Slide 1

Rajiv Gandhi Rural Housing
Corporation Limited
User Manual
GPS based Physical Progress Report Updation


Slide 2

Concept and Purpose
• To capture unique GPS Co-ordinates of the
area.
• To avoid duplications.

• To maintain transparency.
• “Fund Releases” based on GPS based Physical
Progress Updation.


Slide 3

HARDWARE USED FOR CAPTURING PHOTO AND GPS CO-ORDINATES

Micro SD Card 8 GB

Samsung Galaxy-Y GT-S5360


Slide 4

How to install Application and Database software
to the Mobile phone
1. Download “GPS Mobile Software” from:
• http://ashraya.kar.nic.in
• Download Menu.
• Download Sub Menu.
• Click GPS Mobile Software to download.
2. Save the file on desktop of your local computer.
3. The downloaded file is named as “RGRHCL.zip” a folder by name “RGRHCL” will
be there, containing one folder and one file as shown below:

4. Connect Mobile phone to the computer using Data Cable and copy the above said
RGRHCL folder and RGRHCL.apk file to Micro SD Card 8 GB.
5. Disconnect the mobile phone from the computer and Run / Open RGRHCL.apk
file from Micro SD Card 8 GB, through mobile, which will install the software onto
the mobile.
6. End of the Mobile Software Installation…


Slide 5

How to Download the Physical Progress Data from Online Application
http://ashraya.kar.nic.in/ashrayanew
TNO should login
using Taluk Login ID
and Password

Click on this sub-menu…


Slide 6

Checklist

Download

NOTE:
1. PDO’s can download the GPS Data under GP Login. Only IAY scheme data can be downloaded for PDO’s.
2. TNO’s can download the GPS Data under Taluk Login. Only Basava Housing Scheme and SDP Scheme
data can be downloaded for TNO’s.

Contd…


Slide 7

STEP-1
Input.csv file will be saved on the desktop of the local
computer.

STEP-2
Connect the mobile phone to the computer using data cable,
where Input.csv file is residing. Copy the Input.csv file to
the Micro SD Card  RGRHCL of the mobile
phone.


Slide 8

How to use Mobile Software

Click here to Open the application software…

RGRHCLAp


Slide 9

How to use Mobile Software

Enter Benf. Code and click on
Go button…

By default Yes will be ticked. If
the Site or House not found, tick
No.

Progress

Progress shown, but
GPS not captured.

Status

Once the Photo is
captured, the status
will turn to Captured.

Photo

Click here to capture
the Photo.

These details are displayed
automatically
on
entry
of
Benf.Code and click of Go button
for confirmation.
This displays the GPS Accuracy for
information.

Click to Save the record.

1st Photo to be taken out side the house / site, it should be clearly visible.
2nd Photo to be taken inside the house / site exactly in the Center of four corner, which capture the GPS
co-ordinates.


Slide 10

How to Upload / Transfer data from Mobile phone to the Central Server

STEP-1
Connect the mobile
phone
to
the
computer using data
cable.

STEP-2
Press the finger on
this area and drag
towards down. And
click
on
USB
Connected

Connect Storage
to PC  OK.

STEP-3

Open Micro SD Card by double
clicking on Removable Disk
drive and copy RGRHCL folder
to ‘C’ Drive of your local
computer.


Slide 11

How to Upload / Transfer data from Mobile phone to the Central Server
STEP-4
Login to Online Application and follow the steps as shown below:

Click on this sub-menu…
STEP-5

Select Database File :

C:\RGRHCL\Database\BenfDetails.db

Data Uploaded successfully…

Browse…


Slide 12

Contact:
Tel(Off): 080-23118888 Ext: 45/ 46/ 47/ 49
Smt. Madhu Kumari
[email protected]

Sri. Subbu Naik
[email protected]

Sri. Prajwal
[email protected]


Slide 13

Thank you!!!