Transcript AMSS Procedures Instructor: Spc Bragg References AR 700-138, 16 June 1993, Army Logistics Readiness and Sustainability, with the exception of "Table B-1". Materiel Condition Status.

AMSS Procedures
Instructor: Spc Bragg
References
AR 700-138, 16 June 1993, Army
Logistics Readiness and Sustainability,
with the exception of "Table B-1".
Materiel Condition Status Reporting
System - Reportable Items List (Updated
semi-annually).
Unit Level Logistics System -- Ground
(ULLS-G) End User Manual (EUM), 15
June 1996.
What is ULLS?
ULLS is a menu driven, real-time (non-batch)
system which supports multiple con-concurrent
users.
ULLS contains basic access control for data
security in database. Authorized users in ULLS-G
are classed by DODAAC. In ULLS-A and ULLS-S4
the users are classed by UIC. All three baselines
use a security system controlled by a user ID and
password.
What is ULLS? (Cont.)
ULLS includes software to automate or replace the
maintenance and supply documents and processes.
Many of the processes produce reports, which are
very useful for managing both the supply and the
equipment maintenance functions of the unit.
The ULLS system is mobile, and the current plan
is that it will be taken with the units wherever
they go.
What is AMSS?
The Commander’s Guide for the Unit Level Logistics
System-Ground identifies key AMSS reports that can
be used to monitor readiness. These reports provide
non-mission-capable information for reportable
equipment, including systems and their associated
subsystems. Unit personnel can run these reports
any time during the report period at the unit level.
Three of these reports can be rolled up to the
battalion or brigade level. One of these reports--the
Projection Report--displays projected FMC and NMC
rates for all reportable equipment items in order to
identify equipment that may not meet the DA goal for
the period.
What is AMSS (Cont.)
Unit commanders should determine the frequency for
generating AMSS reports and the positions
responsible for reviewing such reports in their unit
SOP for ULLS-G or in their maintenance SOP.
Commanders should do the same for systemgenerated maintenance and supply reports. In doing
so, commanders provide their ULLS-G operator with
a guide that describes how often they need to
produce each report and who should receive the
report.
Daily Reports
Several AMSS reports are available to
the user, daily. The Send AMSS
Transactions to Higher Level can also
be processed daily to provide battalion
level reporting. The following procedure
is used for selecting each report. The
two “most popular” reports are:
Daily Reports (Cont.)
Projection Report:
This can be run at any
time and projects end of
period readiness based
upon data processed to
date. This is what your
readiness report will
reflect if there are no
other changes.
Non-Mission Capable
Report:
Provides the same
information as the
“Backside 2406”.
Running the AMSS
The Army Material Status System (AMSS): The
AMSS "End of Report Period" process will be
run at the start of the 16th of the month if it is
a business day, or the first business day
following the 16th of the month. This report is
run to capture the data ending on the 15th.
This report contains data that units need to
complete their monthly Unit Status Report
(USR) and Readiness Reports. The Following
steps spell out the proper sequence of events to
accomplish the AMSS - "END OF REPORT
PERIOD" process.
Before Running AMSS
Back-up your
database
This is the most
important step. This
ensures that if a
problem arises that
no data is lost.
Backing up is
mandatory for all
shops to do on a daily
basis.
Verify Information
Take time here to
verify unit data. The
reporting UIC must
be the "AA" entity.
For companies in a
BN the reporting UIC
is the BN UIC. Also
verify the reporting
date is correct.
Verifying Information
(1) From the main menu key in "F" and press
enter.
(2) Type "1" and press enter.
(3) Select update and press enter.
(4) Type the class IX DODAAC and press enter.
(5) Type the Commanders password and press
enter.
(6) The system will show Unit Parameter Update
screen.
(7) Select Unit parameter.
(8) Verify data and ensure that BN indicator is
set to "N"
End of Report Period
Process
(1) From the main menu select "N" and press
enter.
(2) Next select "2" and press enter.
(3) The system will display the Send AMSS
Transactions Higher screen.
(4) Use the arrows keys and the spacebar to
select the correct UIC(s).
(5) The system will then display the device menu
screen.
(6) Select the right disk drive and press enter.
End of Report Period
Process (Cont.)
(7) The system displays a prompt
informing you of the required number of
diskettes.
(8) Insert the first disk and press enter.
when this is complete remove the
diskette and label it with the unit's UIC,
name, file name, and "Send To Higher".
Receive From Lower
Process
Units that have received information
from lower must do this process
(1) From the main menu select "N" and
press enter.
(2) Next select "3" and press enter.
(3) The system will display the device
menu.
(4) Insert the first disk into the right
drive.
Receive From Lower
Process (Cont.)
(5) Select the appropriate disk drive and
press enter.
(6) Repeat the process until all "Send to
Higher" diskettes have been entered. This
is to include the parent unit. For
example, the company and the
detachment(s).
Print “Roll-up By UIC”
This process consolidates, by UIC, all
reportable systems/subsystems and End
Items that have accumulated an NMC
time during the reporting period.
Print “Roll-up By UIC”
(Cont.)
(1) From the AMSS options menu key in "1" and
press enter.
(2) The system will display the AMSS Rollup By
UIC screen with the prompt: "Rollup By
Reporting UIC (Y)es or (N)o." If Yes is selected,
the report will consist of all reportable systems,
subsystems and end items by EIC consolidated
for the list shown.. If no is selected, the system
will prepare individual unit reports for the
selected UIC(s).
NOTE
The companies that have rolled up
detachments and need to "Send to
Higher" to report to a battalion
headquarters will perform the "Send To
Higher" process again. Repeat the
processes in step (b), (c), and (d)
above. The remaining units proceed to
step (l) "End Of Report Period" process.
Receive From Lower
Level
Units that have received information from lower
must do this process.
(1) From the main menu select "N" and press
enter.
(2) Next select "3" and press enter.
(3) The system will display the device menu.
(4) Insert the first disk into the right drive.
(5) Select the appropriate disk drive and press
enter.
(6) Repeat the process until all Send to Higher
diskettes have been entered. This is to include
the parent unit. For example, the company and
the detachment(s).
Print “Roll-Up By UIC”
This process consolidates, by UIC,
all reportable systems/subsystems
and End Items that have
accumulated an NMC time during
the reporting period.
Print “Roll-Up By UIC”
(Cont.)
(1) From the AMSS options menu key in "1" and
press enter.
(2) The system will display the AMSS Rollup By
UIC screen with the prompt: "Rollup By
Reporting UIC (Y)es or (N)o." If Yes is selected,
the report will consist of all reportable systems,
subsystems and end items by EIC consolidated
for the list shown.. If no is selected, the system
will prepare individual unit reports for the
selected UIC(s).
NOTE
Two (2) copies of the AMSS report
"ROLL-UP BY UIC" will be
forwarded; one to each Bn or
Separate (AA) unit’s supply
sergeant, one to the O-6 level
command S-4 section.
End of Report Period
This process may be executed on or after the
16th of the month. It will save the appropriate
data files from which the Materiel Status Report
transaction files will be created. The process will
also prepare the appropriate files for time
accumulation for the next reporting period and
usage data. Finally, the process will place the
current period end date in the transfer data field
in each record.
(1) From the AMSS options menu key in "6" and
press enter
(2) The system will display the "Create AMSS
Transaction To SAMS" Options menu.
(3) Select "Send AMSS Transactions to SAMS"
via Diskette.
(4) The system will display a warning screen.
Six conditions are listed to indicate actions that
must be taken prior to running the process.
Ensure you have 2 blank formatted floppy
diskettes "3.5 inch 1.44m" Statements also
included indicating the end of the current
reporting period and that the AMSS report date
will be set the the next reporting period. Below
the warning screen is the prompt: "Do You Wish
To Continue (Y/N)"
(5) Key in "Y" and press enter.
(6) The system begins the process and when
complete displays the device menu screen.
(7) Insert the first diskette into the drive.
(8) Choose the right disk drive and press enter.
(9) The system will prompt you to remove the
first diskette and press enter. Do so.
(10) The printer will print out the AMSS and
Usage data copied from the diskette.
(11) The system will prompt you to insert the
next diskette. Do so.
(12) The system will prompt you to remove the
diskette and press enter. Again do it.
(13) The printer will print a DA form 2715
Feeder Report.
(14) The system returns to the Create AMSS
Transactions To SAMS options menu.
End of Report Period
(Cont.)
Disk one (1) produced during the "End
Of Report Period" Process is the file
named AWAME130.dat and will be sent
directly to the SSMO via blast. The
second disk is to be used by ULLS-S4,
currently fielded. Send this disk to the
CO/BN S-4 for input into the ULSS-S4.
NOTE: Always refer to the EUM for
further clarification on any process.
Print/Display NMC
Listing
(1) From the ULLS-G main menu screen
key in "k" and press enter.
(2) From the Equipment Data reports
menu key in "6" and press enter.
(3) The system will display the NonMission Capable Equipment menu.
(4) Print by DODAAC. Key in "2" and
press enter.
Print/Display NMC
Listing (Cont.)
(5) The system will display the NonMission Capable Equipment screen.
(6) Key in the DODAAC and press
enter or press enter for the logon
DODAAC.
(7) The system will produce the
printout and return to the NonMission Capable Equipment screen.
Roll-Up By Supporting
UIC
SOURCE:
process.
FREQUENCY:
Display/Print
PURPOSE:
Provides a rollup of Not Mission
Capable time for all reportable
and end items.
systems
DISPOSITION:
AMSS
Reports
Review weekly or IAW local SOP.
Dispose of IAW local SOP or the
Modern Army Record Keeping
System (MARKS).
MANAGEMENT APPLICATIONS:
This report shows readiness data for al systems and
reportable end items. It can be run anytime during the
reporting period. Report can be for a unit or a rollup by
reporting battalion/brigade.
ARMY MATERIEL STATUS SYSTEM
(AMSS)
ROLLUP BY REPORTING UIC
REPORT PERIOD:
19970716 - 19970815
DATE RANGE:
19970716- 19970815
REPORT DATE/TIME:
19970816 - 09:52:05
UIC:
W33UIC
UNIT NAME & LOCATION:
D TROOP, 6TH CBAC
FT HOOD TX 76544
NOMENCLATURE
EIC
WPN
AUTH O/HPOSS AVAIL
--- ORG ----- SPT ---NMCD NMCE
FMC%
EIC
HRS/DAYSHRS/DAYS NMCS
NMCM NMCS
NMCM
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------TRK UTIL .75T
BEB
11
30 30
100
--QUANTITY ON HAND IS ZERO FOR EIC CEC
LOADER SCOOP
GG
01
30 30
100
---
TANK CBT FT
AAB
44
120116 2
12
88.3
11.7
CARRIER, MTR
ER
11
30 22
TANK/PUMP UNIT
ZBE
21
30 28
7
1
73.3
26.7
1
1
93.3
6.7
NMC%
Roll-Up By End Item
Code
SOURCE:
process.
FREQUENCY:
Display/Print AMSS Reports
Review weekly or IAW local SOP.
PURPOSE:
Provides by UIC, a consolidated
report
by EIC sequence, of all
reportable
systems/subsystems
and end items that
have
accumulated any NMC time
during the reporting period.
DISPOSITION:
or
Dispose of when no longer needed
IAW local SOP.
MANAGEMENT APPLICATIONS:
Provides readiness data for all systems/subsystems and
end items.
- Run anytime during the report period.
- Available by Unit or rollup by reporting Bn/Bde.
- Use to identify NMC subsystem of a reportable system
and reason for NMC status.
ARMY MATERIEL STATUS SYSTEM
(AMSS)
ROLLUP BY REPORTING EIC
REPORT PERIOD:
19970716 - 19970815
DATE RANGE:
19970716 - 19970815
REPORT DATE/TIME:
19970816 - 09:53:11
UIC:
W33UIC
UNIT NAME & LOCATION:
D TROOP, 6TH CBAC
FT HOOD TX 76544
EIC
HRS/DAYS
HRS/DAYS
NMCS
NMCM NMCS
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------TRK UTIL .75T
BEB
1
1
31
31
100
---
NMCM
TANK CBT FT
12
RADIO SET
RADIO SET
AAB
GAE
AAB
AAB
GCG AER
4
4
1
4
3
1
124
93
31
110
2
88.7
11.3
100
---
93
22
8
71.0
1
29.0
Organizational Class XI
Failure Data By Admin
Number
SOURCE:
FREQUENCY:
PURPOSE:
Display/Print AMSS Reports process.
Review weekly or IAW local SOP.
Provides a recapitulation of all
reportable systems or subsystems with
accumulated Non-Mission Capable
Supply (NMCS) time and the parts
information causing the system or
subsystem to be NMC.
DISPOSITION: Dispose of when no longer needed or
IAW local SOP.
MANAGEMENT APPLICATIONS:
This report shows the NMC time for each system or
subsystem by Admin Number.
It shows the equipment model and parts on order, with
the NMCS and NMCM time in days or hours.
ARMY MATERIEL STATUS SYSTEM
(AMSS)
ORGANIZATIONAL CLASS IX FAILURE DATA BY ADMIN NUMBER
REPORT PERIOD:
19970716 - 19970815
DATE RANGE:
19970716 - 19970815
REPORT DATE/TIME:
19970816- 09:30:57
UIC:
W33U1C
UNIT NAME & LOCATION:D TROOP, 6TH CBAC
FT HOOD TX 76544
ORG
EST.
ADMIN
EQUIP
NMCS
NMCM NMC PARTS QTY
QTY
SHIP
NUMBER MODEL HRS/DAYS
HRS/DAYS
NOUN
D/I
RECVD
DATE DOCUMENT NO.
NIIN PART NO.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------D10
M3
15
0
LATCH,THUM
00001
00000
----- W45U7D72130026 000918742
D12
D30
M3NO NMC PARTS ON ORDER
M3NO NMC PARTS ON ORDER
D31
M3
0
27
CLAMP,LOOP
00003
00000
-----
W45U7D72070025
000509077
Non-Mission Capable
Report
SOURCE:
FREQUENCY:
PURPOSE:
subsystems by
DISPOSITION:
Materiel Readiness Processes,
Display/Print AMSS Reports.
Review Daily or IAW local SOP.
Provides a recapitulation of all
reportable
systems
and
Admin Number.
Dispose of IAW local SOP.
MANAGEMENT APPLICATIONS:
This report shows by Admin Number the total NMC time
accumulated for a reportable system or the subsystem
configured to it.
The printout lists the subsystems by Admin Numbers and
the NMC time in percentages for the different NMC categories.
The printout will show the UIC and date range, which is
the beginning of the current report period until the day the report
is executed.
ARMY MATERIEL STATUS SYSTEM
(AMSS)
NON MISSION CAPABLE REPORT
REPORT PERIOD:
19970716 - 19970815
DATE RANGE:
19970716 - 19970815
REPORT DATE/TIME:
19970815 - 09:55:07
UIC:
W33U1C
UNIT NAME & LOCATION:
D TROOP, 6TH CBAC
FT HOOD TX 76544
ADMIN
EIC
MODEL
WPN
FMC%
NMC%
ORG
SPT
NO
EIC
NMCS%
NMCM% NMCS%
NMCM%NMCD% NMCE%
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------D1
BBG
M1026WW
58.1
41.9
25.8 16.1
D10
APB
M3
APB
51.7
48.3
D12
APB
M3
APB
48.4
51.6
D13S
4TE
M242
45.2
54.8
48.3
51.6
25.8
29.0
System Status Summery
SOURCE:
FREQUENCY:
Materiel Readiness Processes,
Display/Print AMSS Reports.
Review weekly or IAW local SOP.
PURPOSE:
Provides a rollup of all reportable
equipment by weapon system EIC.
DISPOSITION:
Dispose of IAW local SOP.
MANAGEMENT APPLICATIONS:
This report explains NMC time by equipment/nomenclature
and model and is keyed by date range, and UIC and equipment
with the authorized and on-hand quantities given.
The FMC/NMC percentages by level are also given on this
report.
ARMY MATERIEL STATUS SYSTEM
(AMSS)
SYSTEM STATUS SUMMARY
REPORT PERIOD:
19970716 - 19970815
DATE RANGE:
19970716 - 19970815
REPORT DATE/TIME:
19970815 - 09:32:33
UIC:
W33U1C
UNIT NAME & LOCATION:
D TROOP, 6TH CBAC
FT HOOD TX 76544
NOUN
MODEL
AUTH
O/H
FMC%
NMCS%
NMCM%
NMCE%
NMCD%
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------QUANTITY ON HAND IS ZERO FOR EIC 4TE
TRK UTL ARMT CARR
M1026WW
2
2
79.1
12.9
8.0
---
---
TRK CGO 2.5T 6X6 WE
M35A2
1
1
71.0
---
29.0
---
---
1
100
TRK UTIL .75T
M1009
1
---
---
---
---
Equipment Exception
Report
SOURCE:
FREQUENCY:
PURPOSE:
Materiel Readiness Processes,
Display/Print AMSS Reports.
Review daily or IAW local SOP.
Admin
meet the DA
Provides a listing of all reportable
systems or subsystems by
Number that do not
goal of 90%.
DISPOSITION:
Dispose of IAW local SOP
MANAGEMENT APPLICATIONS:
This report shows the reportable systems by Admin
Number that do not meet the Department of the Army overall
FMC readiness goals.
If a reportable system has a FMC rate that is 90% or below,
it will be displayed or printed on this report.
-
Identifies part required if reason for NMC status is supply.
ARMY MATERIEL STATUS SYSTEM
(AMSS)
EQUIPMENT EXCEPTION REPORT
REPORT PERIOD:
19970716 - 19970815
DATE RANGE:
19970716 - 19970815
REPORT DATE/TIME:
19970815 - 09:33:07
UIC:
UNIT NAME & LOCATION:
W33U1C
D TROOP, 6TH CBAC
FT HOOD TX 76544
ADMIN
--- ORG ----- SPT --NOUN
NO. FMC%NMCS%
NMCM%NMCS%
NMCM%
NMCD%
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------TANK CBT
D41 64.6
35.4
SUBSYSTEM/END ITEM FAILURE DATA - HRS/DAYS
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ADMIN
-- ORG --- SPT -NO.
NMCS
NMCM
NMCS
NMCM
NMCD
NMCE
NIIN PNO
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------D41
11
NO PARTS ON ORDER
D41S2
NO PARTS ON ORDER
NMCE%
NOMEN
Projected Fully Mission
Capable Rates By
Reportable End
Item/System
SOURCE:
Display/Print
FREQUENCY:
Materiel
PURPOSE:
Provides information to determine what
equipment could possibly meet the DA
90% based on current FMC/NMC
status.
Dispose of IAW local SOP.
goal of
equipment
DISPOSITION:
Readiness
Processes,
AMSS Reports.
Review daily or IAW local SOP.
MANAGEMENT APPLICATIONS:
This report displays the projected FMC percent and the
NMC hours/days to the DA goal of 90%.
The projections are based on the current NMC status of the
equipment and the concept that "if nothing changes between
now and the end of the report period", this is what the result will
be.
A negative number in the last column indicates number of
days short of goal.
ARMY MATERIEL STATUS SYSTEM
(AMSS)
PROJECTED FULLY MISSION CAPABLE RATES BY REPORTABLE END ITEM/SYSTEM
REPORT PERIOD:
19970716 - 19970815
DATE RANGE:
19970716 - 19970815
REPORT DATE/TIME:
19970815 - 09:33:07
UIC:
W33U1C
UNIT NAME & LOCATION: D TROOP, 6TH CBAC
FT HOOD TX 76544
NOMENCLATURE
EIC
MODEL
WPN
EIC
AUTH
O/H POSS
DAYS
PROJECTED
AVAIL
DAYS
PROJECTED ACCRUED PROJECTED NMC DAYS
NMC
NMC
FMC
TO
DAYS
DAYS
PERCENT
DA GOAL
QUANTITY ON HAND IS ZERO FOR EIC
TRK UTL ARMT CARR
BBG
M1026WW
2
2
62
48
1
13
77.4
-7
TRK UTIL .75T
BEB
M1009
1
1
31
31
0
0
100
0
TRK CGO 2.5T 6X6 WE
BMA
M35A2
1
1
31
22
0
9
71.0
-5
Rollup By
System/Subsystem
Admin Number
SOURCE:
Materiel Readiness Processes,
Display/Print AMSS Reports.
FREQUENCY:
Review daily or IAW local SOP.
PURPOSE:
Identifies equipment usage and
readiness by system/subsystem to
for the report period.
Dispose of IAW local SOP.
date
DISPOSITION:
MANAGEMENT APPLICATIONS:
This report provides the total Fully Mission Capable and Non-Mission
Capable time accumulated for a reportable system or subsystem by Admin
Number.
The data portrayed includes nomenclature, model, quantity authorized,
quantity on-hand, accumulated FMC and NMC time total by level and expressed
in hours or days, type usage, usage totals and current FMC status.
ARMY MATERIAL STATUS SYSTEM
(AMSS)
ROLLUP BY SYSTEM/SUBSYSTEM ADMIN NUMBER (UNIT)
REPORT PERIOD:
19970716 - 19970815
DATE RANGE:
19970716 - 19970815
REPORT DATE/TIME:
19970815 - 09:34:03
UNIT NAME & LOCATION:
D TROOP, 6TH CBAC
FT HOOD, TX 76554
SYSTEM/
SUBSYSTEM
POSS
AVAIL
NMCS NMCM NMCS NMCM NMCD NMCE TYPE
FMC
ADMIN #
MODEL
SERIAL NUMBER HRS/DAYS HRS/DAYS ORG ORG
SPT
SPT
USAGE Y/N
USAGE
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------D1
M1026WW 019859
31
18
8
5
----------------M
N
USAGE
D10
M3
N
3AC52020
31
16
15
-----
-----
-----
-----
-----
M
007957
D11
M3
Y
3AC53030
31
31
-----
-----
-----
-----
-----
-----
M
017000
D11C
ANVRC64 RT0853
Y
31
31
-----
----
-----
-----
-----
-----
D12
M3
N
31
15
-----
-----
-----
16
-----
-----
3AC54242
Y/N
026154
000000
M
005993
DA Form 2715 Summary
Report
SOURCE:
FREQUENCY:
PURPOSE:
items and
(R) Level Range.
DISPOSITION:
Materiel Status Processes, DA Form 2715
Feeder Reports.
Review weekly.
Provides the FMC data by percentage for
on-hand
equipment, pacing
cumulative FMC Readiness
Dispose IAW local SOP.
MANAGEMENT APPLICATIONS:
Run anytime time during report period.
Use to determine R-Rating.
R-Rating is based on the date/range run and is
not projected.
ARMY MATERIEL STATUS SYSTEM
(AMSS)
BATTALION
AMSS FEEDER DATA TO DA FORM 2715
ALL REPORTABLE ITEMS, IN-LIEU-OF, SUBSTITUTES,
AND EXEMPT ITEMS THAT ARE MEASURED IN DAYS
REPORT PERIOD:
19970716 - 19970815
DATE RANGE:
REPORT DATE/TIME:
19970716 - 19970815
1
UIC:
19970805 - 09:34:49
W33UAA
UNIT NAME & LOCATION:
D TROOP, 6TH CBAC
FT HOOD, TX 76554
______________________________________________________________________________________________________________________________________
PERCENTAGE OF ON HAND EQUIPMENT MISSION CAPABLE (PERRY) = 85
PERCENTAGE OF PACING ITEMS ON HAND MISSION CAPABLE (PIEMC) = 39
AGGREGATE FMC R LEVEL RANGE IN PERCENT = 70 - 89
DA Form 2715 Feeder
Reports Detail Report
(LIN Sequence)
SOURCE:
Form
FREQUENCY:
Materiel
Status Processes; DA
2715 Feeder Reports.
Review Weekly.
PURPOSE:
Provides DA Form 2715 Feeder
data at
any time during report period
for
reportable
systems/subsystems and end
items.
DISPOSITION: Dispose IAW local SOP.
MANAGEMENT APPLICATIONS:
Use to identify systemic maintenance issues for
specific types of equipment.
Use to prepare End of Reporting Period USR
Data.
ARMY MATERIEL STATUS SYSTEM
(AMSS)
BATTALION
AMSS FEEDER DATA TO DA FORM 2715
ALL REPORTABLE ITEMS, PACING ITEMS,
IN-LIEU-OF, SUBSTITUTES, AND EXEMPT ITEMS
IN LIN SEQUENCE
REPORT PERIOD:
19970716 - 19970815
DATE RANGE: 19970716 - 19970815
REPORT DATE/TIME:
UIC:
19970815 - 09:35:16
W33UIC
UNIT NAME & LOCATION:
D TROOP, 6TH CBAC
FT HOOD, TX 76554
AUTH
SEQ
LIN
LIN
LIN
NUMBER
NUMBER
NUMBER
ERC
NAME
O/H
FMC%
NMCS%
NMCM%
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------1
C18234
A
CARRIER PERSONNEL
1
32
68
0
R LEVEL
RANGE%
BELOW 59
2
C76335
P
FIGHTING VEH CAV
15
67
11
22
60 - 69
3
D10741
A
CARRIER, MTR, SP
1
100
0
0
90 - 100
4
J43918
B
GEN ST GAS ENG 1.5KW
1
100
0
0
90 - 100
AMSS Authorization
Report
SOURCE:
Option
FREQUENCY:
Update
AMSS
Authorizations
PURPOSE:
the
DISPOSITION:
Provides a listing of all records in
AMSS Authorization File by UIC.
Dispose IAW Local SOP.
Run Monthly
MANAGEMENT APPLICATIONS:
Use to verify unit MTOE authorizations.
Validate authorizations with EDF.
ARMY MATERIEL STATUS SYSTEM
(AMSS)
AUTHORIZATION REPORT
REPORT DATE
UIC:
19970815
W33U1C
UNIT NAME/LOCATION:
D TROOP, 6TH CBAC
FT HOOD TX 76544
WPN
EIC
MODEL
QUANTITY
QUANTITY
QUANTITY
QUANTITY
EIC
AUTHORIZED
REQUIRED
ON-HAND
SHORT
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------BBG
M1026WW
2
2
2
0
BEB
M1009
1
1
1
0
BMA
M35A2
1
1
1
0
BMB
M35A2WW
1
1
1
0
BRT
M925WW
1
1
1
0
BRY
M923
2
2
2
0
BTF
M936WW
1
1
1
0
CEC
M105A2
1
1
1
0
VGJ
MEP015A
2
2
2
0
VHA
MEP025A
1
1
1
0
VHB
MEP026A
1
1
1
0
AAB
4BB
M2
4
4
4
0
AAB
4BD
M240
8
8
8
0
QUESTIONS?