Transcript SONOGRIP ®  ULTRASONIC WELDED WIRES  RADIAL SPRING CLIP  SOLID MOLDED BODY  SPLIT TERMINALS  METAL OR NYLON SLEEVE  ADHESIVE SEALANT.

SONOGRIP
®
 ULTRASONIC WELDED WIRES  RADIAL SPRING CLIP
 SOLID MOLDED BODY
 SPLIT TERMINALS
 METAL OR NYLON SLEEVE
 ADHESIVE SEALANT
Most Common Causes
of “Light-Cord” Failures
• LOOSE PLUG PIN GRIP
• LOOSE WIRE CONNECTIONS
• CORRODED WIRE CONNECTIONS
Screw Type
Connections
Detent Provides Grip
On Receptacle Pin
Conventional Plug Terminal
When New
Screws Can
Loosen
Detent Fatigues,
Losing Grip On
Receptacle Pin
Conventional Plug Terminal
After Use
SONOGRIP
®
Radial Spring Provides Long Life Grip
SONOGRIP Terminal
®
“Clam Shell” Design Provides Full Contact
SONOGRIP Terminal
®
Ultrasonic Welded Terminal Connection
SONO GRIP
®
Terminal
SONO GRIP
®
 Ultrasonic Welding
 No Mechanical Connections
 No Corrosion Between Wire & Terminal
1
2
1
2
SONOGRIP
®
1 Metal or Nylon Sleeve
2 Solid Molded Body
SONOGRIP “XT” Polyurethane Jacket
Meets SAE J2222
• Maintains High Temperature Sag Resistance
• Stays Flexible at Extreme Low Temperature
• Has Excellent Cut & Abrasion Resistance
• Excellent Resistance to UV, Ozone, & Chemicals
SONOGRIP
®
Straight or Angle Styles
Exceed the Requirements of SAE J560
TRAMEC® High Performance
Nylon Receptacles
Angle Plug
Reduces
Cable Stress
Bonded Seal &
Strain Relief
SONOGRIP® Cable