Transcript Slide 1
T e c h n i c a l P e t r o l e u m T r a i n in g I n s t i t u t e IWCF Drilling Well Control This course is conducted in English Course Overview : The IWCF certification is a simulator assessment and testing format only. The Drilling Well Control Certification Course addresses the basic principles and theory of well control along with the most commonly used well control techniques. Certification is awarded upon successful completion at Supervisor or Driller levels. Who should attend : Course Schedule 11-15 October 2010 Drilling Representatives, Drilling Supervisors, Toolpushers, Drillers, Assistant Driller, who desire IWCF certification as a Driller and Drilling Supervisor or for those who want a thorough knowledge of well control techniques, etc. Registration Fee : 65,000 Baht / US $ 1,950 Class Size Venue This fee does not include 7% VAT, accommodation, and transportation, but include 2 break and a lunch during the session day, instruction and instructional materials. Minimum 6 Maximum 15 TPTI Bangpu Training Center 919/9 Moo. 2 , Tambon Taiban, Bangpoo Samut Prakarn Province 10280 Thailand Course Instructor : Mr.Panus Innwon (Certified IWCF Assessor) Course Outline : 11-15 October 2010 11-14 October 2010 Time 8.30-16.30 Principles and Procedures Basic Terms, Definitions and Calculation for Well Control Normal / Abnormal pressures Well volume calculation SCR, LOT and MAASP Kick and Shut in procedures Shut in pressures Gas behavior Well killing Methods Problems while killing operations Kill Sheet calculation Gauge problem questions and actions Special Issues: Well Control Equipments • Auxiliary equipments • Annular and Ram type preventor • Surface BOP Stack, components • BOP control system • Diverter system • MGS, Vacuum degasser • BOP connections and ring joint gaskets • Subsea BOP system and procedures • Pressure testing of BOP stack • BOP Control Unit and trouble shooting • Simulator practice/Simulator Test Stripping operations and Remedies Test 15 October 2010 Time 8.30-12.00 Written Paper Test (by IWCF Invigilator) Note: Participants have to score minimum of 70% in each of the tests to qualify for the IWCF certificate. Validity of the IWCF certificate is two years. If a participant fails in any of the paper, he can re sit in the failed paper within two calendar months . Two attempts are allowed for re sit during this period. IWCF Certification is issued under TPTI center accreditation approved by IWCF and upon the successful of testing Payment/Cancellation The fee should be made in Thai Baht and payable to : Technical Petroleum Training Institute Account No: 026-4-01533-4 or Swift Code: SICOTHBK at Siam Commercial Bank Ltd., Ramatibadee Branch. The cancellation must be made and received by TPTI 14 days or more prior to the course. One half of the registration fee must be paid by those registrants who cancel less than 14 days before the program. Technical Petroleum Training Institute : BangpooTraining Center Technical Petroleum Training Institute : Head Office 6th Floor, Shinawatra Tower III 1010 Viphavadi-Rangsit Road, 919/9 Moo. 2 , Tambon Taiban, Bangpoo Samut Prakarn Province 10280 Thailand. Chatuchak, Bangkok 10900 Thailand. Tel: 66 2791 1729 Tel: 66 2 701 2279 Fax: 66 2 701 2280 http://www.tpti.org Fax : 66 2791 1730 http://www.tpti.org T e c h n i c a l P e t r o l e u m T r a i n in g I n s t i t u t e 1. REGISTRATION FEES : 65,000 Baht / US $ 1,950 Registration Form This fee includes 2 breaks and a lunch during the session days, instruction, and instructional materials, but does not include 7% VAT, accommodation and transportation. IWCF Drilling Well Control 11-15 October 2010 – English/Thai Version – 2. Venue -TPTI Bangpu Training Center 919/9 Moo. 2 , Tambon Taiban, Bangpoo Samut Prakarn Province 10280 Thailand Enrollment Information : (Please print clearly.) Last Name: First Name ( Mr / Ms / Mrs ) : Middle Name: Passport Country: Passport No. : Tel : Fax : E-mail : Mobile Phone : Position : Company : Company Address: Level IWCF Drilling Well Control Driller-Surface- IWCF Drilling Well Control Drilling Supervisor-Surface- IWCF Drilling Well Control Driller -Combined Surface & Subsea- IWCF Drilling Well Control Drilling Supervisor -Combined Surface & Subsea- Written test Language: English Version Signature: 3. Thai Version Others___________ Date: Payment Method : By cross cheque or bank draft payable to Technical Petroleum Training Institute Mail your payment with this registration form to TPTI. Enclosed is the cheque / draft for Baht By Address :6th Floor, Shinawatra Tower III, 1010 Viphavadi-Rangsit Road, Chatuchak, Bangkok 10900 Thailand. Wire transfer into the account ofTechnical Petroleum Training Institute Bank Name : Siam Commercial Bank Ltd., Branch : Ramatibadee Account No: 026-4-01533-4 or Swift Code: SICOTHBK 4. THREE EASY WAYS TO REGISTER : 1. FAX: 66 2 791 1730 2. 3. E-MAIL: [email protected] POST: Complete and return your form to: Technical Petroleum Training Institute 6th Floor, Shinawatra Tower III, 1010 Viphavadi-Rangsit Road, Chatuchak, Bangkok 10900 Thailand. Tel: 66 2 949 2330 Technical Petroleum Training Institute : BangpooTraining Center Technical Petroleum Training Institute : Head Office 6th Floor, Shinawatra Tower III, 1010 Viphavadi-Rangsit Road, 919/9 Moo. 2 , Tambon Taiban, Bangpoo Samut Prakarn Province Chatuchak, Bangkok 10900 Thailand. Tel: 66 2791 1729 10280 Thailand. Fax : 66 2791 1730 Tel: 66 2 701 2279 Fax: 66 2 701 2280 http://www.tpti.org