Transcript Now zoning capable! C O M M U N I C A T I N G X Wi-Fi® Remote Access NOW AVAILABLE! S Y S T E M X X X X X X X o.

Now
zoning
capable!
C O M M U N I C A T I N G
X
Wi-Fi® Remote
Access NOW
AVAILABLE!
S Y S T E M
X
X
X
X
X
X
X
o oXo oXo oX
oo
PLAYBOOK
How to win with the new Observer®
communicating system
C O M M U N I C A T I N G
S Y S T E M
This playbook is a quick-reference guide to help you call the right play to give your customers a big home comfort win with most
applications of the Observer® communicating system.This playbook gives you easy access to four types of information.
FIRST, NEW WI-FI®1 PLAYS.This quick-start guide gives you two options for connecting the Observer wall control’s Wi-Fi
system to a homeowner’s Internet connection.This new feature will enable homeowners to access their home comfort
systems from certain smart phones, tablets or computers2.
• PLAY #W-1: SCREEN PASS – Pass control of the Observer system directly through the homeowner’s wireless
LAN/router and internet connection.
• PLAY #W-2: HAND OFF – If a homeowner has Internet access but no existing Wi-Fi network or a wireless network that is
not compatible with the Observer communicating wall control, an Observer wireless access point can hand off system
control to the homeowner’s Internet connection.
SECOND, THE BASIC PLAYS. Nine options for setting up a communicating system with the Observer wall control.
• PLAY #1: TWO-MINUTE DRILL – Set up a communicating furnace/fan coil with a two-stage communicating
outdoor unit.
• PLAY #2: STRAIGHT UPTHE MIDDLE – Set up a communicating furnace/fan coil with a single-stage
communicating outdoor unit.
1Wi-Fi is a registered trademark of Wi-Fi Alliance Corporation.
2When the Observer wall control is connected to the Internet through a Wi-Fi network.
2
C O M M U N I C A T I N G
S Y S T E M
•
PLAY #3: HALFBACK PASS – Communicating furnace/fan coil and non-communicating single-stage AC.
•
PLAY #4: HALFBACK DB OPTION – Communicating furnace/fan coil with non-communicating
two-stage AC.
•
PLAY #5: FULLBACK DB SWEEP – Non-communicating furnace/fan coil with non-communicating AC
or HP.
•
PLAY #6: OUTSIDE OPTION PACKAGE – Non-communicating small package products (SPP).
•
PLAY #7: HITCH ‘N GO – How to set up the outdoor temperature display with a communicating AC or HP.
•
PLAY #8: END RUN – How to set up the outdoor temperature display with a non-communicating
outdoor unit.
•
PLAY #9: TWO-POINT CONVERSION – How to set up Remote Room Sensors with any system.
THIRD, DETAILS. Once you’ve called the play, you can check the Observer communicating system
playbook to see example wiring diagrams to help you execute the play to perfection.
FOURTH, ZONING. Use these four plays to make setup of a zoned system simple.
• PLAY #Z-1: ZONE READ – How to use the Observer wall control with room sensors only.
• PLAY #Z-2: ZONE BLITZ – How to use Observer wall controls as remote room sensors.
• PLAY #Z-3: COVER 6 – How to use a combination of wall controls and room sensors.
• PLAY #Z-4: DB ZONE – How to use wall controls and room sensors with a daughter board.
3
PLAY #W-1: SCREEN PASS
Observer wall control connects directly to the homeowner’s
wireless router.
NOTES:
• Wall control sends wireless signal directly to the homeowner’s LAN/wireless router.
• Homeowner’s LAN/wireless router accesses MyObserverComfort.com via the
homeowner’s Internet connection.
• Homeowner accesses the system remotely through a secure web portal on
MyObserverComfort.com.
Cable/Wire to
Internet
Service
Provider (ISP)
TSTAT0201CW
MyObserverComfort.com via
homeowner’s internet
connection
Homeowner’s
LAN/Wireless Router
INTERNET,
CLOUD
IN THE HOME
4
Homeowner’s
Smartphone
MOBILE
DEVICES
PLAY W-2: HAND OFF
Observer wall control connects to the homeowner’s Internet
connection through a dedicated Observer wireless access point.
NOTES:
• Wall control sends wireless signal to the Observer wireless access point.
• Wireless access point NAXA00101WA hands off the signal to the homeowner’s LAN/wireless router.
• Homeowner’s LAN/wireless router accesses MyObserverComfort.com via the homeowner’s
Internet connection.
• Homeowner accesses the system remotely through a secure web portal on
MyObserverComfort.com.
Observer Dedicated
Wireless Access Point
TSTAT0201CW
IN THE HOME
Ethernet
Cable
INTERNET,
CLOUD
Cable/Wire to
Internet
Service
Provider (ISP)
Homeowner’s
LAN/Wireless Router
5
MyObserverComfort.com via
homeowner’s internet
connection
MOBILE
DEVICES
Homeowner’s
Smartphone
PLAY #1: TWO-MINUTE DRILL
Indoor: Communicating Furnace or Fan Coil Outdoor:
Communicating Two-Stage AC or HP
Wi-Fi
capability
NOW
AVAILABLE!
NOTES:
•
•
•
•
•
4 wires from wall control to indoor, ONLY 2 WIRES FROM INDOOR TO OUTDOOR!*
TSTAT0201CW self-configures the system upon initial startup.*
Outdoor unit includes OD Temp Sensor, communicates back to stat across the 2 wires.*
Communication between each system component.*
Wi-fi capability NOW AVAILABLE!
Standard thermostats, even new Wi-Fi models, can’t do this3!
*
TSTAT0201CW
Furnace or Fan Coil with
Observer™ Communicating
System
Two-Stage AC/HP
with Observer
Communicating System
Full Observer system functionality and features are available when a complete Observer Communicating HVAC system is installed, including wall control,
indoor and outdoor units, and zoning system.
3
6
PLAY #2: STRAIGHT UP THE MIDDLE
Indoor: Communicating Furnace or Fan Coil Outdoor:
Communicating Single-Stage AC or HP
Wi-Fi
capability
NOW
AVAILABLE!
NOTES:
• 4 wires between each system component.*
• TSTAT0201CW self-configures the system upon initial startup.*
• Outdoor unit includes OD Temp Sensor, communicates back to stat across the 4
wires.*
• Communication between each system component.*
• Wi-fi capability NOW AVAILABLE!
Standard thermostats, even new Wi-Fi models, can’t do this!
*
TSTAT0201CW
Furnace or Fan Coil with
Observer™ Communicating
System
7
Single-Stage AC/HP with
Observer Communicating
System
PLAY #3: HALFBACK PASS
Indoor: Communicating Furnace or Fan Coil Outdoor: NonCommunicating Single-Stage AC
NOTES:
• TSTAT0201CW communicates and self-configures with furnace/fan coil only.*
• No communication or self configuration with outdoor unit.
• Furnace board will drive AC across 2 wires: Y and C (call for cooling and
common).
• Outdoor temperature sensor, if required, purchased as separate accessory,
and connected to furnace or fan coil.
TSTAT0201CW
Standard thermostats can’t
do this!
*
Furnace or Fan Coil with
Observer Communicating
System
8
Non-Communicating
Single-Stage AC
Wi-Fi
capability
NOW
AVAILABLE!
Wi-Fi
capability
NOW
AVAILABLE!
PLAY #4: HALFBACK DB
OPTION
Indoor: Communicating Furnace or Fan Coil
Outdoor: Non-CommunicatingTwo-StageAC or any HP
NOTES:
•
•
•
•
•
•
NAXA00101DB is existing“Daughter Board”.
Daughter Board“converts”4-wire communicating control to conventional multi-wire control.*
Daughter Board mounts indoors, inside furnace/fan coil or wherever convenient.
TSTAT0201CW communicates and self-configures with furnace/fan coil only.*
No communication or self configuration with outdoor unit.
Outdoor temperature sensor, if required, purchased as separate accessory, and connected to
furnace or fan coil.
NAXA00101DB
TSTAT0201CW
Furnace or Fan Coil with
Observer Communicating
System
Standard thermostats can’t do this!
*
9
Non-Communicating TwoStageAC or Any Heat
Pump
PLAY #5: FULLBACK DB
SWEEP
Indoor: Non-Communicating Furnace or Fan Coil Outdoor: NonCommunicating AC or HP
Wi-Fi
capability
NOW
AVAILABLE!
NOTES:
•
•
•
•
NAXA00101DB is existing“Daughter Board”.
Daughter Board“converts”4-wire communicating control to conventional multi-wire control.*
Daughter Board mounts indoors, inside furnace/fan coil or wherever convenient.
No communication or self configuration with indoor or
outdoor unit.
• Outdoor temperature sensor, if required, purchased as separate
accessory, and connected to Daughter Board.
TSTAT0201CW
NonCommunicating
Furnace or Fan Coil
NAXA00101DB
NonCommunicating
AC/HP
Standard thermostats can’t
do this!
*
10
PLAY #6: OUTSIDE DB
OPTION PACKAGE
Indoor/Outdoor: Non-Communicating SPP
Wi-Fi
capability
NOW
AVAILABLE!
NOTES:
• NAXA00101DB is existing“Daughter Board”.
• Daughter Board “converts” 4-wire communicating control to conventional multiwire control.*
• Daughter Board mounts indoors, not designed for outdoor use.
• No communication or self configuration with SPP.
• Outdoor temperature sensor, if required, purchased as separate
accessory, and connected to Daughter Board.
TSTAT0201CW
NAXA00101DB
Standard thermostats can’t do this!
*
11
Non-Communicating SPP
Wi-Fi
capability
NOW
AVAILABLE!
PLAY #7: HITCH ‘N GO
Outdoor Temperature Display
Communicating AC or HP
NOTES:
• OD Temp Sensor is factory installed on the outdoor unit control
board.
• OD temp communicated back to stat across the 4 wires (only 2 wires
from indoor to outdoor
with 2-stage condensers).*
Factory
Installed
OD Temp
Sensor
85°
Outside
(only 2 wires with 2stage condensers)
TSTAT0201CW
AC/HP with Observer
Communicating System
Standard thermostats can’t do this!
*
12
PLAY #8: END RUN
Outdoor Temperature Display
Non-Communicating AC, HP, or SPP
Wi-Fi
capability
NOW
AVAILABLE!
NOTES:
•
•
•
•
OD Temp Sensor NOT included with TSTAT0201CW wall control.
OD Temp Sensor accessory TSTATXXSEN01B mounts outside.
Dedicated terminals on NAXA00101DB receive OD Temp Sensor signal.
NAXA00101DB relays OD temp to stat across the 4 wires.*
Non-Communicating
AC/HP
TSTAT0201CW
NAXA00101DB
OD Temp Sensor
TSTATXXSEN01B
13
PLAY #9: TWO-POINT CONVERSION
Remote Room Sensor
Independent from Type of Equipment
Wi-Fi
capability
NOW
AVAILABLE!
NOTES:
• Remote Room Sensor accessory SYSTXIIRRS01.
• Remote Room Sensor is optional—not required.
• Dedicated terminals on TSTAT0201CW receive Remote Room Sensor
signal.
• Choose to sense only remote, only onboard, or average
temperatures from both remote and onboard.
Remote
Room
Remote Room
Sensor
SYSTXIIRRS01
TSTAT0201CW
14
PLAY #1: TWO-MINUTE DRILL/DETAILS
Example Wiring Diagram
Communicating Furnace and Two-Stage AC/HP
Indoor
Unit
Green
Yellow
White
Communicating
Two-Stage AC
or HP
A
DX+
B
DX-
C
Red
D
TSTAT0201CW
S1
DX+
S
R
C
DX-
Wall Control
2
NOTES:
• Upon power-up, TSTAT0201CW wall control will seek and
find attached equipment.
• S1 and S2 are remote room temperature sensor terminals.
15
PLAY #2: STRAIGHT UP THE MIDDLE/DETAILS
Example Wiring Diagram
Communicating Furnace and Single-Stage AC/HP
Indoor
Unit
Green
Yellow
White
Communicating
Single-Stage
AC or HP
A
DX+
B
DX-
C
C
D
R
Red
TSTAT0201CW
S1
S2
DX+
R
C
DX-
Wall Control
NOTES:
• Upon power-up, TSTAT0201CW wall control will seek and
find attached equipment.
• S1 and S2 are remote room temperature sensor terminals.
16
PLAY #3: HALFBACK PASS/DETAILS FOR AC
Example Wiring Diagram
Communicating Furnace
Non-Communicating Single-Stage AC
NOTES:
• Upon power-up, TSTAT0201CW wall
control will seek and
find indoor equipment.
• Wall control will prompt for
outdoor equipment definition.
Indoor Unit
Green
Yellow
White
• OAT is accessory TSTATXXSEN01B
Outdoor Air Temperature sensor.
Red
A
B
C
D
1-Stage AC
TSTAT0201CW
S1
S2
DX+
R
Wall Control
C
COM
C
Y/Y2
Y
DX-
OAT
17
OAT
Sensor
PLAY #3: HALFBACK PASS/DETAILS FOR HP
Example Wiring Diagram
Communicating Fan Coil
Non-Communicating Single-Stage HP
NOTES:
• Upon power-up, TSTAT0201CW wall
control will seek and find indoor
equipment.
• Wall control will prompt for
outdoor equipment definition.
Fan Coil
Green
Yellow
White
Red
• OAT is accessory TSTATXXSEN01B
Outdoor Air Temperature sensor.
TSTAT0201CW
S1
S2
A
B
C
D
C
DX+
R
C
DX-
1-Stage HP
C
R
R
O
O
W
W2
Y
Y
Wall Control
OAT
18
OAT
Sensor
PLAY #4: HALFBACK DB
OPTION/DETAILS
Example Wiring Diagram
Communicating Fan Coil
Non-Communicating Two-Stage AC/HP
NOTES:
Fan Coil
Green
• Upon power-up,
TSTAT0201CW wall control
will seek and find indoor
equipment.
• Wall control will prompt for
outdoor equipment
definition.
• NAXA00101DB is
accessory Daughter
Board.
• OAT is accessory
TSTATXXSEN01B
Outdoor Air
Temperature sensor.
Yellow
White
Red
NAXA00101DB
A
DX+
B
DX-
C
C
D
R
C
S1
S
2
DX+
R
C
DX-
Wall Control
TSTAT0201CW
OAT
Sensor
19
OAT
2-Stage
AC or HP
C
R
R
Y2
Y2
W2
W2
Y
Y
G
G
W
W1
O
O
PLAY #5: FULLBACK DB
SWEEP/DETAILS
Example Wiring Diagram
Non-Communicating Furnace or Fan Coil
Non-Communicating AC/HP
Wall
Control
DX+
TSTAT0201CW
R
C
NAXA00101DB
Green
Red
White
DX+
R
C
Yellow
NOTES:
DX-
• Upon power-up, TSTAT0201CW wall
control will prompt for both indoor and
outdoor equipment definition.
C
R
• NAXA00101DB is accessory
Daughter Board.
C
C
R
Y2
Y2
W2
W2
Y
Y
G
G
G
W1
W
W1
O
O
Y/Y2
NonCommunicating
Indoor
OAT
20
NonCommunicating
Outdoor
R
W2
• OAT is accessory TSTATXXSEN01B
Outdoor Air Temperature sensor.
DX-
OAT
Sensor
PLAY #6: OUTSIDE OPTION PACKAGE/DETAILS
Example Wiring Diagram NonCommunicating SPP
Wall
Control
TSTAT0201CW
DX+
R
C
NOTES:
DX-
• Upon power-up, TSTAT0201CW wall
control will prompt for both indoor and
outdoor equipment definition.
• NAXA00101DB is accessory
Daughter Board.
• OAT is accessory TSTATXXSEN01B
Outdoor Air Temperature sensor.
NAXA00101DB
Green
Red
White
Yellow
DX+
R
C
DX-
SPP
C
R
R
Y2
Y2
W2
W2
Y
Y
G
G
W
W1
O
O
OAT
21
C
OAT
Sensor
NOTES:
PLAY Z-1: ZONE READ
Observer wall control with
room sensors only.
•
Wall control established zone 1 and provides setpoints for all other zones.
•
Remote Room Sensors monitor temperature for zones 2
– 6 (no adjustments).
Also required:
• LAT (Leaving Air Temp Sensor)
• Barometric Relief Damper
• Field-supplied, dedicated 75VA damper transformer.
*separate field-supplied 60VA- 75VA communication bus
transformer, when CTS zone sensors are used.
*When the Bus Transformer is used, DO NOT connect
the R and C power wires from the zoning panel to the
indoor unit.
•
Zone 2
Zone 3
Zone 4
•
Zone 1
Communication Bus
Transformer*
Zoning Panel
Damper
Transformer
TSTAT0201CW
Communicating
Furnace or Fan Coil
Communicating AC
or HP
Dampers
Up to 3 per zone
Zone 1
Zone 2
Zone 3
Zone 4
22
PLAY Z-2: ZONE BLITZ
Observer wall controls used as
remote room sensors.
Zone 2
Zone 3
TSTAT0201CW
TSTAT0201CW
NOTES:
•
•
•
Observer wall controls are used at all zone
locations.
From each wall control, set points can be adjusted
up or down for any of the zones.There’s no need to go back to
zone 1 to make adjustments for other zones in the house.
Also required:
• LAT (LeavingAir Temp Sensor
• Barometric Relief Damper
• Field-supplied, dedicated damper 75VA transformer; separate
field-supplied 60VA-75VA communication bus transformer, when
CTS zone sensors are used.
Zone 1
Zoning Panel
Communication Bus
Transformer
Damper
Transformer
TSTAT0201CW
Communicating
Furnace or Fan Coil
Dampers
Up to 3 per zone
Zone 1
Zone 2
Zone 3
23
Communicating AC
or HP
PLAY Z-3:
NOTES:
COVER 6
•
•
Observer wall controls in
combination room sensors.
Zone 2
Zone 3
•
•
Zone 4
•
TSTAT0201CW
Wall control establishes zone 1.
Any mix of wall controls and remote room sensors used at
zones 2 - 6.
From each wall control, set points can be adjusted up or down
for any of the zones. There’s no need to go back to zone 1 to
make adjustments for other zones in the house.
Remote Room Sensors monitor temperatures only (no
adjustments).
Also required:
• LAT (Leaving Air Temp Sensor)
• Barometric Relief Damper
• Field-supplied, dedicated 75VA damper transformer;
separate field-supplied 60VA- 75VA communication bus
transformer, when CTS zone sensors are used.
Zone 1
Zoning Panel
Communication Bus
Transformer
Damper
Transformer
TSTAT0201CW
Communicating
Furnace or Fan Coil
Communicating AC
or HP
Dampers
Up to 3 per zone
Zone 1
Zone 2
Zone 3
Zone 4
24
PLAY Z-4: DB
NOTES:
ZONE
•
Observer wall controls with
Daughter Board and noncommunicating equipment.
Zone 2
Zone 3
•
Zone 4
TSTAT0201CW
Zone 1
Zoning Panel
•
Communication Bus
Transformer*
Damper
Transformer
TSTAT0201CW
Install Daughter Board between Zoning Panel and
equipment to allow any conventional non-communicating
equipment to be used with Observer wall controls and
room sensors.
Also required:
• LAT (Leaving Air Temp Sensor)
• Barometric Relief Damper
• Field-supplied, dedicated 75VA damper transformer;
*separate field-supplied
60VA-75VA communication bus transformer, when CTS
zone sensors are used.
*When the Bus Transformer is used, DO NOT connect
the R and C power wires from the zoning panel to the
daughter board.
NAXA00101DB
Daughter Board
NONCommunicating
Furnace or Fan Coil
NONCommunicating AC
or HP
Dampers
Up to 3 per zone
Zone 1
Zone 2
Zone 3
Zone 4
25
How to Win with a Complete Observer® Communicating System:
1. Requires just 4 wires between system components (only 2 wires from indoor to
outdoor with 2-stage condensers).*
2. TSTAT0201SCW self-configures the system upon initial startup.*
3. Outdoor unit includes OD Temp Sensor that communicates to stat across the 4-wire
connection (2-wire connection from indoor to outdoor for 2-stage condensers).*
4. Text based diagnostic messages.*
5. Constant fan speed options – low, medium & high.
6. Expanded dehumidification capability.
7. Onboard equipment options configurable from the wall control
(Example: Quiet Shift Heat Pump).*
8. Communication among all system components.
9. Easier zoning set-up.
10.
NEW! Wi-Fi Capability NOW AVAILABLE!*
*Standard thermostats, even new Wi-Fi models, can’t do this!
C O M M U N I C A T I N G
S Y S T E M
© 2015 International Comfort Products
Part No. 401-06-0500-03 Printed 12/14