Transcript Presentation

Are you confident with support brackets?
Präsentation
Take a few minutes time and check your knowledge with 10 questions.
Musterüberschrift
1
A Stabil D-3G clamp is based on the idea that good engineering
is safer than thick material. An 8" (219mm) clamp is designed
for a load capacity that corresponds with:
A
Sikla United Kingdom
Aberdeen angus cattle
B
An empty BAE Avro Jet
C
A BMW Mini Cooper
Slide 2
2
This arrow appears on Slide Sets, also known as ‘Pipe Guides’.
What does it indicate?
A
Sikla United Kingdom
The heating’s flow direction
B
Downwards in a riser
C
Expands in this direction
Slide 3
3
A Fixed Point Clamp is supposed to keep high expansion
forces at bay, ideally without the need of welded blockers.
What are the ‘Spring Inserts’ for (red indication)?
A
Sikla United Kingdom
To achieve full friction force
B
Forcing bolts in accurate position
C
Avoiding lose parts in transport
Slide 4
4
The internal strut-channel coupling ‘Connector SK’ helps to
create sections longer than the standard length of 6m.
This does work…
A
Sikla United Kingdom
only with Sikla channel but it creates a weak point
B
with most 41/41 channel, no weak point
C
with additional bracing only.
Slide 5
5
How long does it take to fit and fix this angle bracket into the
corner of any two strut channels ?
Sikla United Kingdom
A
Less than 10 seconds
B
Less than 2 minutes
C
Less than 1 minute.
Slide 6
6
What can be securely installed with a TCS1 beam clamp
without any additional parts involved?
Sikla United Kingdom
A
Pipe clamps with metric boss
B
41mm strut channel sections
C
Flat steel members.
Slide 7
7
Many applications where 41/41 strut is used are colloquially
called an ‘overkill’. The CC27 system is an alternative to 41/41
of which one meter weighs the equivalent of a ‘multi-pack’ beer.
How much weight is a 27/27 channel?
A
Sikla United Kingdom
Like a Saturday’s newspaper
B
Like a mobile phone
C
Like a chocolate bar
Slide 8
8
When a Framo Cantilever has been fixed to a Framo section,
how many more Cantilever can be fitted at the very same level?
A
Sikla United Kingdom
Another one by through-bolts
B
No further one due to clashes
of fixings inside the box.
C
Another 3 is no problem.
Slide 9
9
Why are standard bracketry products always galvanised,
even when the majority is used indoors?
A
Sikla United Kingdom
A paint layer would not sustain indoors.
B
It is the most economic solution.
C
It just looks nice.
Slide 10
10
Why do some pipe clamps have a rubber lining?
A
Sikla United Kingdom
To separate materials, e.g copper.
B
To protect sensitive pipe surfaces.
C
To absorb sound transmission.
Slide 11
Thanks for testing your knowledge.
E-mail [email protected] subject ‘Test Key’ and the correct answers will be e-mailed back to you.
Sikla United Kingdom
Slide 12