Transcript Document

Disassemble,
Assemble and
Perform a Function
Check on the M249
Terminal Learning Objective
Action: Disassemble, Assemble and Perform
a Function Check on the M249 Squad
Automatic Weapon (SAW)
Conditions: Given a M249 Machine Gun
and a requirement to disassemble, assemble
and perform a function check on the weapon
Standards: Properly disassemble, assemble
and perform a function check on the M249
Squad Automatic Weapon (SAW)
2
Rear Opening of the Receiver
3
Removal of the Return Rod and
Transfer Mechanism Assembly
4
Removal of the Spring
5
Removal of the Operating Rod, Slide
Assembly, and Bolt Assembly
6
Removal of the Bolt and Piston
7
Removal of the Heat Shield
8
Removal of the Barrel
9
Removal of the Handguard
10
Insertion of the Scraper Assembly
11
Removal of the Gas Regulator from
the Gas Block
12
Removal of the Buttstock and Buffer
Assembly
13
Removal of the Trigger Mechanism
14
Removal of the Gas Cylinder
15
Removal of the Bipod
16
Replacement of the Bipod and Gas
Cylinder
17
Replacement of the Handguard
18
Replacement of the Gas Regulator
19
Replacement of the Gas Collar
20
Replacement of the Barrel
21
Replacement of Trigger Mechanism
22
Replacement of the Buttstock and
Shoulder Assembly
23
Attachment of the Slide Assembly to
the Piston
24
Attachment of the Bolt Assembly to
the Slide Assembly
25
Replacement of the Operating Rod,
Slide Assembly, and Bolt Assembly
26
Replacement of the Spring
27
Replacement of the Return Rod and
Transfer Mechanism Assembly
28
Replacement of the Rear of the
Receiver
29
Replacement of the Heat Shield
Assembly
30
Terminal Learning Objective
Action: Disassemble, Assemble and Perform
a Function Check on the M249 Squad
Automatic Weapon (SAW)
Conditions: Given a M249 Machine Gun
and a requirement to disassemble, assemble
and perform a function check on the weapon
Standards: Properly disassemble, assemble
and perform a function check on the M249
Squad Automatic Weapon (SAW)
31