nanotecnology in medicine and engineering
62
Copolyamide/Sepiolite Nanocomposites with Enhanced Stiffness and Toughness
Dr. Garofalo Emilia
87
Predicting the glass transition temperature as function of crosslink density and polymer interactions in rubber compounds
PhD. Student D'Escamard Gabriella
63
Production and Characterization of Polyethylene/Organoclay Oriented Fiber
PhD. Student Coppola Bartolomeo
88
Rheology and Mechanics of Polyether(ether)ketone – Polyetherimide Blends for Composites in Aeronautics
PhD. Student Rosa Mattia
64
Biopolymer Based Nanocomposites Reinforced with Graphene Dr. Botta Luigi
Nanoplatelets
89
Dielectric Properties of Composites Using Time Domain Relectometry (TDR)
65
Influence of Intumescent Flame Retardant and Sepiolite on the Mechanical and Rheological Behavior of Polypropylene
PhD. Student Pappalardo Salvatore
90
PVP‐Stabilized Arsenic Sulfide As4S4 Nanocomposites Probed with Positron Annihilation Lifetime Spectroscopy
Prof. Lucio Nobile
Prof. Soualmia A.
Prof. Oleh Shpotyuk
Monday, 20 June 2016
08:30
09:00
09:20
09:40
10:00
10:20
10:40
11:10
11:40
12:00
12:20
12:40
13:00
15:00
15:30
16:00
16:20
16:40
17:00
17:20
17:40
17:50
18:20
18:40
19:00
19:20
Halpin J.C.
Kim S.W. Bruno F.F. D'Amore A.
Di Lorenzo M.L. Sisca L.
Mauri M.
Lopresto V.
Banella M.B. COFFEE BREAK
McKenna G.B.
Lyulin A.
Bezzeccheri E. Lebedev O.V.
Adrover A.
Periolatto M.
Sabatini V.
Bershtein V.
Fortunati E.
Klingler A.
LUNCH BREAK
Ngai K.L.
Casalini R.
Scherrillo G.
Frattari S.
Santiago D.E.O. Latteri A.
Salzano De Luna M. Korneeva N.
Focke W.W.
Spandern C.
COFFEE BREAK
Cantone S.
Amendola A.
Iannone M.
Marulo F.
Concilio A.
Cammarano A.
Wednesday, 22 June 2016
Tuesday, 21 June 2016
08:30
09:00
09:20
09:40
10:00
10:20
10:40
11:10
11:40
12:00
12:20
12:40
13:00
13:20
15:00
19:00
Al‐Malaika S. Le Gac P.Y.
Ronca S. Richaud E.
Frollini E.
García‐Martínez J.M. Mikdam A.
Meier U.
Quintadamo A.
COFFEE BREAK
Simon S.L.
Priestley R.D.
Doghieri F.
Koll R.
Romina R.
Efimov M.N.
Ognibene G.M.
Coletti M.
Ernault E.
Rissanou A.N. Courvoisier E. Patti A.
LUNCH BREAK
08:30
09:00
09:20
09:40
10:00
10:20
10:40
11:10
11:40
12:00
12:20
12:40
13:00
15:00
15:30
16:00
16:20
16:40
17:00
Schartel B.
Tescione F.
Boccardi S.
Tzankova D.N. Clausi M.
Marturano V. Mazzocchetti L.
Mecozzi L.
Giorcelli M.
COFFEE BREAK
Mitov M.
Napolitano S.
Vargas‐Lara F. Levin V.
Douglas J.F.
Altobelli R.
Pazmino B.B.A. Chrissopoulou K.
Chu P.P.J.
Khunova V.
LUNCH BREAK
Friedrich K.
Mazzanti V.
Cicala G.
Choupin T. Petronyuk Y.S. Moeginger B.
Carada P.T.D.L. Androsch R. Jabbari M.
Brethous R. 17:20
19:00
POSTER SESSION
20:30
GALADINNER
Tour of Ischia on Boat
Thursday, 23 June 2016
09:00
09:30
09:50
10:10
10:30
10:50
11:10
11:40
12:10
12:30
12:50
13:10
13:30
Guenza M. Semenov A.N. Russo P.
Weick B.L.
Kumar G.
Billon N.
Marotta A.
Valenza A.
Fontananova E.
COFFEE BREAK
Lesser A.J.
Torre L.
Soergel F.
Habercorn L.
Amendola E. Obloj‐Muzaj M.
Leone C. Castaldo R.
Mileva D.
Tamburri E.
CLOSING REMARKS
Biomaterials
Composites
Durability
Glass Transition
Nano‐Composites
Processing
Soft Materials
Thin Films
Viscoelasticity
Aerospace