Transcript PowerPoint 프레젠테이션

USER’S Manual
- Digital Video Recorder
CONTENTS
Chapter1. Introduction --------------------------------------------------------------------------------3
Chapter 2. Display Mode
2-1. Display screen functions ---------------------------------------------------------4
2-2. Operation -------------------------------------------------------------------------5-7
Chapter 3. Setup Mode
3-1. Overall --------------------------------------------------------------------------------8
3-2. System setup -----------------------------------------------------------------------9
3-3. Camera setup ---------------------------------------------------------------------10
3-4. Recording setup ------------------------------------------------------------------11
3-5. Sensor & Control setup ---------------------------------------------------------12
3-6. Motion & Color setup ------------------------------------------------------------13
3-7. Media setup ----------------------------------------------------------------------14
3-8. Audio setup ------------------------------------------------------------------------15
3-9. Network setup --------------------------------------------------------------------16
3-10. Password setup ----------------------------------------------------------------17
3-11. System Information -----------------------------------------------------------18
Chapter 4. Search Mode
4-1. Overall ------------------------------------------------------------------------------19
4-2. Search screen function ---------------------------------------------------------20
4-3. Index search and Screen Division Buttons --------------------------------21
4-4. Playback function ----------------------------------------------------------------22
4-5. Backup ------------------------------------------------------------------------------23
4-6. Watermark -------------------------------------------------------------------------24
4-7. Print and Refresh ---------------------------------------------------------------25
4-8. Log files ----------------------------------------------------------------------------26
4-9. Bookmark --------------------------------------------------------------------------27
Chapter 5. Forced Recording ---------------------------------------------------------------------28
Chapter 6. PTZ Camera control --------------------------------------------------------------29-30
Chapter 7. Snapshot and Snapshot Viewer ---------------------------------------------------31
Chapter 8. Alarm and Popup ----------------------------------------------------------------------32
Chapter 9. REMOTE SOFTWARE
9-1. Overall -------------------------------------------------------------------------------33
9-2. Web Browser ----------------------------------------------------------------------34
9-3. Remote site software
9-3-1. Installation ------------------------------------------------------------------35
9-3-2. Remote site Screen and Functions ----------------------------------36
9-3-3. Remote Site Setup -------------------------------------------------------37
9-3-3-1. System setup ---------------------------------------------------38
9-3-3-2. Main (Server) DVR address setup ------------------------39
9-3-3-3. Group (Monitoring Group) Setup --------------------------40
9-3-3-4. System Information -------------------------------------------41
9-3-4. Remote Site Search and Backup -------------------------------------42
Chapter 10. DvrPlayer
10-1. Installation -------------------------------------------------------------------------43
10-2. Detail descriptions of tool bar (Quick control) ----------------------------44
10-3. Detail descriptions of menu ---------------------------------------------------45
------------------------------------------User’s Manual NBCard V.3.0.3
-2-
Chapter1. Introduction
Our DVR (Digital Video Recorder) is an advanced, total system solution that provides
monitoring and recording the images from the video inputs like CCD cameras, C-TV, etc,.
The system is based on standard PC platform Windows 2000/XP(H.E).
To use our system :
1) Install our DVR capture card in your system and connect cameras to the video
input of capture card.
2) Install drivers of capture card.
3) Install our DVR programs –DvrMainXPro(Home) V.XX.X.exe
- There are 2 versions in our DVR program
* Pro DVR Version : We recommend to use only in DVR system for professional
security.
* Home DVR Version : You can use DVR system for normal PC program for
home or SOHO user.
Our System is consisting of two major components : DvrMain and DvrRemote.
DvrMain : Consists video capture board and Main System Application.
This system is responsible for the monitoring and recording of the video event
from the cameras.
There are 2 versions in our DvrMain programs explained above.
DvrRemote : This is a Network Application program.
This application is for viewing video surveillance system’s video event from
a remote PC through LAN or internet.
DVR/PC
------------------------------------------User’s Manual NBCard V.3.0.3
-3-
Chapter 2. Display Mode
2-1. Display screen functions
Install related devices – Camera, Sensor, etc., And double click DvrMain icon in the desktop screen.
If you connect all camera correctly, monitoring screen appears as below.
10
1
2
3
9
8
7
6
4
5
1. Date and Time Indicator – Displays current date and time.
2. Function Panel – For Search, Setup, Forced recording, PTZ Control, Snapshot,
Snapshot Viewer, Alarm OFF, POPUP
3. Picture control buttons : Control brightness, contrast, hue and saturation.
4. Sensor in buttons(1-4/8/16) – Turns the button color yellow when connected sensor
has been activated. If you press the activated button, turn the connected
control device OFF.
5. Control out indicator – Turns button color yellow and activate connected
alarm device when an sensor has been activated
6. Camera Select and Recording Status Buttons – Single camera display
select and indicating recording status. (Turns button color red and flicker)
7. Network state Indicator – Flickers means that someone is connected via network
8. Screen Division, Full Screen and Auto switching Buttons
9. Power button – You can choose power (System off) or Windows mode.
You can set the ID/password and control level in option setting mode.
10. Display screen minimize button. (Only in home DVR version)
------------------------------------------User’s Manual NBCard V.3.0.3
-4-
Chapter 2. Display Mode
2-2. Operation
Channel selection and Recording status
-The number colored circle(1-16 or 1-8 or 1-4) located in the lower part of the screen
indicates the camera number and recording status of the camera and channel selection.
- Flicker the channel number indicator means recording now.
VIEW
It is not necessary to use the screen division buttons located in the lower left corner
of the screen to change the camera view. You can use the left and right mouse buttons
to instantly view a single camera or remove the menu bars from the display.
To change screen view :
1. Move the cursor to the desired camera view and double click with the left mouse
button. A single view of the selected camera appears. Double click the left mouse
button one more time to return the previous multiple screen view
2. To switch to full screen view(remove menu bars from the display), click the right
mouse button on the screen. Click the right mouse button one more time to return
the previous view.
Sensor in and Control out
Sensor in buttons(1-16 or 1-4. 1-8)
Control out LED(1-4)
Beefs (or alarms) and flickers when sensor is activated.
If you want to cancel the beefs (or alarm), just click the number that flickering.
Picture quality adjust
Adjust the brightness, contrast, hue, and
saturation by dragging the designated buttons.
Select Default to reset them to default settings.
------------------------------------------User’s Manual NBCard V.3.0.3
-5-
Chapter 2. Display Mode
Screen Division, Full screen and Auto switching buttons
Quad display, cameras 1-4 ,5-8, 9-12, 13-16 at each click
9 cameras display, cameras 1-9, 10-16 at each click
(in 8/16 channel model)
Displays all 16 cameras(in 16 channel model)
Full-screen display – Removes menu bars from display. Double click the
right mouse button to return to previous screen display.
Sequencing mode – Sequence using single, four, or nine camera displays.
You can set switching time at the camera setup.
- In 4Ch division
1
2
5
6
9
10
13 14
1
2
3
4
7
8
11 12
15 16
3
4
4C
4D
4A
4B
4A
- In 9Ch division
1
2
3
8
9 10
1
2
3
4
5
6
11 12 13
4
5
6
7
8
9
14 15 16
7
8
9
9A
------------------------------------------User’s Manual NBCard V.3.0.3
9B
9A
-6-
Chapter 2. Display Mode
Function Panel
Search
Snapshot
Option
setting
Snapshot
viewer
Forced
recording
PTZ
control
Alarm ON/OFF
(Camera)
POP-UP
-You need ID and password to use search, Option setting and PTZ control.
- Initial ID/password is guest/guest.
------------------------------------------User’s Manual NBCard V.3.0.3
-7-
Chapter 3. Setup Mode
3-1. Overall
To setup the this Digital Video Recorder, use the left mouse button and
click on the option setting button located in the function panel.
Option setting button
This function is used when you need to setup a new environment for DVR,
but users can not change setup at his disposal without password.
- You need to set password in the setup mode.
- Initial ID/password is guest/guest.
guest
XXXXX
If you type correct ID/password and click “OK” , setup mode screen shows
as below. -If you do not set password, just click “ok”
------------------------------------------User’s Manual NBCard V.3.0.3
-8-
Chapter 3. Setup Mode
3-2. System setup
1
2
4
3
6
5
7
8
9
10
1. Video Format : NTSC/PAL signal selection switch
2. Time Format : Type of display date/month/year selection switch
3. Rotation Interval : Set the rotation time between picture division
4. TV Out : Click and set the desired channels to display in the TV monitor by
1 channel rotationally and rotation interval.
5. Rebooting : Set the day and time system will reboot.
- If you do not set this rebooting, system rebooting 1 time/week automatically.
6. Language : Select the language which you want.
7. Add Printer : You can set the printer.
8. Snapshot - If you want to use snapshot function, you must check Channel.
-Channel : When you click Snapshot button, channel No. will printed in snapshot picture.
-Comment : When you check Comment, channel name will printed in snapshot picture.
-Display Mode : Check the channel which you want to capture the image.
* If you do not check the Channel and display mode, snapshot does not work.
9. LogFile Setting : Check the item which you want to record the event in log file.
10. Move channel : You can exchange channel address by drag and drop method.
- This function will help you that you need not to rearrange the camera
connection installation for exchange channel number display in monitor.
------------------------------------------User’s Manual NBCard V.3.0.3
-9-
Chapter 3. Setup Mode
3-3. Camera setup
1) Click the use box to enable a camera for setup.
2) Enter or Click the name, event recording, popup, sensor and ptz use if you
want to use or setup each function.
1
2
3
4
5
6
1. use : Click the use box to enable a camera for use
DVR recognize this check and check the camera work well or disconnect.
-In case of 4/8 channel, the number appears from 1 to 4(8).
2. name : Enter the camera name (location, etc,.) in the name box
3. event recording : By storing the previous image when motion or sensor
is detected, you can check before and after context of event.
You can set the image of previous event by frame numbers. (Max 5 frames)
4. popup : Check the channel you want to popup when motion or sensor detected.
- Popup work only when you set as below
1) Check channels in camera setup
2) Set the motion area in motion/sensor setup
3) Motion, sensor, motion_sensor recording setting in recording setup
5. sensor : Enter the sensor number to trigger the camera
6. PTZ : Check the channel you connected PTZ camera.
(Set pan and tilt protocol in the PTZ control panel of display screen.)
------------------------------------------User’s Manual NBCard V.3.0.3
-10-
Chapter 3. Setup Mode
3-4. Recording setup
1
3
2
4
6
5
7
9
8
1. Channel select button to setup specific channel.
-In case of 4/8 channel, the number appears from 1 to 4(8).
2.3. Recording method and schedule
- You can set recording method by each pixel.
4. Schedule copy
- After set one channel, you can set all channel same easily by schedule copy.
5. Holliday setting
- If you set a day for holiday, that day work same as Sunday.
6. Frames per sec : Recording speed setting
7. Resolution : Picture resolution setting (320x240, 640x240, 640x480)
8. Compression quality : Selection of compression picture quality
-Low (Low picture quality) : When recording scope is very wide range.
-Middle(normal picture quality) : When recording scope is narrow.
-High(High picture quality) : When recording use auto PAN/TILT/ZOOM function.
-Super(Best picture quality) : Special use.
9. Camera OFF Alarm
-You can set the alarm type when camera disconnected.
------------------------------------------User’s Manual NBCard V.3.0.3
-11-
Chapter 3. Setup Mode
3-5. Sensor & Control setup
1
2
3
4
5
6
7
8
9
Sensor Input
1. Use : Set the external sensor 1~16 you desire.
Select the sensor up to the number of installed sensor.
-In case of 4 channel, the number appears from 1 to 4.
2. Name : Enter the name of the sensor in the name box
3. NO, NC : Set the type of sensor
4. Duration(sec) : Select the keeping time of automatic “ON” state by
the second that work after sensor is detected.
5. beep : Beeps when sensor is activated.
6. control : Enter the control output number that you want to connect and
activate, when sensor is detected.
Control Output
7. Use : Set the external control output 1~4. Select the sensor up to number of
installed sensor.
8. Name : Enter the “machinery name” you desired to control .
9. Turn on time : Enter the beginning and ending time you desired to activate
connected control device.
------------------------------------------User’s Manual NBCard V.3.0.3
-12-
Chapter 3. Setup Mode
3-6. Motion & Color setup
1
3
4
5
2
6
7
8
1. Channel select button to setup motion & color
-In case of 4/8 channel, the number appears from 1 to 4(8).
2.3. Motion area setting : To select a detection area, move the pointer to the
desired area. Hold down the left mouse button and drag over the area.
Release the left mouse button to end selection. A maximum of 10 detection
areas can be set per camera.
If you want to delete a area, simply drag the area to the out of the window.
4. Secret channel : If you check “use” in specific channel, checked channel display
color pattern bar instead of camera image. But the camera image will recording.
5. alarm color : Line color selection when motion is detected in detection area,
6. sensitivity : Adjust the sensitivity of the detection areas.
7. beep : Beeps when motion is detected
8. Color
brightness – Adjust the BRIGHTNESS of the viewed and recorded scene.
contrast – Adjust the CONTRAST of the viewed and recorded scene.
saturation – Adjust the SATURATION of the viewed and recorded scene.
hue – Adjust the hue of the viewed and recorded scene.
default – Return all level settings to their defaults.
------------------------------------------User’s Manual NBCard V.3.0.3
-13-
Chapter 3. Setup Mode
3-7. Media setup
After you install DVR program, you must to set up media to start recording.
1) Select recording drive in 2.
2) Click “Add” button to set the recording spaces.
- Repeat same step to set another drives for recording drives (spaces)
- Display the information of each added recording drive in window 1.
* Pro version programmed that C: drive cannot record the images for system stability.
1
2
3
4
5
1. This window displays the information of HDD for the DVR recording space.
If this window do not display drives, DVR can’t start recording.
2. It displays total space and free space for selected drive.
3. Add
-It use to add drive to recording space for DVR.
-If you select specific drive and click “Add”, selected drive display in window.
Then selected drive use as recording space for DVR.
4. Delete
- To use delete drive as not use recording space.
5. Refresh
To use to know the new information of selected drive.
------------------------------------------User’s Manual NBCard V.3.0.3
-14-
Chapter 3. Setup Mode
3-8. Audio setup
1
2
2
1CH
1CH
1. Audio no : Select the audio channel to recording designated camera
number
2. sensitivity : Adjust the sensitivity of the audio
3. Play audio channel : Select the audio number to hear in multi channel
display mode.
------------------------------------------User’s Manual NBCard V.3.0.3
-15-
Chapter 3. Setup Mode
3-9. Network setup
1
3
2
1. Service port
Our Network program use 80 port in web, 3040 port in remote program
2. E-mail Setup
E-mail function works only when SMTP server does not require
ID and password.
3. DDNS (Dynamic Domain Name Service)
If you use dynamic ip service, you must setup as below
1) Server : cqone.com
2) Port : 3030
3) Product ID : Use number attached in Program CD
4) User ID : Name as you want .(Ex : dvrshop)
5) Password : Type your password.
6) Confirm : Conform typed above in password.
7) E-mail : Type your e-mail address if you want to receive information.
8) Address : After setup above required information, you can connect
your DVR in remote PC in Explorer as below.
http://dvrshop.cqone.com
------------------------------------------User’s Manual NBCard V.3.0.3
-16-
Chapter 3. Setup Mode
3-10. Password setup
2
1
1-1
1-2
1-4
1-3
1. Add User : To use to register, delete or modify the user.
1-1. Display users to permitted( registered user)
1-2. Authority level selection
- A registrant authority assignment can set at 2 .
1-3. Type user name, password and etc.
1-4. To use for add, delete, modify the user.
2. Permission : You can set a registrant authority level.
- Initial ID/password is guest/guest
------------------------------------------User’s Manual NBCard V.3.0.3
-17-
Chapter 3. Setup Mode
3-11. System Information
1. System Information
- It display system, DVR card and software information.
2. Tech. Support
- If you have any trouble, use this contact point.
------------------------------------------User’s Manual NBCard V.3.0.3
-18-
Chapter 4. Search Mode
4-1. Overall
To search the this Digital Video Recorder, use the left mouse button and
click on the SEARCH button located in the function panel.
SEARCH
This function is used when you need to search the recording images of the DVR,
but users can not search at his disposal without password.
- You need to set password in the option setting mode.
- Initial ID/password is guest/guest.
If you type correct ID/password and click “OK” , search screen shows as below.
------------------------------------------User’s Manual NBCard V.3.0.3
-19-
Chapter 4. Search Mode
4-2. Search screen function
16
1
2
3
4
5
6
7 8 9 10
11
15
14
13 12
17
1. Date and Time Indicator – Displays current date and time.
2. Index Search Buttons : Continuous, Motion, Sensor, Motion or Sensor recording
search
3.4. Screen Division Buttons and 1 Camera select Buttons
You can search 1, 4, 9 ,16 channel mode.
5. Playback Buttons
6. Play speed, Brightness and audio volume Buttons
7. Backup Button
8. Print Button – Print image.
9. Refresh Button – Refresh the recording images which recorded while you search.
10. Log file Button
11. Calendar window – Displays calendar with recording days highlighted.
12. Quick minute search Button
13. Quick time search bar
14. Recording status window
RED : continuous recording
BLUE : motion detection recording
YELLOW : sensor input recording
No Line : no recording status
15. Channel selection scroll
16. Book mark function
17. Exit - Exit to display mode
------------------------------------------User’s Manual NBCard V.3.0.3
-20-
Chapter 4. Search Mode
4-3. Index search and Screen Division Buttons
You can use index search for quick search by recording event (All, Motion, sensor).
Click the button which type you want to search.
Motion
Motion or Sensor
Sensor
All
Screen Division Buttons
9 division
4 division
Full screen
16 division
You can playback the recording images in any screen mode(1/4/9/16) but the
playback speed is slower in multi screen division mode than 1 screen mode.
If you want to playback in full screen, click
click right mouse button on the screen.
<Normal screen playback>
button or
<Full screen playback>
Tool bar disappears during the playback in the full screen mode.
Tool bar appears automatically when you move the cursor on the screen
to control the playback buttons.
* Home version does not have full screen search function.
------------------------------------------User’s Manual NBCard V.3.0.3
-21-
Chapter 4. Search Mode
4-4. Playback function
Stop
Playback
1 Frame Advance
1 Frame Reverse
Go to the first image
recorded on HDD
Go to the last image
recorded on HDD
Reverse Playback
Play speed , Picture and audio volume Buttons
Play Speed control Buttons (From 0.5X to 10X)
Frame Skip Buttons (play only I frames)
Brightness – Adjust levels for recorded image.
(Only one camera mode can be used)
Audio Volume Button (Reserved)
------------------------------------------User’s Manual NBCard V.3.0.3
-22-
Chapter 4. Search Mode
4-5. Backup
Click the backup button(
) in the search screen.
- Backup image cannot be done when the viewing screen is divided.
Before you click backup button, select desired 1 channel.
1
2
XXX
3
5
4
6
7
1. Select Still picture or Motion picture
2. Enter the file name.
3. Select the Star time and End time of backup images.
4. Select backup device. (CD-RW or other drives)
- CD Format support only DirectCD type.
5. Select the option
-Watermark
6. Click on the calculate size button.- It will take time to calculate the backup image size.
-In case of FDD, file size must be under 1.4MB
-In case of CD Disk, file size must be under CD disk size(usually under 750 MB)
7. Click OK to save.
- Wait until the progress bar disappear.
------------------------------------------User’s Manual NBCard V.3.0.3
-23-
Chapter 4. Search Mode
4-6. Watermark
The Watermark tool allows you to verify if an original image has been altered.
The Watermarking check is available by DvrPlayer.
Watermarking operation
1. Start DvrPlayer.
2. Open backup file which you want to check.
-The backup file must to check watermark in option when you backup it.
3. Click the option and check the authentication in DvrPlayer.
4. If backup file altered, altered frame lists show as below.
Authentication failure!
 You can see the altered frame by detailed search in DvrPlayer.
Open/Close File Play
Save as..
------------------------------------------User’s Manual NBCard V.3.0.3
Pause
1 frame
Advance
Full Screen
Stop
-24-
Chapter 4. Search Mode
4-7. Print and Refresh
Print (Images) /Refresh
Printer button
1. Select one camera.
- Printing an image cannot be done when the viewing screen is divided.
2. Click the PRINT button. The PRINT window appears as below.
3. Use Save, print, size control, close functions as your purpose.
Refresh
Refresh button
Recording data during the playback does not display in the recording
status window.
If you want to recording status after you start search, click the refresh button.
------------------------------------------User’s Manual NBCard V.3.0.3
-25-
Chapter 4. Search Mode
4-8. Log files
LogFile button
If you want to see the DVR event logs, click log file button.
Then below information will be listed.
-Camera (disconnected/connected)
- Control (activate)
- Net (network connected)
- PanTilt (control)
- Sensor (activate)
- System (ON/OFF)
- Login (history)
List by event
List all
Page Up/Down
Exit
Present Page
Print
------------------------------------------User’s Manual NBCard V.3.0.3
-26-
Chapter 4. Search Mode
4-9. Bookmark
If you want to mark specific scenes during the playback (search),
use bookmark function located on the top of search screen.
Delete Go/Start
-Add : Add to bookmark list
-Delete : Delete selected event
-List : List the bookmark
-Go : Do to selected event
If you click list(
Add
List
)button, below screen displays.
1
2
3
4
High
Normal
Low
1. Displays event number in sequence.
2. Displays importance in three level (High, Normal, Low).
- You can set the importance in the right side.
3. Displays the time where you bookmark.
4. Displays comment which you typed for reference.
------------------------------------------User’s Manual NBCard V.3.0.3
-27-
Chapter 5. Forced Recording
Forced recording Button
Forced recording function use when suspicious moving happens in the screen.
If you click the forced recording button, DVR will record all channel continuous
mode with full speed during 10 seconds.
------------------------------------------User’s Manual NBCard V.3.0.3
-28-
Chapter 6. PTZ Camera control
PTZ CONTROL Button
To operate pan/tilt/zoom functions on controllable systems do the following :
1. Click the
button on the function panel, then below panel appears.
-If you set the password at setup mode, you need to type ID and password.
Camera number
Camera direction control
ZOOM Control
FOCUS Control
AUX1.2 Control
Expanded functions door open/Close
Light Camera
Power
2. Select a camera number.
3. Use the buttons to pan left and right.
4. Use the buttons to tilt up and down.
5. If required use the FOCUS settings (+/-) to obtain the clearest picture.
6. Use the ZOOM settings (+/-) to zoom far/near.
PTZ control setting
Click setting which appear when right mouse click on the PTZ panel,
below camera setting window appears.
Set to installed PTZ camera - Camera model protocol
- Address/Speed, Data bit/Parity bit, Stop bit
C:\Program Files\DVR\DvrMain\PTZ\daiwa_pm.ptc
------------------------------------------User’s Manual NBCard V.3.0.3
-29-
Chapter 6. PTZ Camera control
Expanded functions door open status
Depend on the installed PTZ camera, below control panel appears.
A type
------------------------------------------User’s Manual NBCard V.3.0.3
B type
-30-
Chapter 7. Snapshot and Snapshot Viewer
Snapshot Button
If you press this button, images in the display screen will recorded still picture
in the snapshot folder
To see this still picture, use snapshot viewer button below.
* To use snapshot function, you must set the below 2 setting in the system
setting of option setting.
-Check the channel and display mode in snapshot menu.
Snapshot Viewer Button
To see recorded still picture with SNAPSHOT, click snapshot viewer button.
Then select the specific image which you want .
* Recorded images in snapshot folder (or directory) store only 7 days.
Dvr system delete the images automatically for system efficiency after 7 days.
1. Selection of directory or folder
2. Selected image - Use save for backup, print or size control button as your purpose.
------------------------------------------User’s Manual NBCard V.3.0.3
-31-
Chapter 8. Alarm and Popup
ALARM
Alarm ON/OFF button
If connected camera does not work, alarm or beefs sound occur.
To off the alarm sound, use alarm on/off button.
Alarm sound can select in system setting .(Default is beef sound)
POPUP
Popup button
If you want to popup the screen in full screen when motion or sensor
activated in specific channel, use popup function.
You can choose the usage of popup and channels in the camera and
recording setting.
* Popup function operate only when
- You check the popup usage channel in the camera setting.
- Record program is motion or sensor recording mode in the recording
setting.
- In case of motion popup, you must set the motion area.
! IMPORTANT : Channel selection buttons and screen division buttons have
priority to popup function.
When you control manually channel selection buttons or
screen division buttons, popup function stops automatically.
------------------------------------------User’s Manual NBCard V.3.0.3
-32-
Chapter 9. REMOTE SOFTWARE
9-1. Overall
If the main DVR have connected with network (LAN, ADSL , Modem, etc,.),
you can connect and perform monitoring, search without additional hardware
from remote place.
Our remote software use TCP/IP protocol in network program.
There 2 ways to connect to main (server) DVR.
1) Web Brower : Web server function already included in main DVR program
- Use 80 and 3040 port for port forwarding.
2) DvrRemote program : You need to install our remote program in your PC.
Use 3040 port for port fording.
1-1. Network setting of main DVR
- If you want to connect to main DVR in remote place, you need to network
setting of main (Server) DVR.
- You can setup network setting in window mode.
1-2. Support of Dynamic ip address
- If you want to use dynamic ip, please setup DDNS Setup in page 36.
- Use 3030 port for fort fording.
------------------------------------------User’s Manual NBCard V.3.0.3
-33-
Chapter 9. REMOTE SOFTWARE
9-2. Web Browser
You can connect to main DVR by Web Browser (Internet Explorer).
1) Open the Internet Explorer.
2) Type the ip address or domain name of the main DVR which you
want to connect in the address bar.
3) If you connect to main DVR for the first time in the remote PC,
security warning will appear as below.
Click Yes and wait to download the necessary programs from main DVR.
4) After download finished, network screen appears as below.
Type the correct ID/Password registered in main DVR, then same images
of the main DVR will display.
- If you use port forwarding (IP sharer, etc,.), use port number.
- If you do not use port forwarding, default port number is 3040.
------------------------------------------User’s Manual NBCard V.3.0.3
-34-
Chapter 9. REMOTE SOFTWARE
9-3. Remote site software
9-3-1. Installation
-Free remote site software is included with the this DVR to provide remote
site viewing of live and backup images. The software is compatible with
Windows 98SE/ME and Windows 2000/XP.
-You can also connect multi remote viewing and backup in one remote site.
To install the remote users software:
1) Start Windows 98SE/ME or Windows 2000/XP.
2) Close all programs, including any anti-virus programs.
3) Insert the CQONE CD into the CD-ROM drive.
4) The Windows Setup wizard starts. Follow the instructions that appear.
5) The software installation program appears.
a. Install Microsoft Direct X 8.0 over.
b. Install the Remote Client program (DvrRemote.exe)
6) Restart the computer.
<Remote User Software Installation Process>
!IMPORTANT: Screen setup for the Remote User Software:
– 24 or higher (recommend 32 bit)
– Resolution 1024 x 768
------------------------------------------User’s Manual NBCard V.3.0.3
-35-
Chapter 9. REMOTE SOFTWARE
9-3. Remote site software
9-3-2. Remote site Screen and Functions
If you click the DvrRemote.exe, remote site screen will appears as below.
11
1
2
3
4
5
10
9
8
7
6
1. Date and Time Indicator – Displays current date and time.
2. Setting Button : Server address registration or monitoring group selection button
3. Surveillance Button : Network connect button
4. Search Button : Remote search or Backup Button
5. Remote PTZ Control door – Control pan, tilt, and zoom functions.
Door open>>>
6. Audio buttons
7. 1 camera select buttons
8. Image enlarge/shrink buttons
9. Screen division select and screen rotation buttons
10. Power - Close the remote software.
11. X : Same as power off
: Conceal the remote program (for another pc work)
------------------------------------------User’s Manual NBCard V.3.0.3
-36-
Chapter 9. REMOTE SOFTWARE
9-3. Remote site software
9-3-3. Remote Site Setup
You need to set up several information before you use remote site program.
Ex) IP address of DVR which you want to connect to your remote site screen, etc
: Remote site setup Button
- If you click this button, setup screen will appears as below.
------------------------------------------User’s Manual NBCard V.3.0.3
-37-
Chapter 9. REMOTE SOFTWARE
9-3. Remote site software
9-3-3. Remote Site Setup
9-3-3-1. System setup
1
2
3
4
1. rotation interval : Select the time interval in second of the screen rotation.
2. date format : Select the display type of current date and time.
3. select language : Select the language which you want.
4. Audio : Select the audio play channel in multi channel remote monitoring.
------------------------------------------User’s Manual NBCard V.3.0.3
-38-
Chapter 9. REMOTE SOFTWARE
9-3. Remote site software
9-3-3. Remote Site Setup
9-3-3-2. Main (Server) DVR address setup
IF you want to connect server DVR in remote place, first you need to
register the server DVR ip address or telephone number in this window
3
1
2
4
1. Type the necessary server information you want to connect in 1,
and click add button in 2.
Registered server DVR information will display in window 3.
 You can register multi server DVR by repeat same steps.
2. Use add, delete, modify button to modify the server DVR information.
2. If you registered all server DVR address you want to connect, you must to
click apply button in 4.
4. Click “Group” tab, and follow the next step explain in next page.
1) Main name : Server DVR name you want to connect.
2) ID/PW : ID/Password must to matched registered in server DVR.
3) IP : IP address or domain name of the server DVR
4) Port : It used in firewall system work.
(If you do not use firewall, simply type 3040.)
5) TEL : Telephone number of server DVR
------------------------------------------User’s Manual NBCard V.3.0.3
-39-
Chapter 9. REMOTE SOFTWARE
9-3. Remote site software
9-3-3. Remote Site Setup
9-3-3-3. Group (Monitoring Group) Setup
After you registered server DVR information in “Main”, you need to register
the monitoring group.
- You can monitoring multi server DVR in one remote place.
- You can connect 16 channels in one group and can make up to 100 groups.
2
3
1
4
5
1. Type the Group Name in 1 and click New Group in 4.
Then group name will created in window in 2 which you typed.
- You can create multi group name and you can register 16 channels
in one group.
2. After you create the group name, you need to match the server DVR
channels connect to remote group channel.
- Remote channel : Channel number display in remote screen
- Main name : Select Server DVR name which you registered in Main will display.
- Main channel : Sever DVR channel number to display in remote
screen defined in remote channel.
 You need to repeat same steps in each channels.
1) Use buttons in 4 to modify the each setup.
2) After you setup all group, you must click apply button.
------------------------------------------User’s Manual NBCard V.3.0.3
-40-
Chapter 9. REMOTE SOFTWARE
9-3. Remote site software
9-3-3. Remote Site Setup
9-3-3-4. System Information
It displays the information of your PC installed our network program.
- Hardware and software information.
------------------------------------------User’s Manual NBCard V.3.0.3
-41-
Chapter 9. REMOTE SOFTWARE
9-3. Remote site software
9-3-4. Remote Site Search and Backup
: Remote site search and backup button
If you click this button, remote search screen will appears as below.
1
2
3
4
5
6
7
8
12
9
13
11
10
1. Index Search Buttons : Continuous, Motion, Sensor, Motion&Sensor
2. Screen Division Buttons
3. One camera select Buttons
4. Image enlarge/shrink Buttons
5. Playback Buttons(Play, Reverse play, Frame advance etc,.)
6. Panorama Buttons : It help you to find exact scene you find.
7. -Speed control Button : 0.5X-10X
-Skip Button : Play fast by skip the image
-Brightness Button : Control the brightness of the image
-Audio volume Buttons
8. Backup, Print, Refresh, Bookmark Buttons
9. Calendar Button – Displays calendar with recording days highlighted.
10. Quick minute search Button
11. Channel selection scroll
12. Recording status lines
RED : continuous recording status.
BLUE : motion detection recording status
YELLOW : sensor input recording status
No Line : no recording status
13. Exit Button : Exit to remote display mode
------------------------------------------User’s Manual NBCard V.3.0.3
-42-
Chapter 10. DvrPlayer
10-1. Installation
The DvrPlayer Software is a video player that enable user search and playback the
video data stored in various back-up devices.
Windows Media Player is a compatible software to playback backup files, however,
the DvrPlayer software features more detailed search and playback function.
To install the DvrPlayer :
1. Close all programs, including any anti-virus programs of your PC.
2. Insert CD into the CD-ROM drive.
3. Install DvrPlayer.exe in your PC.
After install the DvrPlayer, DvrPlayer icon created on desktop of your PC
DvrPlayer icon
4. Restart the computer.
DvrPlayer images :
02CH Parking Lot
Camera
Identification
07-18-2003 03:10:10:123
Recording time
Indicator
File name or
Play speed rate
------------------------------------------User’s Manual NBCard V.3.0.3
Play progress rate
and progressive bar
-43-
Chapter 10. DvrPlayer
10-2. Detail descriptions of tool bar (Quick control)
Tool bar
File open
Saving present still image
Play
Frame advance : 1 frame advance at pause status
Pause
Stop : End the present playback file
Full screen
------------------------------------------User’s Manual NBCard V.3.0.3
-44-
Chapter 10. DvrPlayer
10-3. Detail descriptions of menu
 File : Open/Close the files
-Open new file
-Close the present playback file
-Exit : Off the DvrPlayer
 Play : Control the Play/Stop/Sound etc.
-Pause/Play( Hot key : P)
-Stop (Hotkey : S)
-Mute (Hotkey : M)
-1 Frame advance (Hotkey : Space bar)
 Speed : Control the playback speed
-Increase (Hotkey : Right arrow)
-Decrease (Hotkey : Left arrow)
-Direct speed control : X1, X1/2, X1
 Window : Adjust the window size
-Half size (Hotkey : H)
-Double size (Hotkey : D)
-Full screen (Hotkey : F or Enter key)
-etc
 Option : authentification (watermark)
 Help : Display the DvrPlayer version
------------------------------------------User’s Manual NBCard V.3.0.3
-45-
MEMO :
------------------------------------------User’s Manual NBCard V.3.0.3
-46-