Transcript Bild 1 - RIAN BV

a macab power point presentation
CABLE –RIAN – Access System
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Multilet access system MAS-64
•
•
•
•
•
•
•
•
Access switch, CMTS, for up to 64 users.
Extra outlet for every connected user.
Not connected users are not affected
Frequency 5 – 36 MHz for upstream
Frequency 64 – 76 MHz for downstream
Use existing coax installation, no upgrade
to network required.
Build VLAN between users
Range up to 5 km between MAS and MIO
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
MAS 64
•
•
•
•
•
•
•
•
Build in Bridge and Switch/Router with DHCP and
NAT.
Windows XP embedded
Small installation size
10/100 Base-T for the WAN port (RJ-45)
10/100 Base-T for the Management port
(RJ-45)
F-female for RF-connection
Automatic registration and provisioning
Home-network VLAN supported
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Multilet intelligent outlet MIO-04
•
•
•
•
•
•
•
Data interface 10/100 Base-T with RJ45 connector
Plug ´n Play
Easy to install
Management per outlet
Possible to turn of outlet from MAS
Small size
Need powersupply
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Connecting the MAS to the Cable system
OUT
-1dB
TV-Channels from
Head-End
TV + Data
>-30dB
8 dB TAP
2 Mbit
IN
coax
Output level from MAS:
Max 108 dBuV
Min Input level to MAS
from Mio: 63 dBuV
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Attenuation MAS and MIO
Min input to the
MAS is 63 dBuV
Attenuation between
MAS & MIO should
be 25 – 37 dBuV
Max output from
The MIO is 108 dBuV
Min input to the
MIO is 63 dBuV
Max output from the
MAS is 108 dBuV
RIAN BV WAALRE 040-2213656
a macab power point presentation
Use 3 MAS in same coax
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS 1 2
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
STOP FILTER
5-65 MHz
MAS 1
MAS 1
MAS 2
MAS 3
MAS 2
MAS 3
DS 68 MHz US 16 MHz
DS 72 MHz US 20 MHz
DS 76 MHz US 24 MHz
dBuV
Fq
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS 1 2
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Use 3 MAS on same frequency
MAS 1 DS 70 MHz US 20 MHz
MAS 2 DS 70 MHz US 20 MHz
MAS 3 DS 70 MHz US 20 MHz
STOP FILTER
5-65 MHz
STOP FILTER
5-65 MHz
STOP FILTER
5-65 MHz
MAS 3
MAS 1
MAS 2
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Allways use a UPS if possible
•
•
•
Transients and lighting (Thunderstorm)
Protect the equipment
Needs 8 min to restart
220v
RIAN BV WAALRE 040-2213656
220v
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith 1 2 3
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Bandwith of the MAS
Don´t use ch.4 and downstream lower then 70 Mhz
Bandwith of the upstream is 3.8 MHz as default
Bandwith of the downstream is 3,5 MHz as default
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith 1 2 3
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Using a return-amplifier 5 – 35 MHz
Bandwith of the upstream is 3.8 MHz as default
Bandwith of the downstream is 3,5 MHz as default
RIAN BV WAALRE 040-2213656
a macab power point presentation
Using a return-amplifier 5 – 65 MHz
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith 1 2 3
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Problems !
The guardband of
5 – 60/65 MHz return
amplifier will interfear
on the downstream.
Bandwith of the upstream is 3.8 MHz as default
Bandwith of the downstream is 3,5 MHz as default
RIAN BV WAALRE 040-2213656
a macab power point presentation
Passing amplifiers with no return-path
• Passing a amplifier with no return-path.
Diplex filter
Diplex filter
TV
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
DATA
You will loose ~ 1dB in forward and ~ 1dB
in return by using 2 diplex-filter.
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
QoS
With Macab MTR-serie (traffic-shaper) you will be able to:
•
Control the bandwith to each user from 128 Kb/s up to 10 Mbit/s
•
Login- / User authentification System
•
VoIP (priority)
•
Advanced logg-functions
MTR-100,200,300,400
coax
RJ-45
2 Mbit/s from ISP
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Connect the MIO
Use a patch cable to connect
MIO-04
If Multimedia is available
use MM port
Trough loss MIO to TV out
47 till 860MHz < -2dB
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
System loss TV when connecting the MAS
MAS to the system with a 10 dB tap
-1 dB
Passing MIO-04
-2 dB
TOTAL LOSS ON TV-CHANNELS
-3 dB
MIO Max input level 90dBuV, Min input level 63 dBuV
MIO Max Output level 108 dBuV, Min Output level 90dBuV NB: AUTO LEVEL
MAS Max Output level 108 dBuV, Min Output level 70dBuV NB: Manually Adjust
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Transfer Speed
• Download speed (3 Msymb. & QAM64)
• Upload speed (3 Msymb. & QPSK)
• Data rate MAS System Downstream
• Data rate MAS System Upstream
Notice! 8 bit = 1 byte
240 kB/s in downloadspeed
is equal to a Internetspeed
of 2 Mbit/s
RIAN BV WAALRE 040-2213656
7 Mbps
3 Mbps
18* Mbps
6* Mbps
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Data capability, Different symbol rates
Down Stream 64 – 76 MHz
Symbol rate
Bandwidth
QAM16
QAM64
QAM256
1 MS/s
1,15 MHz
4 MB/s
6 MB/s
8 MB/s
1.5 MS/s
1,73 MHz
6 MB/s
9 MB/s
12 MB/s
2 MS/s
2,3 MHz
8 MB/s
12 MB/s
16 MB/s
3 MS/s
3,45 MHz
12 MB/s
18 MB/s
24 MB/s
4 MS/s
4,6 MHz
16 MB/s
24 MB/s
32 MB/s
6 MS/s
6,9 MHz
24 MB/s
36 MB/s
48 MB/s
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Data capability, Different symbol rates
Up Stream 5 – 36 MHz
Symbol rate
Bandwidth
QPSK
O,750 MS/s
0,937 MHz
1,5 Mb/s
1,5 MS/s
1,875 MHz
3 Mb/s
3 MS/s
3,750 MHz
6 Mb/s
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Factory default setup
•
MIO-04 Upstream frequency 5-36MHz (20 MHz)
QPSK, 3MS/s (6MBit), 108dBuV
•
MAS Downstream frequency 64 – 76 MHz (74 MHz)
QAM64, 3MS/s (18Mbit), 108dBuV
•
Bridge setup
•
MIO Plug & Play
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Preparations
•
Measure the forward and return path frequency
response
•
Chose forward and return path that gives the best
performance regarding loss, noise and interference
•
Measure the TV channels levels to check the system
performance before Multilet installation
•
If you need to upgrade the system do this before
Multilet installation
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
System Calculations
•
Keep same level of downstream signal as the TV
channels. Min level to MIO 63 dBuV.
•
Calculate the return attenuation as a normal TV channel.
Max transmission level of MIO is 108 dBuV. Min input
level to MAS is 63 dBuV.
•
Do not FORGET to include a margin.
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Ranager
Manage all IO´s
Set DS & US Frequency
Check link to all IO´s
RIAN BV WAALRE 040-2213656
a macab power point presentation
System
MAS-64
MIO-04
Connection
Attenuation
3 MAS
UPS
Bandwith
Return Amp.
QoS
MIO-04
System loss
Speed
Downstream
Upstream
Default
Preparations
Calculations
Ranager
Config IO
Config IO
Check link to MAS
See the US power
Check firmware
See the US & DS frequency
RIAN BV WAALRE 040-2213656