Transcript Slide 1

EUGENE OR LATA 670
•
General Guidelines for SPOP
SPOP is ordered and implemented on a per switch, per LATA basis
–
•
•
•
•
•
•
•
•
Overflow is not permitted/allowed among/between different switches
SPOP conversions must follow CenturyLink project guidelines
Service Managers must obtain appropriate LATA Maps from the Wholesale SPOP website
and email diagrams to customer to complete
Service Managers will control and validate LATA Maps (diagrams) to be used in conjunction
with the Customer SPOP Checklist in the kick off (pre-provisioning meeting)
Completion of the SPOP Checklist and LATA Maps are required as part of the Joint Planning
Process
Customer is responsible for sharing LATA Maps, Customer SPOP Checklist and all
documentation related to SPOP with people within their own company associated with SPOP
implementation (e.g., Network, Order Writing, Provisioning, etc.,)
For WSPs, the Service Manager will assist the customer for localities where 2 way trunking is
not available due to cell pack feature unavailability.
SLRN may be in affect on your local trunk groups - Conversion to SPOP may result in traffic
pattern changes
You may not need a trunk group to the local tandem:
If you are only serving customers in this Local Tandem Area using a LRN that is outside of the Local
Calling Area and;
You do not have a full NPA-NXX and;
You exchange less than one DS1 or less than 512 BHCCS worth of traffic to the local tandem and you
are not using ARLRN but normal (default) routing
•
•
You may still want a trunk group to the local tandem for your originating traffic to CenturyLink
and other A-Record Holder Providers in the Local Calling Area
You will only need to connect to access tandems where you are the A-Record Holder doing
business served by that access tandem.
1
Rev. 03/16/2012
EUGENE OR LATA 670
Subtending
Localities
CUSTOMER NAME and ACNA
*ASHLAND
*CENTRAL POINT
*GOLD HILL
NPA-NXXs
ASLDOR55C9T
ACCESS TANDEM
*GRANTS PASS
*JACKSONVILLE
KLAMATH FALLS
LERG SWITCH
CLLI
*MEDFORD
*PHOENIX
*ROGUE RIVER
POI / ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 09/08//08
* Locality covered by local tandem –
submit diagram for local tandem,
also.
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
2
EUGENE OR LATA 670
•
•
•
•
•
•
INSTRUCTIONS
Use slide one as a template. Copy all and paste to new document
In top left box enter the full NPA-NXXs* assigned to the switch and in LATA 670 (on
ASR, full NPA-NXXs should go in CNPANXX fields on Translations Questionnaire.)
In center left boxes enter LERG switch CLLI (this is always the PSL on the Access
Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the
Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA
must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point
code (actual switch CLLI is always the CSL and the point code is entered in the
CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual
switch CLLI may be the same if the actual switch is in the same LATA and then PSL
and CSL would be the same CLLI.
EITHER enter a single line from POI/ACTL CLLI box to each access tandem circle
and label “2W SPOP COMBINED” and include quantity of trunks requested OR enter
2 lines from POI/ACTL CLLI box to each access tandem circle and label top line “2W
SPOP IXC” and bottom line “2W SPOP Local/Intra” and include quantity of trunks
requested.
Indicate the CenturyLink localities where you will be conducting business (pooling,
porting, etc) by changing the color to red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
Rev. 02/17/2012
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
3
EUGENE OR LATA 670
CUSTOMER NAME and ACNA
NPA-NXXs
EUGNOR53C9T
ACCESS TANDEM
LERG SWITCH
CLLI
Subtending
Localities
*ALBANY
MAPLETON
*BLUE RIVER
*MARCOLA
*CORVALLIS
*NEWPORT
*COTTAGE GROVE
*OAK RIDGE
*CULP CREEK
*OAKLAND
*EUGENE
*ROSEBURG
FLORENCE
*SILETZ
*HARRISBURG
*SPRINGFIELD
JEFFERSON
*TOLEDO
*JUNCTION CITY
*VENETA
*LEABURG
POI / ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 09/08/08
*LOWELL
* Locality covered by local tandem –
submit diagram for local tandem,
also.
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
4
EUGENE OR LATA 670
•
•
•
•
•
•
INSTRUCTIONS
Use slide four as a template. Copy all and paste to new document
In top left box enter the full NPA-NXXs* assigned to the switch (on ASR, full NPANXXs should go in CNPANXX fields on Translations Questionnaire.)
In center left boxes enter LERG switch CLLI (this is always the PSL on the Access
Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the
Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA
must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point
code (actual switch CLLI is always the CSL and the point code is entered in the
CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual
switch CLLI may be the same if the actual switch is in the same LATA and then PSL
and CSL would be the same CLLI.
EITHER enter a single line from POI/ACTL CLLI box to each access tandem circle
and label “2W SPOP COMBINED” and include quantity of trunks requested OR enter
2 lines from POI/ACTL CLLI box to each access tandem circle and label top line “2W
SPOP IXC” and bottom line “2W SPOP Local/Intra” and include quantity of trunks
requested.
Indicate the CenturyLink localities where you will be conducting business (pooling,
porting, etc) by changing the color to red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
Rev. 02/17/2012
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
5
EUGENE OR LATA 670
CUSTOMER NAME and ACNA
Subtending
Localities
ALBANY
NPA-NXXs
CRVSOR6534T
LOCAL TANDEM
CORVALLIS
LERG SWITCH
CLLI
If Existing POI/ACTL CLLI –
Identify the POI/ACTL CLLI
If Need New POI/ACTL CLLI
– Identify City Name for the
POI/ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 7/21/09
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
6
EUGENE OR LATA 670
INSTRUCTIONS
WARNING – SLRN may be in affect on your local trunk groups Conversion to SPOP may result in traffic pattern changes
•
•
•
•
•
•
Use previous slide as a template. Copy all and paste to new document
In top left box enter the full NPA-NXXs* assigned to the switch and in the CORVALLIS, OR LOCAL
CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations
Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE
INFORMATION.
In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page of the ASR)
and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another
OCN, LOA must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual
switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING
form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is
in the same LATA and then PSL and CSL would be the same CLLI.
Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP
LOCAL” and include quantity of trunks requested.
Indicate the CenturyLink localities where you will be conducting business by changing the color to
red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
Rev. 03/16/2012
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within that
time frame
7
EUGENE OR LATA 670
Subtending
Localities
CUSTOMER NAME and ACNA
BLUE RIVER
NPA-NXXs
EUGNOR5350T
EUGENE
LOCAL TANDEM
HARRISBURG
JUNCTION CITY
LEABURG
LOWELL
LERG SWITCH
CLLI
MARCOLA
OAK RIDGE
SPRINGFIELD
VENETA
If Existing POI/ACTL CLLI –
Identify the POI/ACTL CLLI
COTTAGE GROVE
If Need New POI/ACTL CLLI –
Identify City Name for the
POI/ACTL CLLI
CULP CREEK
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 7/21/09
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
8
EUGENE OR LATA 670
INSTRUCTIONS
WARNING – SLRN may be in affect on your local trunk groups Conversion to SPOP may result in traffic pattern changes
•
•
•
•
•
•
Use previous slide as a template. Copy all and paste to new document
In top left box enter the full NPA-NXXs* assigned to the switch and in the EUGENE, OR LOCAL
CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations
Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE
INFORMATION.
In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page of the ASR)
and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another
OCN, LOA must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual
switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING
form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is
in the same LATA and then PSL and CSL would be the same CLLI.
Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP
LOCAL” and include quantity of trunks requested.
Indicate the CenturyLink localities where you will be conducting business by changing the color to
red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
Rev. 03/16/2012
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within that
time frame
9
EUGENE OR LATA 670
Subtending
Localities
CUSTOMER NAME and ACNA
ASHLAND
CENTRAL POINT
NPA-NXXs
GRPSOR2951T
LOCAL TANDEM
GOLD HILL
GRANTS PASS
JACKSONVILLE
MEDFORD
LERG SWITCH
CLLI
PHOENIX
ROGUE RIVER
If Existing POI/ACTL CLLI –
Identify the POI/ACTL CLLI
If Need New POI/ACTL CLLI
– Identify City Name for the
POI/ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 7/21/09
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
10
EUGENE OR LATA 670
INSTRUCTIONS
WARNING – SLRN may be in affect on your local trunk groups Conversion to SPOP may result in traffic pattern changes
•
•
•
•
•
•
Use previous slide as a template. Copy all and paste to new document
In top left box enter the full NPA-NXXs* assigned to the switch and in the GRANTS PASS, OR
LOCAL CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations
Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE
INFORMATION.
In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page of the ASR)
and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another
OCN, LOA must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual
switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING
form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is
in the same LATA and then PSL and CSL would be the same CLLI.
Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP
LOCAL” and include quantity of trunks requested.
Indicate the CenturyLink localities where you will be conducting business by changing the color to
red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
Rev. 03/16/2012
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within that
time frame
11
EUGENE OR LATA 670
Subtending
Localities
CUSTOMER NAME and ACNA
ROSEBURG
OAKLAND
NPA-NXXs
RSBGOR5734T
LOCAL TANDEM
LERG SWITCH
CLLI
If Existing POI/ACTL CLLI –
Identify the POI/ACTL CLLI
If Need New POI/ACTL CLLI
– Identify City Name for the
POI/ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 7/21/09
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
12
EUGENE OR LATA 670
INSTRUCTIONS
WARNING – SLRN may be in affect on your local trunk groups Conversion to SPOP may result in traffic pattern changes
•
•
•
•
•
•
Use previous slide as a template. Copy all and paste to new document
In top left box enter the full NPA-NXXs* assigned to the switch and in the ROSEBURG, OR LOCAL
CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations
Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE
INFORMATION.
In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page of the ASR)
and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another
OCN, LOA must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual
switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING
form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is
in the same LATA and then PSL and CSL would be the same CLLI.
Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP
LOCAL” and include quantity of trunks requested.
Indicate the CenturyLink localities where you will be conducting business by changing the color to
red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
Rev. 03/16/2012
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within that
time frame
13
EUGENE OR LATA 670
Subtending
Localities
CUSTOMER NAME and ACNA
NEWPORT
TOLEDO
NPA-NXXs
SILETZ
NWPTOR2501T
LOCAL TANDEM
LERG SWITCH
CLLI
If Existing POI/ACTL CLLI –
Identify the POI/ACTL CLLI
If Need New POI/ACTL CLLI –
Identify City Name for the
POI/ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 7/21/09
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
14
EUGENE OR LATA 670
INSTRUCTIONS
WARNING – SLRN may be in affect on your local trunk groups Conversion to SPOP may result in traffic pattern changes
•
•
•
•
•
•
Use previous slide as a template. Copy all and paste to new document
In top left box enter the full NPA-NXXs* assigned to the switch and in the NEWPORT, OR LOCAL
CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations
Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE
INFORMATION.
In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page of the ASR)
and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another
OCN, LOA must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual
switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING
form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is
in the same LATA and then PSL and CSL would be the same CLLI.
Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP
LOCAL” and include quantity of trunks requested.
Indicate the CenturyLink localities where you will be conducting business by changing the color to
red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
Rev. 03/16/2012
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within that
time frame
15
EUGENE OR LATA 670
Subtending
Localities
CUSTOMER NAME and ACNA
Klamath Falls
NPA-NXXs
KLFLOR5401T
LOCAL TANDEM
LERG SWITCH
CLLI
If Existing POI/ACTL CLLI –
Identify the POI/ACTL CLLI
If Need New POI/ACTL CLLI –
Identify City Name for the
POI/ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 3/4/2010
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
16
EUGENE OR LATA 670
INSTRUCTIONS
WARNING – SLRN may be in affect on your local trunk groups Conversion to SPOP may result in traffic pattern changes
•
•
•
•
•
•
Use previous slide as a template. Copy all and paste to new document
In top left box enter the full NPA-NXXs* assigned to the switch and in the KLAMATH FALLS, OR
LOCAL CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations
Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE
INFORMATION.
In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page of the ASR)
and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another
OCN, LOA must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual
switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING
form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is
in the same LATA and then PSL and CSL would be the same CLLI.
Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP
LOCAL” and include quantity of trunks requested.
Indicate the CenturyLink localities where you will be conducting business by changing the color to
red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
Rev. 03/16/2012
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within that
time frame
17