Transcript Weber State University Department of Radiologic Sciences

Weber State University
Department of
Radiologic Sciences
Computer Orientation
Computer Overview:
• You will need to use a computer to
get through your program. All
examinations are given on computer.
• Computers are available to registered
students here in the Radiologic
Sciences department in our computer
lab. There are computer labs
throughout the university.
•
If you have computer problems
related to WSU (can’t access the
servers, Chi Tester, or the internet
using wireless account) you can
contact the WSU computing support
department for assistance at:
801.626.7777 or
801.626.6000 ext. 7777.
•
Wireless access on campus
–
The College of Health Professions (the
Marriott Health Building) and the
Department of Radiologic Sciences
currently have Wireless Internet
connection available. If you have a
laptop and would like to be able to
access the internet on campus (no fees),
you may do so through the WSU
website.
Two ways to get access:
1. The student can take his/her laptop
to Lampros Hall and go to the Help
Desk on the second floor. There are
technicians there that can help them
register their laptop into the
University system.
•
It can be done online.
1. Go to the WSU home page (www.weber.edu)
2. Current Students
3. Login using your Wildcat ID and password
4. Click on the tab titled Student Services Fall
2005-Spring 2006
5. Under the Miscellaneous box, there is a link
titled Wireless, University Village & other public
access accounts. Click this.
6. Read the legal disclosure and Continue
7. Click on Request Wireless Network Access
8. Input the Ethernet or MAC address* from the
wireless card and the Operating System, and
Create Account.
* To find the Ethernet or MAC address, the user can
go to Start, Run, type CMD, and Enter. At the
DOS prompt, enter ipconfig/all. Locate the
Wireless card (most laptops have a wire and a
wireless entry on this screen), the Physical
Address is there. It's a twelve characters, with
no zeroes or L's (only 0-9, A-F).
• That will put the computer into the
database for access to the system. It can
take 10-15 minutes before the account is
active and ready. Most laptops will require
you to reinitialize the card by restarting or
doing a Repair (release and renew) of the
wireless card. Then simply connect to the
WaveLAN Network (an unsecure
connection).
E-Mail
–
Preferred method of communication for
most faculty and staff.
–
Please allow 24 hours minimum for a
response to e-mail.
–
Put a subject in the subject line.
•
It is recommended that you identify the
program and course you are writing about in
the subject line:
1st year Outreach RADT 1022 – Exam 1
You will find faculty and staff e-mail
address on the:
WSU Main website
Department of Radiologic Sciences
website
RadSci1 Bulletin Board
*** make sure to check you
mail.weber.edu account often, as
your instructors will be utilizing this
e-mail address ONLY to get in
contact with you
Weber State University
Website
Wildcat Account
• All students must register for a
Wildcat Account. Do this as soon
as possible. To do so access
current student under the WSU
homepage and follow the
instructions.
Radiologic Sciences
Home Page
Website
http://weber.edu/radsci
RADIOLOGIC SCIENCES
DEPARTMENT
BULLETIN BOARD
http://weber.edu/radsci1
CHITESTER
WEBSITE
http://chitester.weber.edu
Then …
If you search for all tests, this
will you give you ALL exams that
are listed on Chitester …
DO NOT DO THIS … it will take
forever!!!
Click on exam you wish to take and “continue”
If you experience difficulty while
taken an exam, DO NOT PANIC!
•Simply close your browser.
•Reopen the browser, go to Chi Tester,
sign-in again, go to the list of tests,
and select the exam you were taking
when you got bumped off.
•Chi Tester should give you a message
like: Would you like to resume this
test?
•Be sure to contact your instructor if
you experience problems.