Transcript Welding/Metal Working Tool Id

Welding/Metal Working Tool Id
Next Generation Science/Common Core Standards Addressed!
CCSS.ELALiteracy.RST.9‐10.4 Determine the meaning of symbols, key
terms, and other domain‐specific words and phrases as they are
used in a specific scientific or technical context relevant to grades
9–10 texts and topics.
CCSS.ELALiteracy.RST.9‐10.7 Translate quantitative or technical
information expressed in words in a text into visual form (e.g., a table
or chart) and translate information expressed visually or mathematically
(e.g., in an equation) into words.
CCSS.ELALiteracy.RST.11‐12.9 Synthesize information from a range
of sources (e.g., texts, experiments, simulations) into a coherent
understanding of a process, phenomenon, or concept, resolving
conflicting information when possible.
Abrasive Cut-Off Saw
 Abrasive saw blade material is used to cut metal.
Acetylene Regulator
 Used to reduce the high acetylene cylinder pressure to
a workable constant prssure. Hose and cylinder
connections are left handed threads.
Brazing Rod
 Used as a filler rod when braze welding. May or may
not be flux coated.
Copper Coated Mild Steel Welding
Rod
 Used as a filler rod for mild steel oxy-fuel welding. The
copper coating prevents rusting
Cutting Torch Tip
 Used with a cutting torch handle when oxy-fuel
cutting. The tip size is determined by the thickness of
the metal.
Cutting Torch
 Used with the cutting tip when oxy fuel cutting steel.
Electrode
•A coated metal wire used for shielded
metal-arc welding a variety of metals.
Electrode
Holder
•Used to mechanically hold the electrode
while conducting current from the electrode
lead.
Flashback Arrestor
 Used to limit damage from a flashback by allowing the
gases to flow in only one direction, preventing the
flame from burning back into the equipment.
Friction Lighter
 Used to light torch’s for cutting and welding. Safer
than using matches or a lighter.
Ground Clamp
•Used to connect the ground lead (cable) to
the work. This provides a completed
electrical circuit.
Inert Gas Regulator
 Regulates shielding gases such as argon, helium and
carbon dioxide. Used for MIG and TIG welding.
Leather Gloves
•Used to protect the hands from the
ultraviolet rays and spatter of hot metal.
MIG Tips
 MIG tips guide the welding wire through the gun
nozzle.
MIG Welding Gun
 Used to deliver the wire and shielding gas to the weld
surface.
MIG Wire
 Used as filler wire for the MIG welding process. May
be bare wire or flux cored.
MIG Nozzle Gel
 Coating applied to lubricate the welding wire and tip
for smoother wire flow during the welding process and
cut down on splatter.
Oxygen
Regulator
•Used to reduce the high oxygen cylinder
pressure to a workable constant pressure.
Hose and cylinder connections are righthanded threads.
Pipe Cutting Guide
 A variety of different types of guides that clamp
around pipe to aid in cutting angles etc. Pipe cutting
guides are available in a variety of sizes.
Porcelain Gas Cup
 Non-metallic cup that directs the flow of shielding
gases when TIG welding.
Protective Leather, sleeves, apron
or coat
 Used to protect the body from harmful ultraviolet rays
and hot molten spatter while welding.
Slag or Chipping
Hammer
•Used for slag removal from shielded
electrode weld.
Tip Cleaner
•Used to clean and partially recondition both
welding and cutting tips.
Torch Handle
 Used to mix fuel gasses and oxygen in the correct
proportions.
Tungsten Electrode
 Non-consumable electrode that generates the arc
when TIG welding. Can be purchased in a variety of
sizes.
Vise Grip Welding Clamp
 With its flat and “U” shaped jaws, it is used to clamp
metals quickly.
Welding/Cutting
Goggles
•Used to protect eyes from damaging light
rays and heat rays that may prove
destructive to eye tissue. Should not be
used for arc welding.
Welding Helmet
•Used to protect the eyes and face from the
harmful arc rays and molten spatter
produced when arc welding.
Welding Tip
•Used for all types of oxy-fuel brazing and
welding.
Wire Brush
•Used to prepare metal for welding or
cutting. Removes slag or rust . May be used
to clean parts of machinery.
The End!