Transcript VGA Input Cable Connect to the VGA jack on the back of the laptop Connect to VGA Input 1 on the back of the.

VGA Input Cable
Connect to the VGA jack on the
back of the laptop
Connect to VGA Input 1 on the
back of the projector
Notebook AC Adapter
Connect It to the back right corner of the laptop
Power Cable For The Projector
Plug the Male end into the power outlet on the wall.
Plug the Female end into the bottom of the projector.
(Optional)
If you plan to use
your remote as a
mouse
Move the switch to the
mouse position
USB Cable
Connect the Wide End to the laptop and the Square End to the black box.
Configuring Your Equipment Guide
• Connect all the necessary cables to the projector and laptop.
• Power on the projector and laptop.
• If you get a Display on the projector and the laptop, you have completed
the steps correctly.
• If not follow these simple steps:
• There is key labeled Fn in blue type. It is the second key over from the
bottom left side of your laptop keypad. Hold it down and simultaneously
press the F8 Key. This toggles through the three different view modes.
(laptop only, laptop and projector, and projector only) select Laptop and
Projector.
F8 Key
Fn Key
If you still do not get a display, press the Input Button on the projector or
remote so that Input 2 is selected.
(Optional)
If You want another Video Source to Display on the projector.