Transcript Document 7868848

LadderPort ™
LadderPort™, the inexpensive
permanent building mounted
extension ladder receiver, securely
holds the ladder in place.
•Hooks secure the ladder while
side plates prevent it from moving
left or right.
•The solid metal grab bars enable
the technician to climb up and
down a portable extension ladder
comfortably and safely.
•LadderPort™ meets OSHA
Regulation 1926.1053(b)(1)
LadderPort ™
Ladder Receiver
Type 1
Type 2
Type 4
Type 3
•LadderPort™, is available in
different models to fit most
building facades
•Most locations will require Type 1
or Type 2
LadderPort ™
Ladder Receiver
LadderPort™ Type 1 – Standard Flush Mount
For use when building has a flat, strong wall
and a simple flashing detail. This model
accommodates a fascia board to 6” below
the top of the roof wall.
Powder Coated for Lasting Durability
$449.00
LadderPort ™
Ladder Receiver
LadderPort™ Type 2 – Gutter Saver
Protects your gutters from extension ladder
damage. Use this model when a gutter up
to 8” wide by 8” tall is present. This model
must be attached to a strong wall.
Powder Coated for Lasting Durability
$449.00
LadderPort ™
Ladder Receiver
LadderPort™ Type 3 – Adjustable
Select this model when the wall has a crown
or decorative detail at the top of the wall.
Its telescoping lower attach points easily
adjust & should be attached to a strong wall,
such as masonry (block or brick), providing a
complete stable unit. Drill bit & stainless
steel hardware included for adjusting the
telescoping lower attach points.
Powder Coated for Lasting Durability
$469.00
LadderPort ™
Ladder Receiver
LadderPort™ Type 4 – Adjustable
Select this model when the wall has a crown
or decorative detail at the top of the wall.
Its telescoping lower attach points easily
adjust & should be attached to a strong wall,
such as masonry (block or brick), providing a
complete stable unit. Drill bit & stainless
steel hardware included for adjusting the
telescoping lower attach points.
Powder Coated for Lasting Durability
$489.00
Cranky Portable Winch
Cranky & Cranky Accessories allow one
technician to lift heavier items from vehicle to
roof without the expense of a crane or second
technician.
•Cranky slips on or off the Port-A-Post or
Mounting Post
•Uses a grab hook to tote items up to 300
pounds
•Equipped with a brake to stop the hand crank
for added safety
•Back Pulley used to center loads when
hoisting through a roof hatch
•Crank ratio is 4.4:1
•Weighs only 29 pounds
Cranky Portable Winch
•Powder Coated for Lasting
Durability
•Stainless Steel Telescopic Boom
$589.00
Cranky Portable Winch Mounting Posts
Cranky Portable Winch Mounting Posts
Building Support Post Type 1
Permanent Mounted Post for use with a flat wall
when the mount is flush against the wall.
Stainless steel cap protects post from the
elements.
Building Support Post Type 2
Permanent Mounted Post for use when a gutter
is present. Stainless steel cap protects post from
the elements.
Building Support Post Type 3 (not shown)
Adjustable Mount for use when obstacles are
present.
Cranky Portable Winch Mounting Posts
Building Support Post Type 1
Powder Coated for Lasting Durability
$322.00
Building Support Post Type 2
Powder Coated for Lasting Durability
$322.00
Building Support Post Type 3 (not shown)
Powder Coated for Lasting Durability
$322.00
Cranky Portable Winch Port-A-Post
•Quickly & securely sets on the roof hatch ladder
or other permanent vertical ladder allowing the
technician to easily lift heavy objects such as
compressors and motors directly through the
roof hatch or up the vertical ladder.
•Post includes double clipped rope for toting
Port-A-Post & Cranky to roof
•Slips on in approximately sixty seconds
•No tools required for set up
•$422.00
Cranky Portable Winch Truck/Van Mount
•For use with Cranky Portable Winch to lift heavy
compressors, motors or other parts off the truck
or van.
•Slips into standard 2” Reese Type Receivers
•Van model also available, not shown
•Powder Coated for Lasting Durability
$195.00
Roof Hatch Safety Grab Bars
•Roof Hatch Safety Grab Bars allow safe and
comfortable roof hatch access
•Fully adjustable to fit all standard roof
hatches
•Included drill bits and mounting hardware
make the Grab Bars easy to install
•Meets OSHA Regulation 1910.27(d)(3)
•Caged Roof Hatch Safety Grab Bars provide
an added measure of safety to your existing
roof hatch
•Back Bar option available for non standard
ladder orientation
Roof Hatch Safety Grab Bars
Powder Coated for Lasting Durability
Roof Hatch Safety Grab Bars
$496.00
Roof Hatch Safety Grab Bars & Cage
$989.00
Back Bar for Non Standard Hatch
$150.00
Stair Systems
•Use custom height stair system when
parapet extends above the roofline
•Eliminate the need for jumping off the
ladder to the roof, helping keep technicians
safe
•Includes stainless steel screws and
aluminum diamond plate joiner
•Accommodates parapets heights 10”-60”
Stair Systems
Stair Systems have an adjustable base step for
a true customized fit.
Use the table below to choose the stair system
that best fits your parapet.
Steps
Price
One
Parapet Height Above
Roofline
10” – 20”
Two
21” – 30”
$529.00
Three
31” – 40”
$609.00
Four
41” – 50”
$689.00
Five
51” – 60”
$769.00
$449.00
Accessories
Roof Pad
LadderStrap
Protect your roof from wear & tear
caused by sharp tools, heavy object &
technician use. Non slip rubber.
36”x48”x1/2”
Velcro strap wraps around the top rung
of the bottom section of extension
ladder. Added security measure helps
to secure extension ladder.
Masonry
Drill Bits
Non-Standard
Sizes
16”x9/16”
12”x5/16”
Instructional Wall Sign
Install sign on wall below
LadderPort to insure ladders
are placed correctly.
Mounting
Hardware
Kit
For LadderPort
& Cranky
Accessories
Roof Pad
$40.00
LadderStrap
$19.00
Instructional Wall Sign
Masonry
Drill Bits
$32.00
$28.00
Mounting
Hardware
Kit
$38.00
New Construction for 2008
Basic Package
Package Includes:
•LadderPort™ Type 1, 2
or 3
•Mounting Hardware
•Roof Pad
•Instructional Wall Sign
New Construction for 2008
Basic Package
$527.00*
*Add $20.00 for Type 3
Package Savings of
$28.00
Package Includes:
•LadderPort™ Type 1, 2 or 3
•Mounting Hardware
•Roof Pad
•Instructional Wall Sign
New Construction for 2008
Deluxe Package
Package Includes:
•LadderPort™ Type 1, 2 or 3
•Mounting Hardware for LadderPort™
•Roof Pad
•Instructional Wall Sign
•Cranky Portable Winch
•Cranky Mounting Post Type 1, 2 or 3
•Mounting Hardware for Post
New Construction for 2008
Deluxe Package
$1429.00*
*Add $20.00 for Type 3
Package Savings of
$75.00
Package Includes:
•LadderPort™ Type 1, 2 or 3
•Mounting Hardware for LadderPort™
•Roof Pad
•Instructional Wall Sign
Cranky Portable Winch
•Cranky Mounting Post Type 1, 2 or 3
•Mounting Hardware for Post
New Construction for 2008
Optional Add-Ons
Ladder Strap
$19.00
Parapet Stair System
Custom Pricing
Masonry Drill Bits
$32.00
Retrofit for Existing Locations
Basic Package
Package Includes:
•LadderPort™ Type 1, 2
or 3
•Mounting Hardware
•Roof Pad
•Instructional Wall Sign
Retrofit for Existing Locations
Basic Package
$527.00*
*Add $20.00 for Type 3
Package Savings of
$28.00
Package Includes:
•LadderPort™ Type 1, 2 or 3
•Mounting Hardware
•Roof Pad
•Instructional Wall Sign
Retrofit for Existing Locations
Plus Package
Package Includes:
•LadderPort™ Type 1, 2
or 3
•Mounting Hardware
•Roof Pad
•Instructional Wall Sign
•Custom Height Parapet
Stair System
Retrofit for Existing Locations
Plus Package
One Step
Two Step
Three Step
Four Step
Five Step
$954.00
$1030.00
$1106.00
$1182.00
$1258.00
*Add $20.00 for Type 3
Package Includes:
•LadderPort™ Type 1, 2 or 3
•Mounting Hardware
•Roof Pad
•Instructional Wall Sign
•Custom Height Parapet Stair
System
Retrofit for Existing Locations
Deluxe Package
$1429.00*
*Add $20.00 for Type 3
Package Savings of
$75.00
Package Includes:
•LadderPort™ Type 1, 2 or 3
•Mounting Hardware for LadderPort™
•Roof Pad
•Instructional Wall Sign
•Cranky Portable Winch
•Cranky Mounting Post Type 1, 2 or 3
•Mounting Hardware for Post
Retrofit for Existing Locations
Supreme Package
Package Includes:
•LadderPort™ Type 1, 2 or 3
•Mounting Hardware for LadderPort™
•Roof Pad
•Instructional Wall Sign
•Cranky Portable Winch
•Cranky Mounting Post Type 1, 2 or 3
•Mounting Hardware for Post
•Custom Height Parapet Stair System
Retrofit for Existing Locations
Supreme Package
One Step
Two Step
Three Step
Four Step
Five Step
$1856.00
$1932.00
$2008.00
$2084.00
$2160.00
Package Includes:
•LadderPort™ Type 1, 2 or 3
•Mounting Hardware for LadderPort™
•Roof Pad
•Instructional Wall Sign
•Cranky Portable Winch
•Cranky Mounting Post Type 1, 2 or 3
•Mounting Hardware for Post
•Custom Height Parapet Stair System
Retrofit for Existing Locations
Optional Add-Ons
Masonry Drill Bits $32.00
Ladder Strap $19.00
Locations with a Roof Hatch
Basic Package
Package Includes:
•Roof Hatch Grab Bars (with or without
cage)
•Installation Hardware
•Roof Pad
$515.00*
Package Savings of $26.00
*Add $ 496.00 for Cage, add $150.00
for Back Bar
Locations with a Roof Hatch
Deluxe Package
Package Includes:
•Roof Hatch Grab Bars (with or without
cage)
•Installation Hardware
•Roof Pad
•Cranky Portable Winch
•Port-A-Post
Locations with a Roof Hatch
Deluxe Package
$1470.00*
Package Savings of $77.00
*Add $ 496.00 for Cage, add $150.00 for
Back Bar
Package Includes:
•Roof Hatch Grab Bars (with or without
cage)
•Installation Hardware
•Roof Pad
•Cranky Portable Winch
•Port-A-Post
LadderPort Price List
LadderPort™
Roof Hatch Safety Grab Bars & Cage
Type 1
Standard Mount
Brown/Yellow $449.00
Roof Hatch Grab Bars
Yellow
$496.00
Type 2
Gutter Saver
Brown/Yellow $449.00
Roof Hatch Safety Cage w/ Grab Bars
Yellow
$989.00
Type 3
Adjustable
Brown/Yellow $469.00
Type 4
Pre-Fab Metal Mount
Brown/Yellow $489.00
Yellow
$589.00
“Cranky” Portable Winch
“Cranky”
“Cranky” Portable Winch Mounts
Portable Winch
Parapet Stair Systems
Quickie Portable Post
Brown/Yellow $422.00
One Step
10”-20”
Galvanized
$449.00
Van/Truck Mount
Brown/Yellow $195.00
Two Step
21”-30”
Galvanized
$529.00
Type 1
Standard Mount
Brown/Yellow $322.00
Three Step
31”-40”
Galvanized
$609.00
Type 2
Gutter Saver
Brown/Yellow $322.00
Four Step
41”-50”
Galvanized
$689.00
Type 3
Adjustable
Brown/Yellow $322.00
Five Step
51”-60”
Galvanized
$769.00
Accessories
Mounting Hardware/Drill Kits
Instructional Wall Sign
Includes hardware
$28.00
Mounting Kit
LadderPort & Cranky Posts
$38.00
Roof Pad
Black
$40.00
Drill Installation Kit
LadderPort & Cranky Posts
$32.00
36”x48”
Ladder Safety Strap
Velcro
Black
$19.00
About
LadderTech
• LadderTech was founded in 2004 with a
mission to fill the void in roof access safety.
• Our LadderPort™ & “Cranky” Product Lines
were invented by a Mechanical Contractor
after realizing the need to lift heavy items
effortlessly, seamlessly, safely and
inexpensively.
• LadderTech manufactures a full line of safety
products.
Research & Development
• LadderTech has an onsite research and
development facility.
• LadderTech tests all products thoroughly
before introduction.
• Onsite manufacturing facility allows for easy
changes, modifications and enhancements.
• Customer feedback allows LadderTech to
develop better product lines.
LadderTech product lines are manufactured in
Brighton, Michigan from USA made parts.
All products are patent pending.
Contact Us:
LadderPort
7081 Dan McGuire Drive
Brighton, Michigan 48116
800.770.8851
248.486.2600(fax)
www.ladderport.com
Presented by:
Elise Oras
[email protected]