PROGRESS OVERVIEW: COLTO STANDARD SPECIFICATIONS TMH AND TRH DOCUMENTS OTHER DOCUMENTS
Download
Report
Transcript PROGRESS OVERVIEW: COLTO STANDARD SPECIFICATIONS TMH AND TRH DOCUMENTS OTHER DOCUMENTS
PROGRESS OVERVIEW:
COLTO STANDARD SPECIFICATIONS
TMH AND TRH DOCUMENTS
OTHER DOCUMENTS
COLTO STANDARD SPECIFICATIONS
Prepared Business Plan for RCB
Formation of RCB Subcommittee
RCB Subcommittee Membership
• National DOT
• 9 Provincial Road Authorities
• Municipal Authorities (Metro’s)
• SANRAL (SA National Roads Agency Ltd)
• RAL (Road Agency Limpopo)
• JRA (Johannesburg Road Agency)
COLTO STANDARD SPECIFICATIONS
Stakeholders identified for consultation:
• SAICE
• CSIR
• SAACE
• RPF
• SAFCEC
• SABTACO
• SABITA
• C & CI
• ASPASA
COLTO STANDARD SPECIFICATIONS
Procurement of Secretariat for the Revision of
the Document
• RCB Subcommittee to nominate list of service providers (April
2008)
• SANRAL to prepare tender documents (May 2008)
• SANRAL to invite nominated service providers (June 2008)
• SANRAL to appoint service providers (July 2008)
COLTO STANDARD SPECIFICATIONS
Programme
• Subcommittee will set up programme
• Estimated completion time – 18 to 24 months
Funding
•All RCB subcommittee members to contribute
• Estimated cost of project ± R4million
TMH AND TRH DOCUMENTS
2 500 People have visited the SANRAL website to download
documents
TMH1 Revision
• The final revised drafts were submitted to SABS in January 2008
SET A – Covers roughly A1 to A5 of TMH1
• 3001-GR1 The Wet Preparation and Particle Size Analysis of Graded Materials.
• 3001-GR10 The Determination of the One-Point Liquid Limit, Plastic Limit, Plasticity
Index and Linear Shrinkage.
• 3001-GR11 The Determination of the Liquid Limit, Two-Point Method.
• 3001-GR12 The Determination of the Liquid Limit, Flow Curve Method.
• 3001-GR20 The Determination of Moisture Content by Oven-Drying.
TMH AND TRH DOCUMENTS
SET B – Covers roughly A6 and B18 of TMH1 and two new methods
• 3001-GR2 The Dry Preparation and Dry Particle Size Analysis of Graded
Materials.
• 3001-AG2 The Determination of the Average Least Dimension of Aggregates by
Direct Measurement.
• 3001-PR2 The Determination of the Average Least Dimension of a Surfacing
Aggregate by Computation.
• 3001-PR3 The Computation of soil-mortar percentages, coarse sand ratio, grading
modulus and fineness modulus.
SET C – Covers A7 and A8 of TMH1
• 3001-GR30:06 The Determination of the maximum dry density and optimum
moisture content of graded materials.
• 3001-GR31:06 The Determination of the California Bearing Ratio of graded
materials.
TMH AND TRH DOCUMENTS
The production of essential normative reference methods
which are being done in the next phase were needed before
SABS can publish Sets A to C.
Work on next phase (Sets 1 to 5) is progressing well
SET 1
• 3001-AG1 The particle size analysis of aggregates by sieving. **
• 3001-AG3 The determination of the flakiness index of coarse aggregate.
• 3001-AG10 Aggregate crushing value of coarse aggregates.
• 3001-AG11 FACT value (10% fines aggregate crushing value) of coarse
aggregates.
• 3001-AG20 The determination of the dry bulk density, apparent relative density
and water absorption of material retained on the 5mm sieve.
• 3001-AG21 The determination of the dry bulk density, apparent relative density
and water absorption of material passing the 5mm sieve.
** Needs to be given priority as it is required as a normative reference for methods in
Pilot Stage.
TMH AND TRH DOCUMENTS
SET 2
• 3001-GR31 The determination of the maximum dry density and optimum moisture
content of laboratory mixed stabilized graded materials.
• 3001-CO1 Mixing in the laboratory, sampling of freshly mixed concrete, casting
and curing of test specimens.
• 3001-CO2 Consistency of freshly mixed concrete – the determination of the slump.
• 3001-C10 Dimensions, tolerances and uses of cast test specimens.
• 3001-C11 Compressive strength of matured concrete.
• 3001-PR10 The handling, maintenance and sieving techniques for test sieves. **
** Needs to be given priority as it is required as a normative reference for methods in Pilot Stage.
TMH AND TRH DOCUMENTS
SET 3
First drafts have been submitted by SABITA to their members for comment.
MTC had a meeting in January 2008 with SABITA regarding these test
methods.
• 3001-AS1 Making of briquettes for Marshall tests
• 3001-AS2 The determination of Marshall flow and stability
• 3001-AS10 The determination of bulk relative density and void content of
compacted asphalt
• 3001-AS11 The determination of the maximum theoretical relative density of
asphalt mixes and the quantity of binder absorbed by the aggregate
• 3001-AS20 The determination of the binder content of a bituminous mixture
(indirect method).
TMH AND TRH DOCUMENTS
SET 4
Second drafts have been prepared based on industry feedback.
• 3001-GR31 The determination of the maximum dry density and optimum moisture
content of laboratory mixed stabilized graded materials.
• 3001-GR50 The preparation, compaction, and curing of specimens of laboratory
mixed stabilized graded materials.
• 3001-GR51 Sampling, preparation, compaction and curing of field mixed freshly
stabilized graded materials including the determination of the maximum dry density
and optimum moisture content.
• 3001-GR52 Sampling and preparation of cored specimens of field compacted
matured stabilized graded material.
• 3001-GR52 The determination of the Unconfined Compressive Strength of
stabilized graded materials.
• 3001-GR53 The determination of the Indirect Tensile Strength of stabilized graded
materials.
TMH AND TRH DOCUMENTS
SET 5
• 3001-BT20 Calibration of dipsticks for bitumen distributors
• 3001-BT22 Power and road speed indicator tests for bitumen distributors
• 3001-BT23 Pump system performance for bitumen distributors
• 3001-BT24 Test for measuring the transverse distribution of a bitumen distributor
(“Bucket” test)
TMH AND TRH DOCUMENTS
Busy with second drafts on stabilization
Investigation into calibration, validation and standard
blocks for nuclear gauges was completed in December
2007.
Will not submit further material to SABS until they
have made progress with pilot phase. (Sets A to C)
TMH AND TRH DOCUMENTS
TRH Revisions
• TRH 12: Road Rehabilitation Guidelines – Feedback by
Dr Jordaan
• TRH 20: The structural design construction and
maintenance of unpaved roads.
OTHER DOCUMENTS
Routine Road Maintenance Guideline Document
• Busy with revision of final draft
• Plan to have workshops in June 2008
OTHER DOCUMENTS
South African Materials Manual
• Finalised frame work / scope of work
• Task team approved
• Made PDF’s of Road Authority Manuals
• Need to set up meeting with Task Team to discuss:
− Scope of work
− Hourly rate
− Timelines
− Task leaders
THANK YOU!