Transcript Document
SPIRE Brokerage event October 22nd 2013 SPIRE 7 – 2015: Recovery technologies for metals and other minerals Project Idea Presentation Organizations (consortium) THIS PROPOSAL IS PRESENTED BY THE ESTEP COMMUNITY, SPECIFICALLY THE ORGANIZATIONS LISTED BELOW; ESTEP is the Steel Community's European Steel Technology Platform ARCELORMITTAL, the major steel producers in Europe IRT-M2P, a French national research organization devoted to technology R&I in the field of metals, coordinator etc… WWW.SPIRE2030.EU 2 Concept Europe exports a lot of end-of-life (EoL) materials (metals, plastics, paper, cardboard,...) and imports virgin raw materials to produce new material. For example, in 2010 Europe exported more than 44 Mt of ferrous scrap while importing tens of millions of tons of iron ore and coal. The objective of the project proposed is to find solutions to use currently exported EoL material, such as steel scrap, inside Europe and thus to reduce the need for virgin raw materials such as iron ore and coal. Because the EoL material exported from Europe is generally of low quality, the solution to be investigated & developed to reach this aim is to design a complete full-loop recycling route based on technologies & tools to treat EoL material and turn it into a purer raw material than has been the case until now. WWW.SPIRE2030.EU 3 Concept • To upgrade the EoL material, such as steel scrap, presently leaving Europe we will further develop and combine advanced & complementary solutions: – pre-dismantling of end of life goods – improved mechanical separation of the different materials (by enhanced shredding, shearing and separation technologies) – improved automatic sorting of the different materials based on detection tools using all physical and chemical properties available … and thus set up an effective and ambitious corecycling of the materials, most especially metals, assembled in consumption & investment goods WWW.SPIRE2030.EU Impact The objective is thus to narrow the gap between export of secondary and the import of primary resources. Note that this is different from increasing the collection of material from the urban/industrial mine, but rather to turn an already high throughput into a high-quality output that can be used locally rather than exported. The objective is thus to reduce the dependency of Europe on imports of resources and to increase the intensity of the close-loop economy at regional level, rather than close the loop at world level. This will also have positive consequences on the import and use of fossil fuels (coal & coke, in the case of the steel sector) and reduce the environmental burden, especially the carbon footprint but also air and water quality. The development of more sophisticated EoL materials treatment technologies will raise the level of competency in the sector, create more jobs and higher level jobs. WWW.SPIRE2030.EU 5 Looking for partners… 1. 2. 3. 4. Companies producing new material from EoL ones, such as the metal industry or the paper industry Companies & organizations collecting EoL goods and separating the different materials Companies & organizations developing separation tools Companies & organizations developing sorting tools WWW.SPIRE2030.EU 6 Contact details LOcally Closing the LOOP on EoL materials by QUALity upgrade LOCLOOPQUAL Coordinator: Gaël Fick IRT-M2P Email: [email protected] Mobile: +33 (0)6 42 16 85 01 Address: IRT-M2P – office C124 4, rue Augustin Fresnel - 57050 Metz - France WWW.SPIRE2030.EU 7 Presentation of consortium partners •ArcelorMittalArcelorMittal Global R&D – Recycling team •ArcelorMittal is the largest steel producer in the world. Around 1300 people work in R&D worldwide in ArcelorMittal laboratories, offering a broad expertise in most technical fields related to the steel industry. The company holds leadership positions in its main markets: automotive, construction, household appliances and packaging as well as general industry. •ArcelorMittal employs 280,000 people in over 60 countries. The company places its •commitment to sustainable development at the heart of its strategy and ambitions to be a benchmark for economic performance, labour relations and social responsibility. A steel recycling and scrap quality research group pursues R&D in this area, in connection with scrap dealers, steelmakers and manufacturers using steel. WWW.SPIRE2030.EU 8 Presentation of consortium partners IRT: Institute for Technological Research M2P: Materials – Metallurgy – Process. Focus on multi-materials especially metals Research institute, in creation: Status: Scientific cooperation foundation Fundings: 50% public, 50% private Forecast: around 60 people by end of 2016 Industrial Targets: Manufacturing lighter parts through microstructure control Improved Surface Functions Promote materials recycling, lower environmental impact Improve productivity & lower the energy consumption & improve the products quality WWW.SPIRE2030.EU 9