Transcript Avaya 9135 UPS - Extranet Login

Avaya 9130 and 9135 Online UPS
1000 to 6000 VA
Avaya Applications
Advanced power protection for:







S8700/S8500/S8300/S8100 Media
Servers
Unified Communications
applications
GuestWorks® Systems
Other PBX Systems
Voice Mail Systems
Multidesktop Environment
Applications requiring extended
backup time
6000 VA UPS
1000 to 3000 VA UPS
Key Features







Double-conversion
Online Topology
0.9 power factor and >95% efficiency
Greater power density –
6000 VA in only 3U of rack space
Extended Battery Modules (EBMs)
Rail kits included
Multilingual User Interface &
Communication
Standard Web/SNMP Card
Avaya 9130 UPS
1000 to 3000 VA
Avaya 9135 UPS
6000 VA
Complete Power Protection
The Avaya UPS provides double-conversion online power protection from
all 9 of the most common power problems that threaten your equipment
and data.
Power Failure
Power Sag
Power Surge
Undervoltage
Switching
Transient
Overvoltage
Frequency
Variation
Harmonic
Distortion
Line Noise
More real power, high efficiency



High 0.9 output power
provides more real
power for less cost
0.99 input power
factor allows the 9130 UPS to avoid the disturbances
that some energy converters tend to cause
When power conditions are within acceptable limits,
the 9130 UPS can operate in high-efficiency mode of
95 percent or higher
Greater power density
Compact design
leaves plenty of room
for other equipment
such as EBMs or
PPDMs
6000 VA UPS with EBM and PPDM
Space-saving 2U rack height for
1000 to 3000 VA UPS
9130 UPS
9130 EBM
Standard Configurations
6000 VA UPS with EBM and PPDM
UPS
EBM
PPDM
Extended Battery Modules (EBMs)



Add EBMs to extend
backup time
Each EBM occupies only
2U of rack space for 1000
to 3000 VA models and
3U for 6000 VA UPS
Hot-swap capability
allows you to increase
backup time or replace
EBMs while keeping
attached equipment up
and running
PowerPass Distribution Modules (PPDM)
The PPDM is equipped with
a maintenance bypass
switch so that you can
replace the UPS without
shutting down the
connected equipment.
The 6000 VA UPS offers
three different PPDMs for
different output receptacles.
UPS
PPDM
Rack and Tower Form Factor



Rail kits are included with 9130 UPS
The 9135 UPS can be installed as a
tower unit or in a standard 19-inch
rack enclosure
Rail kits (4-post) and tower stands are
included with 9135 UPS
Intuitive Multilingual LCD



Easily navigate the blue
backlit LCD for configuration
and enhanced remote
monitoring capabilities
Immediate notification of
status and alarms with four
additional high-intensity LEDs
Geographically versatile
menus offer multiple languages
The entire display of the 6000 VA
UPS rotates for the best orientation,
whether the UPS is used vertically as
a tower unit or horizontally in a rack.
6000 VA UPS Rear Panel
Communication card slot for Web/SNMP interface
Remote
Power Off
port
EBM RJ-11
Connector
Relay port
RS-232 port
USB port
Ports for setup,
supervision and
additional control
Web/SNMP Card

The Web/SNMP card allows you to
connect your UPS directly to an
Ethernet network and the Internet.
It allows you to monitor and manage
your UPS with a standard web
browser and SNMP, while simultaneously
providing graceful shutdown for multiple
computer systems over the network.

Included with UPS

Different than the card offered with the previous Avaya 9125
UPS
Key improvements
Legacy
New 9130 and 9135
Benefit
Power
density
6 kVA in 5U
6 kVA in 3U
Reduced footprint frees up to 2U
of rack space
Efficiency
85% in normal mode
and 90% in highefficiency mode
91% in normal mode and up
to 98% in high-efficiency
mode
More efficient UPS consumes less
power, dissipates less heat and
reduces cooling costs for dramatic
cost savings and greener IT.
6000 VA
Power
distribution
options
One L6-30 output
Four L6-30 outlets, IEC
options
Support up to four pieces of
equipment with no PDU.
Rail kits
4-post rail kit
available as a
separate option
4-post rail kit included with
UPS
Fewer SKUs to manage and
convenient ordering
Local
information
Status indicators
Four-line, backlit, blue LCD
display provides real-time
load and runtime information
as well as service code and
descriptions
Provides valuable monitoring and
troubleshooting information
without requiring users to log into
a networked monitoring station.
eNotify Remote Monitoring

Real-time enterprise monitoring service that
provides 24/7 monitoring of alarms,
temperature/humidity levels, and battery discharge
data to guard against battery failure