Transcript Style guide for GET presentations

Case Study Session in 9th GCSM:
NEGA-Resources-Approach
Prof. Dr.-Ing. Günther Seliger
13.05 2011
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
© IWF TU Berlin
Seite 1
Content
 Presentation of Technische Universität Berlin
 Presentation of the Production Technology Center
 Case Study in 9GCSM
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Seite 2
Content
 Presentation of Technische Universität Berlin
Presentation of the Production Technology Center
Case Study in 9GCSM
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Seite 3
Technische Universität Berlin
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Seite 4
History of TU Berlin
1770-1821 Founding of the
predecessors of the TU Berlin:
Mining Academy, Building
Academy, Vocational Academy
1879 Unification into Royal
Technical College of Berlin
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
1945-1946 Closure of the
Technical College of Berlin
and reestablishment under
the new name: Berlin
University of Technology
1950 Establishment of the
Faculty for Humanities
2001 Concentration of
teaching and research into 8
faculties
Seite 5
Technical University of Berlin
 biggest Technical University in Germany with 29234 students
 wide range of subjects (engineering, economics, social & arts)
 highest rate of foreign students in German universities (20%)
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Seite 6
Content
Presentation of Technische Universität Berlin
 Presentation of the Production Technology Center
Case Study in 9GCSM
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Seite 7
Production Technology Center
 Fraunhofer Gesellschaft – Institute for Production Systems and Design Technology (IPK)
 Technische Universität Berlin – Institute for Machine Tools and Factory Management (IWF)
 Design
 Manufacturing
 Assembly
 Processplanning/Logistics
 Control
 Qualitymanagement
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Seite 8
Laboratory of the PTZ
 Water Jet Cutting Machine
 Flexible Assembly Cell
 Laser Cutting Machine
 Autoclave-Oven
 Rapid Prototyping (Laser Sintering)
 Electrical Discharge Machines
 Cleaning and Decoating with Dry-Ice Blasting
 Different Kinds of Robots
 Press Working Line
 High Speed Cutting (HSC) Machines
 CNC-Machining Center
 Virtual Reality Laboratory
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Seite 9
Department of Assembly Technology and Factory Management
Director: Prof. Dr.-Ing. G. Seliger
18 Research Engineers
6 Staff Members
26 Student Researchers
Public Funds
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Industry Funds
Seite 10
Content
Presentation of Technische Universität Berlin
Presentation of the Production Technology Center
 Case Study in 9GCSM
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Seite 11
9th Global Conference on Sustainable Manufacturing (9GCSM)
September 28th– 30th, 2011 in St. Petersburg, Russia
www.gcsm9.dis.spbstu.ru
St. Petersburg State University
of Economics and Finance
St. Petersburg State
Polytechnic University
Vodokanal
St. Petersburg
 Students‘ Session of 9GCSM – Case Study
 NEGAtive resources are resources which could be saved by more efficient
technology.
 NEGA-Water
 Minimisation of water consumption and maximisation of water efficiency,
 Minimisation of energy consumption,
 Minimisation of resource consumption - MRO (maintenance, repair and
overhaul).
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
http://blog.pinkmap.de/wpcontent/uploads/2010/06/st.petersburg.jpg
 NEGA-Resource-Approach: Minimal Resources for Maximal Utility
Seite 12
NEGA-Resource-Approach in Water Supply and Use
 Participants
 22 students from Russia (FINEC & SPbSPU )
 5 students from GPE and 10 students from TU Berlin (Germany)
 Supervisors
 Supervisors from each university will lead the local students and organise the
meeting with other international partners.
Economic
Aspect
Technical
Aspect
Entrepreneurial
Aspect
Group 1
(18 students)
5 Students
7 Students (incl. GPE)
6 students
Group 2
(19 students)
5 Students
8 Students (incl. GPE)
6 students
SPbSPU & FINEC
TUB
SPbSPU & FINEC
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Seite 13
Supervisors from TU Berlin
M. Eng. Jialiang Hu
Dipl. Jur M.LL.P Julia Melikova
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Dr. Haiko Pieplow
M. Eng. Chenqing Wang
Seite 14
Students from TU Berlin
 15 students come from China, Germany, India, Mexico, Russia, Spain and Ukraine.
Hao XING
Jiong LIN
• Dipl.-Ing. (FH)Environmental
Engineering
• B.Eng. in Chemical Engineering
• Master in GPE Solar Technology
• B.Sc. Management Science and
Engineering
• Dual Program major in Logistics
As a student major on energy, I am very glad to be involved in
this project which is extremely interesting for me and also just
in time for the global developing orientation—sustainability
I am glad to join the vital team and do some innovative work in
water consumption
Tianxiang REN
Anton GORBOVYI
• B.Sc. Civil Engineering
• Master Logistics
• B.Sc. Mechanical Engineering
I appreciate very much the opportunity to face the challenge
with an international group, and I’m looking with confidence
to the success of providing better water for better St.
Petersburg
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
I believe that through changing of our attitude to visual
environment and with using of new technologies we can save
natural resources that are so needful for humanity existence
and Earth in whole
Seite 15
Students from TU Berlin
Andrea Silva MÉNDEZ
Phillip MIERSCH
• Industrial Engineering
• Masters of Engineering in Quality
Systems and Productivity.
• Master in GPE in Manufacturing
• B.Sc. System of Transportation
• Master Production Technology
I'm interested in the project, because is in our hands to
maintain the natural resources for future generations and
specially the fresh water is key to sustainable development!
This project will be a good chance for receiving impressions of
how other countries handle with water resources and jointly
trying to increase a sustainable behaviour
Michael AHLSWEDE
Christopher MÜNEBERG
• B.Sc. Mechanical Engineering
• Master-Dual-Degree Program
Sustainable Manufacturing
• B.Sc. Mechanical Engineering
• Master-Dual-Degree Program
Sustainable Manufacturing
I‘m very curious about the collaboration of an international
team and i hope to gather a lot of experiences by this project
work on sustainable aspects and to see how cities like St.
Petersburg are dealing with sustainability
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
I am interested in making our planet a little bit "greener". I
want to understand the interconnections of the three pillars of
sustainability: economy, ecology, and society. I hope to
improve my skills in these terms by working in an international
team
Seite 16
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Seite 17
Technische Universität Berlin
Institut für Werkzeugmaschinen und Fabrikbetrieb
Univ.-Prof. Dr.-Ing. Günther Seliger
Seite 18