Transcript SM8- tOp2

SM8
Electronic seamlesswear knitting machines
A 3080 mm
B 740 / 840 mm
C 2100 mm
D 3100 mm
E 2600 mm
F 2410 mm
Sm8- TOP2
single jersey
Sm8- TOP2 single jersey
Single Jersey electronical circular machine with 8 feeds with 2 points of selection per feed.
For the production of single seamless
garments for underwear, outerwear,
beachwear, sportswear, sanitarywear.
Terry possibility on request.
System patented by SANTONI that allows
the realization on 8 feeds of patterns having an high definition and sharpness of
the colour.
Macchina circolare elettronica monofrontura a 8 cadute, con 2 punti di selezione
ago-ago ad ogni caduta di maglia, per la
produzione di capi singoli seamless-wear
per maglieria intima, esterna, da bagno,
sportiva, sanitaria.
A richiesta: possibilità di realizzare maglia
in spugna.
Sistema brevettato SANTONI per consentire la realizzazione a 8 cadute di disegni
con elevata definizione e nitidezza del
colore.
Diameters
12” - 13” - 14” - 15” - 16” - 17” - 18” 19” - 20”.
Machine Gauge
Npi. 16 - 18 - 20 - 22 - 24 - 26 - 28 - 32
- 40.
Needles Gauge
From gg 48 to gg 80.
Number of feeds
8 for any diameter.
Max. speed
For 12” gauge speed factor from 1200
(12” max speed 100 rpm) – For 13” gauge
speed factor from 1430 (13” max speed
110 rpm) For E40gg speed factor from
1250 (13” max speed 95 rpm)
Type of selection
16 level actuators (2 per feed)
Stripping yarn fingers
8 yarnfingers per feed being: (with yarnfinger 1 and 2 at 3 positions, the 3rd at 2 positions, the 4th and 5th at 4 positions and the
6th at 6 positions) plus 2 colour yarnfinger
at 2 positions.
Trappers for bare and covered elastic
yarn
One each feed plus 2nd trapper for elastic
welt on 2nd and 6th feed. On request: 2nd
trapper on 4th and 8th feed or on 1st - 3rd 4th - 5th - 7th - 8th)
Jacks dial & yarn cutter
From 12” to 17” up and down dial movement by pneumatic control.
From 17” to 20” up and down dial movement driven by step motor to reposition
the saw blade height.
Suction system
By 2 suction fans or central system.
Take down tube Ø150 mm. Garment transfer tube diam. Air limiting valve with electronic incremental programmation.
On request Antitwist kit with rotating tube.
Stitch cams
Stitch formation adjustment by step motors, independently on each feed, with
possibility of loop widening, tightening
and shading on the same course (Santoni
patent). On board garment sizing, adjustable in both cms. or inches.
Sinker cap for Terry
On request: sinker caps for terry fabric.
Main knitting possibilities
Single or double welt carried on with jacks,
in several selections, with knitted, floated
or laid-in elastic yarn.
with 8 feeds on the same course: 3 technical ways, 2 technical ways plus one colour
on the ground yarn clear pattern & laid-in
possibility on all feeds.
Optional: n° 4 movable stich cams to make
4 feeds with the following knitting possibilities:
3 technical ways plus 2 colours on the
ground, 3 technical ways plus one colour
on the ground yarn and floated pattern.
Yarn feeders
1 MEMMINGER SFE for each feed;
n° 10 BTSR ULTRAFEEDER (2 of which
used for elastic welts) plus n°8 feeders
LGL SANTONI VECTOR with serial connection enabling visualization on board
display of yarn absorption.
Optional: BTSR ULTRAFEEDER, MEMMINGER EFS800 -SFE -ELAN – ROJ
TRICOT – LGL SANTONI VECTOR and/or
VECTOR ATTIVO – DINEMA YOYO.
Yarn sensors
Optical sensors on each feed (64 in total).
Creel
Complete back creel: on request creel with
pneumatic threading -in or closed creel for
cotton kit.
Lubrication
Pneumatic pump with oil recycle.
Cylinder rotation
Brushless motor and electronic handwheel for manual control.
Electronic controller
HIE (High Electronic Integration) with an
integrated board for the serial checking
of all exits, protected from short circuit.
Available RAM memory: 6 MB.
Machine Key board
With monocromatic display back lighted.
Programming
Software Digraph-3 Plus including: Atlas,
Photon, Galois. The programs can be
transferred to the machine by FDU-2/FDU3 reader, by cable directly from the P.C. Or
by USB key.
On request: kit PULSAR.
Consumption
Absorbed power: from 12” to 16”: from
fans 4,1 Kw (at 400/50Hz) or 5,1Kw (at
220V/60Hz); from motor 2,2Kw from 17”
to 20”: from fans 4,4Kw (at 400/50Hz) or
5,6Kw (at 220/60Hz); from motor 2,2 Kw.
Compressed air: 50lt/1” at 6 bar.
Weight
Approx. Kg 620/770.
Production
SEAMLESS-WEAR, UNDERWEAR, OUTERWEAR, SWIMWEAR, SPORTSWEAR,
SANITARY GARMENTS (possibility to use
a wide range of yarns).
Normative
The machine meets the C E normative and
is UL compatible.
Diametri
12” - 13” - 14” - 15” - 16” - 17” - 18” 19” - 20”.
Finezza Macchina
Npi 16 - 18 - 20 - 22 - 24 - 26 - 28 - 32
- 40.
Finezza Ago
Da gg 48 a gg 80.
Numero delle cadute
8 per tutti i diametri.
Velocità massima
Diametro da 12” velocità da 1200 (12” velocità massima 100 rpm).
Diametri da 13” a 20” velocità da 1430
(13” velocità massima 110 rpm).
mc finezza Npi 40 velocità da 1250 (13”
velocità massima 95 rpm).
Tipo di selezione
Attuatori a 16 livelli n° 2 per caduta.
Guidafili rigatori
N° 8 guidafili ogni caduta, (con il guidafilo
1 e 2 a tre posizioni, il 3 a due posizioni, il 4
e 5 a quattro posizioni ed il 6 a sei posizioni), più due guidafili colore a due posizioni.
Pinze per elastomeri nudi e ricoperti
n° 1 per caduta, più 2ª pinza, per bordo
elastico, su 2ª e 6ª caduta. A richiesta: 2ª
pinza su 4ª e 8ª caduta o su 1ª- 3ª- 4ª- 5ª7ª- 8ª).
Platorello uncini e seghetta rasafili
Da 12” a 17”: movimento verticale del platorello ottenuto con comando pneumatico.
Da 18” a 20”: movimento verticale del platorello, azionato da motore passo-passo,
che consente di variare l’altezza di lavoro
della seghetta.
Tiraggio
Aspirazione con due ventole o con impianto centralizzato. Tubo interno formazione
maglia Ø150 mm tubo passaggio capo
Ø100 mm. Valvola parzializzatrice a programmazione incrementale elettronica. A
richiesta: kit Antitwist con tubo rotante.
Camme formazione maglia
Regolazione formazione maglia mediante
motorini passo passo, indipendenti per
ogni caduta con possibilità di allargamento, restringimento e sfumature sullo stesso rango maglia (brevetto Santoni). Ottimizzazione delle taglie a bordo macchina
con regolazione in centimetri o pollici.
Custodia camme platine
A richiesta: custodia camme platine per
maglia spugna.
Principali lavorazioni
Bordo singolo o doppio, realizzato con
uncini, in diverse selezioni ad elastico immagliato, tramato o flottato.
A 8 cadute sullo stesso rango: 3 vie tecniche, 2 vie tecniche più 1 colore sul filo di
fondo, disegno nitido.
Possibilità di tramato su tutte le cadute. A
richiesta: n°4 triangoli di maglia mobili per
lavorazioni a 4 cadute con: 3 vie tecniche
più 2 colori sul filo di fondo, 3 vie tecniche
più 1 colore sul filo di fondo e disegno a
filo flottato.
Alimentazione fili
n° 1 Memminger SFE per caduta.
n° 10 BTSR ULTRAFEEDER (2 dei quali
utilizzati per bordi elastici), più n° 8 alimentatori LGL Santoni VECTOR con collegamento seriale e visualizzazione dei valori
di assorbimento filo sul display macchina.
Optional: BTSR ULTRAFEEDER; MEMMINGER EFS800 - SFE - ELAN - ROJ TRICOT; LGL Santoni VECTOR e/o VECTOR
ATTIVO; Dinema YOYO.
Sensori per scorrimento fili
n°1 sensore seriale di tipo ottico per ciascun guidafilo (tot. 64).
Portarocche
Completo di cantra posteriore.
A richiesta: cantra con infilaggio pneumatico o cantra chiusa per kit cotone.
Lubrificazione
Centralina a comando pneumatico con
riciclo olio.
Movimento macchina
Motore Brushless e manovella elettronica
per movimento manuale.
Controller elettronico
Elettronica HIE (High Integration Electronic) con scheda integrata Dinema per il
controllo seriale di tutte le uscite protette
da cortocircuito.
La memoria RAM disponibile è di 6 MB.
Tastiera macchina
A colori con display monocromatico retroilluminato.
Programmazione
Pacchetto Digraph 3 plus comprendente
Atlas, Quasar, Photon, Galois. I programmi si possono trasferire in macchina con
cavo computer o tramite FDU-2 / FDU-3
o con chiave USB. A richiesta: pacchetto
PULSAR.
Consumi
Potenza assorbita da 12” a 16”: dalle ventole 4,1Kw (a 400V e 50Hz) o 5,1Kw (a
220V e 60 Hz); dal motore 2,2Kw.
Potenza assorbita da 17” a 20”: dalle ventole 4,4Kw (a 400V e 50Hz) o 5,6Kw (a
220V e 60 Hz); dal motore 2,2Kw.
Aria compressa 50 litri/1’ a 6Bar.
Pesi
Kg 620/ 770 ca.
Produzione
SEAMLESS-WEAR, INTIMO, ESTERNO,
BAGNO, SPORTIVO, SANITARIO (consentendo l’utilizzo delle più svariate tipologie
di filato elastomeri nudi e ricoperti).
Normative
La mc è conforme alle normative C E ed è
UL compatibile.