Transcript SmartICII_Presentazione_V1-5_GB
Smart.IC II project
Forklift truck connection, outside of the connector
Field applications
Forklift truck connection Automatic data download through GPRS and anlaysis of working cycles. Data access from:
www.alfaprogetti.com
Forklift truck Smart.IC II GPRS AP882
Smart.IC II system
GPRS communication TELEPHONE company INTERNET SmartView II CUSTOMER Serverweb ALFA PROGETTI
Features
• • • • • • •
Cutting down on maintenance costs
Overall
monitoring
on battery and forklift truck use Automatic signalling if
water topping up
is needed Automatic weekly
email messages
reporting bad uses and
needed actions Customers made more responsible
Problems supported with written evidence in
disputes
with customers and suppliers
Saving thanks to an optimized fleet management
•
Extraordinary maintenance invoicing
possible •
Invoicing
of maintenance required because of
bad use
•
Rating
of suppliers and customers according to their
reliability
• •
Smart.CB
:
Makes battery life longer Allows you to save on charging costs
Power Saving
SMART.IC II + SMART.CB
Charges battery during the cheapest hours Restores only the capacity used by the battery Makes battery life longer
The cheapest hours to charge battery can be programmed
Software: PC and WEB
Data collected by
Smart.IC II
can be displayed with: SmartView II: Personal computer program SmartWeb: web pages accessible from
www.alfaprogetti.com
In addition
SmartService
will send you an
email message
is detected or forklift truck or battery needs checking.
if a failure
Data: Monitor
It is possibile to analyze instantaneous data ONLINE System status Smart.IC II panel Relay status indication Battery level indicator Battery voltage Inside and outside temperature
Data: Diagram
Instantaneous diagrams downloaded by the Smart.IC II connector ONLINE Current diagram Voltage diagram
General information on the stored cycle
Data: Old
Data for searching the Smart.IC II connector Rating Battery state at cycle start Battery state on discharge Date and time of discharge start Battery state while charging Date and time of charge start Battery state at cycle end
Details of the stored cycle Discharge data
Data: Info Old
Charging data
Averages calculated from stored data
Data: Averages
Cycles selection Charging stage: Average capacity at the end of charging Discharge stage: Average capacity at the end of the discharge cycle Discharged average capacity Average capacity not available
Data: Statistics
Statistics collected by the Smart.IC II connector Statistics collected by the Smart.IC II connector Battery statistics: Discharge time Charging time Stop time Statistics collected and faults, if any
Data: Programming
The functioning of Smart.IC II can be customized by using some programming parameters concerning the discharge and charging stage of the traction battery where the connector is installed Rating Discharge parameters Charging parameters WEB parameters
Data: Daily
Monthly report on data concerning the daily working cycles Time selection Daily summary of operating data:
Start and end date
of the cycle
Duty hours
during a day
Downloaded Ah
during a day
Minimum voltage
reached in the last working cycle of the day
Underdischarge time
of the last working cycle of the day
Cycle no. which it refers to
Monthly total
Faults summary
Faults Summary
Battery Faults Charger Faults User Faults
Tabular Data Summary
Data Summary
Weekly check
Example: weekly e-mail report
Example: monthly e-mail report
Monthly summary