Transcript imz -tederam

SPIRE
Brokerage event
October 22nd
2013
SUSTAINABLE PROCESS
INDUSTRY
EUROPEAN INDUSTRIAL
COMPETTIVENESS TROUGH
RESOURCE AND ENERGY EFFICIENCY
Project Idea Presentation: TEDERAM
Organization
INSTYTUT METALURGII ŻELAZA
Karola Miarki Street 12-14, 44-100 Gliwice
Poland
Instytut Metalurgii Żelaza (IMŻ) – Institute for Ferrous Metallurgy, is a state owned research
centre, performing scientific and technological research, analyses, measurements and
consulting in the area of steel and steel products manufacturing and application.
Activities of IMŻ cover process (technology), product and business.
Leading competences: numerical modelling & physical simulation of technological
processes, tailor made steel design (composition & microstructure) for various
applications, BF burden preparation, expertise in properties of materials.
Close relations to the following sectors: steel industry, power generation, defence
industry, mining, automotive, railway transport. Active in ESTEP (WG1, WG5, WG6, Mirror
Group) and RFCS (SAG, TG6, proposals evaluation). Staff ca.120 people, in that 7
professors and 34 doctors.
WWW.SPIRE2030.EU
2
Project Idea Concept
PLEASE USE 2 SLIDES TO SUMMARIZE THE MAIN CONCEPT OF YOUR PROJECT IDEA AND
LINK IT TO THE RELEVANT KEY COMPONENT / KEY ACTION AS REFLECTED IN THE SPIRE
ROADMAP AVAILABLE AT HTTP://WWW.SPIRE2030.EU/ . INDICATE AS WELL THE CALL
TOPIC YOU WILL ADDRESS.
SPIRE Key Component 2: Process
Key Action 2.3: Process monitoring, control and optimization
Key Action 2.5: New energy and resources management concepts
Call topic: SPIRE 6 – 2015: Energy and resource management systems for
improved efficiency in the process industries
Project title:
„Adaptation of processing technologies to variability of physico-chemical
properties and deteriorating quality of raw materials, providing the required
quality of semi-products and products”
(TEDERAM : TEchnologies for DEteriorating RAw Materials)
WWW.SPIRE2030.EU
3
Project Idea Concept
Project title: „Adaptation of processing technologies to variability of physicochemical properties and deteriorating quality of raw materials, providing the
required quality of semi-products and products”
(TEDERAM : TEchnologies for DEteriorating RAw Materials)
Deterioration of quality of raw materials becomes (particularly in Europe) a growing
challenge for process industries. The main reasons of the problem are: decreasing
accessibility of natural raw materials of high quality and increasing variability and
inconsistency of chemical and physical characteristics of natural and secondary feed
materials.
Having at disposal worse raw materials the industries still have to provide the
products of acceptable quality. This requires development or adaptation of the
processing technologies which would allow to overcome the harmful effects of raw
materials quality deterioration.
The problem concerns the whole cycle of products manufacturing and downstream
processing - starting from feedstock preparation to final processing such as coating,
bending or joining, which may need to be adjusted to actual physico-chemical
properties of the processed material.
WWW.SPIRE2030.EU
4
Idea Impact
The new approach of the proposed project to the problem of deteriorating
quality of raw materials consists in comprising several sectors of process
industries (at least steel, chemical and minerals) in order to take advantages
of foreseen synergic effects.
The sources of the synegies are expected to be:
- cross-sectorial control of materials flow and
- dissemination of gained knowledge through the sectors.
The foreseen effects of results application of the proposed project are:
-increased use of alternative raw and secondary feed materials (i.e. of
lower quality and/or inconsitent parameters) in comparison with current
level,
- lower dependence on imports of raw materials from outside Europe.
They comply with the one of the main SPIRE ambitions, which is reduction
in the use of non-renewable primary raw materials up to 20% till 2030.
WWW.SPIRE2030.EU
5
TEDERAM: Examples of research areas
■ Adaptation of sintering technology to the feed mix with
prevailing proportion of powdery ore concentrate
■ Application of metallurgical slag for production of fertilizers
■ Method for production of synthetic pig iron from converter
sludges
WWW.SPIRE2030.EU
6
Existing Project Consortium
Project Consortium is in stage of organisation
Partners initiating the project:
Instytut Metalurgii Żelaza (IMŻ)
Karola Miarki Street 12-14, 44-100 Gliwice, Poland
VDEh-Betriebsforschungsinstitut GmbH (BFI)
Sohnstraße 65, D-40237 Düsseldorf, Germany
Talks with industrial partners started
WWW.SPIRE2030.EU
7
Looking for partners…
Partners, especially industrial entities, complying with the
project idea and scope are welcome to join the consortium.
WWW.SPIRE2030.EU
8
Contact details
Bogdan GARBARZ
Head of Department
of Manufacturing Technology and Application of Products
[email protected], tel. +48, 32 2345 249
INSTYTUT METALURGII ŻELAZA
Karola Miarki Street 12-14, 44-100 Gliwice, Poland
www.imz.pl
WWW.SPIRE2030.EU
9