Transcript ภาพนิ่ง 1 - TS Network

monochrome cameras
CCBB1320-MC 1/3” CCD mono camera 400 TV lines, CCIR, 230 VAC
2GF1083-8CA A24205-A336-B677
CCBB1320 is an excellent choice of monochrome camera for general
surveillance applications. Good low-light sensitivity, electronic shutter,
automatic gain control and back-light compensation enable this camera
to operate in a wide range of lighting conditions. Setup is via DIP
switches.
Pixels 500 (H) x 582 (V)
Synchronisation Internal with crystal
External mains synchronisation
Horizontal resolution 400 TV lines
Minimum illumination 0.1 Lux (F1.2, AGC On) at 50 IRE
S/N ratio >50 dB
Gain control Selectable: On (25 dB) or Off
Electronic shutter Automatic between 1/50 s and
1/100,000 s
Back-light compensation Selectable: On or Off
Lens mount CS (C-mount adapter supplied)
Auto-iris control Direct drive or Video drive
Dimensions (W x H x D) 70 x 58 x 117 mm
Power requirements 100 ~ 240 VAC, 2.8 W
CCBB1320-LC 1/3” CCD mono camera 400 TV lines, CCIR, 12 VDC / 24 VAC
2GF1083-8AA A24205-A336-B677
As above for technical details but 12 VDC or 24 VAC, 2.8 W supply.
CCBB1315 1/3” DSP mono camera 570 TV lines, CCIR, 12 VDC / 24 VAC
2GF1081-8DA A24205-A336-B770
The CCBB1315 is characterised by a new type of design and a comprehensive
range of functions. There is a 4x digital zoom, which can
be selected locally on the camera or remotely via the integral remote
control interface (TTL, RS485). In addition, remote parametarisation, is
possible via this interface. Installing important connections are made
by spring terminals.
Pixels 752 (H) x 582 (V)
Synchronisation Internal with crystal
External with video signal
Line lock over 24 VAC
Electronic zoom 4x, adjustable
Horizontal resolution >570 TV lines
Minimum illumination 0.03 Lux (F1.0, AGC on)
S/N ratio >48 dB, weighted
Gain control Off / Auto (AGC), 0 ~ 24 dB
Electronic shutter Normal mode: 1/50 s
Flickerless mode: 1/120 s
ESC: 1/50 s to 1/30,000 s
Manual: 1/50 s to 1/20,000 s
Back-light compensation Select one of six zones
Camera titles 16 characters
Lens mount CS (C-mount adapter supplied)
Auto-iris control Direct drive or Video drive
Parameterisation setup TTL or RS485 (selectable)
Dimensions (W x H x D) 60 x 48 x 110.4 mm
Power requirements 12 VDC / 24 VAC, 3.0 W
cameras & domes