DN DRUM & TOTE FILLERS

• Models are available for filling containers from 50 to 210 liters (15 to 55 gal.). The DN1-PL-ID models are capable of filling drums on a pallet or totes.

• Electronic weighing provides accuracy to better then +/-0.1% of target fills. This will satisfy the customer and reduce product loss during filling.

• DN models are available with brass and steel, 316 stainless steel, sanitary stainless steel and titanium contact parts to meet the requirements of most liquid and semi-liquid products.

• Sub-Surface models are available for filling foaming products.

• The DN models may be provided with a variety of different nozzles to meet special product characteristics or special product requirements.

DN1-PL-ID DN1-DR-ID

• The machines may be provided with explosion proof electrics for use in hazardous locations.

• The DN fillers are designed for easy cleaning and maintenance, and it includes visual and tactile indicators and manual over rides for easy servicing.

• The machines are capable of filling different sizes of containers and they are easily adjusted to different containers and sizes.

• All machines may be modified and adapted to meet specific customer requirements.

Estimated Filling Speeds (Containers/Hour)

Container Size Model DN1-DR-ID DN1-DR-ID/S# DN1-PL-ID DN1-PL-ID/S# 20 liter/ 5 gal.

* * 50 liter/ 16 gal.

120 100 205 liter/ 55 gal.

60 60 55 55

Filling speeds are based on the filling of water into open top containers from a gravity tank 3 m(10 ft.) above the filling nozzle..

# Sub-Surface fillers.