Transcript Connect with Audio Bridge (Host) When creating the NEW meeting:  Make sure the correct audio setting is selected and Audio Profile is.

Connect with Audio Bridge (Host)
When creating the NEW meeting:
 Make sure the correct audio setting
is selected and Audio Profile is setup.
Choose the middle
option and select the
correct audio profile*
Do NOT touch these fields if you want both phone & computer sound.
Before the meeting starts:
1. Call into the Conference via phone,
using the Leader code.
2. Setup the Audio Bridge:
a. Enter the room
b. Choose the Audio, Connect My
Audio.
c. Choose all 4 boxes if you want
participants to talk and be heard.
d. Share the slide showing them
how to connect to the Audio
Bridge.
3. Connect your headset
a. Use directions in Shared slide to
connect your pc, Using
Computer.
CHECK THIS BOX!
If you want all members
to be able to speak.
Make sure all 3 are checked!
In order for members on the
phone and computer to hear
each other.
Welcome To the Room!
Connect to the Audio Bridge so you can hear and be heard.
Step 1:
Step 1: On phone icon, Connect My Audio.
Step 2: Choose how you want to hear:
To hear using your headset or computer speakers:
To hear using your phone:
OR
Step 3: Click Join. You will see a popup asking for
access to your microphone. Choose Allow.
Still Can’t
Hear?
Run through
the Audio
Setup Wizard
found under
Meetings at
the top left of
the room.
If all else fails:
Close the room and
come back in again.
Chances are your
headphones/mic, are
not being recognized.
Refresh your session
by re-entering the
room.