Transcript Slide 1 - Nebraska Screw Press Home

OUR ‘ISO’ CERTIFICATIONS
CE Certification for our Leading Products
Qualities on which we stand


















1. All Steel fabricated.
2. Steel Casted Chamber in Single Pcs.
3. Tripple reduction helical gear box fitted with Graded Steel Casted Gears
& Alloy steel Pinion.
4. Cake thickness can be adjusted on running machine.
5. Best Quality of oil & cake.
6. Maintence Free Press.
7. Less Electrical Motor Require.
9. Minimum Space Require.
10. Hard Faced worms & Cages.
11. Water Cooling arrangement in Main worm Shaft to maintain the
temprature.
12. Main Worm Shaft can be withdrawn without disturbing the Gear Box.
13. Chambers are Vertically hinged,easy to open.
14. The Pressing worms, Cone,Discharge Ring & Compression Rings are
Hard Faced upto 3MM Thickness to have Better life.
15. Main Shaft is manufactured out of Carbon Steel EN-8.The best
recommended steel for Shafts & Axles.
16. All the Gears in Gear Box are of Graded Steel Castings & Pinion Shafts
are of EN-24, 55-65 Carbon Steel.
17. The Worms & Cages are made from EN8/EN9
18. All Gears & Pinions are running in the Oil bath & Bearings are also
Lubricated with Splash Lubrication.
GOYUM 1500:-
LEADING THE REVOLUTION IN EXPELLERS
HIGH CAPACITY:- 140 - 150 Tonne in Pre-Pressing
50 -60 Tonne in single and Final Crushing












1. This model has been designed in a Simple and
Symmetrical shape.
2. Triple reduction Gear Box with Helical Gear of
Cast Steel and Pinion Shaft of Special Steel.
3. Gear Box is aligned with all the bodies on a
single Fabricated Base.
4. This expeller has three chambers of cast steel,
vertically hinged. Each of 36” long.
5. Cake thickness can be adjusted on running
machine.
6. Worm assembly, discharge ring, Sliding ring,
all are hard faced welded.
7. Main Worm shaft can be withdrawn without
disturbing the Gear Box. The shaft is water
cooled.
8. Crammer shaft for Extra cramming of the seed
or cake is fitted on the feed body. The crammer
shaft is driven by Geared motor of 3 H.P.
9. Base and Bodies are fabricated from Mild Steel.
10. Superior Quality of Oil & Cake.
11. Low Maintenance.
12. Low Power Consumption.
FOR ACCURATE
COOKING OF SEED








1. This Cooker is supportedly
separately on a fabricated Steel
Structure.
2. This Cooker is divided in five stages
using 66”Diameter Steam Jackets for
efficient cooking of the seeds, nut or
meal.
3. Pipe fitting contains safety valve,
steam spray pipe.
4.Aspiration system is also provided to
extract excess steam or moisture from
the cooking chambers.
5. Doors or openings are provided in
each section for cleaning and fitting of
agitators.
6. Indicatiors are fitted to indicate the
level of the seed or meal in all the
sections.
7. Gear Box :- Worm Reduction Gear
Box of Vertical Type.
8. Power Consumption:- 3 Phase 25
H.P motor of 1440 RPM.
MOST COMPETITIVE











1. Steel Fabricated Base & Body.
2. Double reduction Gear Box with helical
gears of Cast Steel.
3. Cast Steel chamber of 45”X 7.5” Dia. Of
Four sections is vertically hinged.
4. Cake thickness can be adjusted on
running machine.
5. Case hardened worm assembly
assembly with hard faced discharge ring &
compression ring.
6. Main worm shaft can be withdrawn
without disturbing the gear box.
7.Crammer Shaft gives extra cramming of
the seed or cake in the feed body.
8. Low Power Consumption.
9. Maintenance Free.
10. Superior Quality of oil & cake.
11. High Capacity
MOST ECONOMICAL











1. Our oldest and economical model.
2. Double reduction Gear Box of Cast
Iron Body and Mild Steel fabricated
Gears.
3. The machine has to be stopped for
adjusting the cake thickness.
4. Case hardened worm assembly and
cone point.
5. Main Worm Shaft can be withdrawn
without disturbing the Gear Box.
6. Crammer Shaft gives extra cramming
of the Seed or Cake in the Feed Body.
7.Superior quality of Oil & Cake.
8.Low Maintenance.
9. Steel Fabricated base.
10. Chamber is made from Mild Steel
plates.
11. Low Power Consumption.
COMPACT AND STURDY










The whole body is fabricated from
Mild steel material.
Steel Casted Chamber.
The Screw Press is directly coupled
with Geared Motor.
Cake thickness can be adjusted on
the running machine.
Best Quality of Oil Cake.
Low maintenance required.
Power Consumption: 7.5 H.P Motor of
1440 r.p.m.
Less space requirement.
Hard faced worm assembly.
CE Certified.
FILTER
PRESSES:-
For filteration of Oils, Chemicals, Paints,
Varnishes, Pottery Clay and other Liquids.




Two flat Side Bars are provided on
which filter plates rest to stand extra
pressure.
Heavy types steel screw nut is fixed in
the screw plate and best quality steel
screw rod is provided with pressure
pulley.
Cast Iron jam nuts and petcocks of
special design are provided for better
filteration.
The casting is heavier and carefully
machined and each plate is grinded
to avoid leakage.
SINGLE AND DUPLEX FILTER PUMP:Heavy type plunger pumps serves two fold purpose,
filteration as well as delivery.
FEATURES OF OUR SPARES:HIGH QUALITY
COMPLETE ACCURACY
LONG LIFE & DURABILITY
MATERIAL HANDLING EQUIPMENT;-
SCREW CONVEYORS & ELEVATORS
GOYUM BOILERS:FOR ACCURATE STEAM PRESSURE FOR SEED
PREPARATION
SEED PREPARATORY
EQUIPMENT
HAMMER MILL
SEED CLEANER
SEED PREPARATORY
EQUIPMENT
SOYA CRACKER
SEED CLEANER
MEAL COOLING SYSTEM FOR
LARGE OIL EXTRACTION PLANTS