Transcript Diapositive 1

This is a photographic template – your
photograph should fit precisely within this rectangle.
Eaton 5130 Sales Training
Carl Walker
Product Manager
Presentation Release Date:
September 1, 2008
© 2008 Eaton Corporation. All rights reserved.
Eaton 5130 - Market segments
Part of the Powerware® series, this small, power
dense, highly configurable UPS is designed for
mission critical applications.
• IT and Networking equipment:
• Network devices (routers, switches, etc..)
• Rackmounted and tower servers
• Wireless devices
• Storage systems (NAS, SAN)
• Security systems
• Telecom equipment:
• PBX
• VoIP (IP Phones, etc…)
• EDGE/3G/WiMAX equipment
2
2
Key Differences vs the Powerware 5125 RM
• Eaton® 5130 R/T replaces the Powerware
5125 RM
•
•
•
•
•
•
•
•
More Watts (pf=> 0.9) vs. the 5125 1000 & 1500
New 3U Short Depth 5130 3000
Compatible with HotSwap MBP & FlexPDU
USB, Serial and Comm. Option slot on rear deck
Rail Kit and mounting hardware included
Automatic EBM detection
RPO or ROO feature
No removable electronics module
3
3
5130 competitive comparison
Eaton
5130
APC
Smart
APC
Smart XL
Liebert
PSI2
Riello
Dialog
Vision
Socomec
Netys
Yes
Yes
Yes
No
No
No
Yes
No
Yes
Yes
No
Yes
2U
2U
3U
2U
2U
2U
Up to 3kVA
Only up to
1.5kVA
Only up to
1.5kVA
Only up to
1.5kVA
No
Only up to
2kVA
Yes
No
No
No
Yes
No
0.9 Power Factor
High 0.9 output power factor enables this UPS
to provide its full power capability to modern IT
equipment that may have a wide range of
leading and lagging power factors.
Extended runtimes for all models
You can buy a standard unit and if you need
more backup time due to more load attached
you can add battery capacity later on.
Optimized product density
Save space in rack to increase power density
or improve heat dissipation.
Compatibility with 600mm racks
Fits in every environment even with telecom
racks
Load Segments
Divides UPS into virtual UPSs with separate
receptacle groups; each can be programmed
with individual shutdown and start-up
schedules, thus preserving battery power for
the most critical equipment.
4
4
5130: Design Benefits
Panel for replacing batteries without interrupting the
output
1
1)
Full user interface:
2
•
•
•
•
On/off button for UPS and outlets
Load protected / not protected LED
Utilized power level / battery charge level
Status of switchable outlets
1
3
Communication card slot
4
USB and Serial ports, RPO/ROO
5
EBM units recognized automatically
6
EBM battery unit connector
7
8 IEC10A, including two groups of two programmable receptacles
3
4
2
6
7
5
5
5
5130: Design Benefits
Form factors available for easy integration
Rack/Tower versatile
1250 & 1750 compatible with 600 mm racks
2500 & 3000 2U compatible with 800 mm racks
3000 3U compatible with 600 mm racks
Hot Swap Batteries
Achieves maximum uptime by
allowing users to safely install a new
battery without ever powering down
the connected server and server
options or having to remove the unit
from the rack
Eaton 5130 compact U size is ideal for making
the most use of available rack space.
Mounting Rail Kits Provided
Rack kits are included in the shipping
package at no additional cost
6
6
5130: Design Benefits
Tower, Rack, & Rack/Tower
Bar graph LED indicates
% load
Load segment 1 LED
indicates power on/off.
ON/OFF outlet power push
button.
Alert LED, unprotected load, fault
condition
Alert LED, on battery operation
Bar graph LED indicates
% battery charge
Load segment 2 LED
indicates power on/off.
UPS on, power present.
Informative UPS status that’s easily readable vertically or horizontally
7
7
5130: Design Benefits
Extended Runtime
With Up To 4 EBM
PW 5130 R/T EBM :
•2U short depth for
Eaton 5130 1250/1750
•3U short depth or 2U long
for Eaton 5130 2500/3000
Runtime
at 75%
of rated
(Pf 0.9)
UPS
+
1 EBM
+
2 EBM
1250
7 min
42 min
78 min
1750
6 min
24 min
2500
6 min
3000
6 min
+
3 EBM
+
4 EBM
114 min
150 min
43 min
60 min
80 min
31 min
60 min
90 min
120 min
25 min
47 min
69 min
91 min
8
8
5130: Accessories & Options
Racks and Enclosures: Internal, welded frame with repetitive hold
pattern delivers high load bearing capacity and additional mounting
locations
FlexPDU/HotSwapMBP: Integration on all Rack/Tower UPSs for the
convenient addition of receptacles or hot-swappable UPS
functionality.
Rack Mount PDUs: Effectively distribute UPS power throughout a rack
environment while organizing power cords. These units (rack-, wall- or
floor-mounted) support a selection of NEMA, IEC and hardwired inputs and
up to 12 NEMA/IEC output receptacles.
Maintenance Bypass: Add a hot-swappability function to your UPS by
adding a HotSwapMBP maintenance bypass switch. Perform any
maintenance or UPS upgrade without ever losing power to the connected
equipment.
Optional Connectivity Cards: Web/SNMP devices allow you to
connect your Powerware UPS directly to the Ethernet network and
the Internet, to conveniently monitor and manage your UPS with a
standard Web browser, while simultaneously providing graceful
shutdown for multiple computer systems over the network.
Extended Battery Modules (EBM): Add up to 4 EBMs to provide
extended runtimes of up to 4 hours for critical equipment.
9
9
LanSafe Software
Toolbar Buttons
Quick-launch most
common tasks
LanSafe® Controller
Name, Location and UPS
Model
Animated UPS
Topology Display
Input Voltage Meter
Output Voltage Meter
Battery Runtime
Amount of time the
UPS can operate on
battery power
Load Percent
The percent of maximum
output load the UPS
supports. The number
increases when new
devices are plugged into
the UPS
Active
Events Log
10
10
5130 Product Selection Guide
Power Rating
(VA / Watt)
Input
Connection
Output
Receptacles
Dimensions
H x W x D (mm)
Weight
(kg)
PW5130i1250-XL2U
1250 / 1150
IEC C14-10A
(8) IEC-C13-10A (C13)
86.2 x 441 x 509
24.3
103006590-6591
PW5130i1750-XL2U
1750 / 1600
IEC C14-10A
(8) IEC-C13-10A (C13)
86.2 x 441 x 509
26.6
103006591-6591
PW5130i2500-XL2U
2500 / 2250
IEC C20-16A
(1) IEC-C19 16A
(8) IEC-C13 10A
86.2 x 441 x 634
33.8
103006592-6591
PW5130i3000-XL2U
3000 / 2700
IEC C20-16A
(1) IEC-C19 16A
(8) IEC-C13 10A
86.2 x 441 x 634
33.8
103006593-6591
PW5130i3000-XL3U
3000 / 2700
IEC C20-16A
(1) IEC-C19 16A
(8) IEC-C13 10A
130.7 x 441 x 484
34.3
103006594-6591
Catalog Number
Style
Number
Optional Extended Battery Modules (EBMs)
PW5130N1750-EBM2U
n/a
Standard Connector
n/a
86.2 x 441 x 509
30.4
103006587-6591
PW5130N3000-EBM3U
n/a
Standard Connector
n/a
130.7 x 441 x 484
41.7
103006588-6591
PW5130N3000-EBM2U
n/a
Standard Connector
n/a
86.2 x 441 x 634
41.7
103006589-6591
11
11
5130 Technical Specifications
 Power >0.9 for entire offering
 Adjustable input voltage range
 Load control
 Rear deck USB and RS 232
 Communication slot option
 Eaton Software Suite CD
General
LEDs
13 status-indicating LEDs
Topology
Line interactive
Diagnostics
Full system self-test at power up
Transfer Time
1–4 ms typical
ROO/RPO
Rear deck emergency stop connector (for remote on/off – remote power off)
Rail Kit/Tower Stand
Included with all units
Electrical Input
Nominal Voltage
230 Vac
Voltage Range
150–294V
Frequency
50/60 Hz
Frequency Range
47–70 Hz for 50 Hz operation
56.5–70 Hz for 60 Hz operation
12
12
5130 Technical Specifications
Electrical Output
Power Factor
0.9
On Utility Voltage Regulation
184–265 Vac
On Battery Voltage Regulation
-10%, +6% of nominal
Efficiency
Online: 94%
On battery: 70% (1250–1750 VA), 75% (2500–3000 VA)
Frequency Regulation
0.1 Hz
Over Current Protection
Electronic current limit
Load Crest Factor
3:1
Load Segment Control
Two individually controlled output receptacles
Battery
Internal Battery Type
1250/2500 VA: 12V/7.2 Ah; sealed, lead-acid; maintenance free
1750/3000 VA: 12V/9 Ah; sealed, lead-acid; maintenance free
EBM Battery Type
12V/9 Ah
Battery Runtime
1250 VA: 5 min w/ internal batteries @100% load (0.9 PF)
1750 VA: 3.5 min w/internal batteries @100% load (0.9 PF)
2500–3000 VA: 3 min w/ internal batteries @100% load (0.9 PF)
Battery Replacement
Hot-swappable internal batteries
Start-On-Battery
Allows start of UPS without utility input
13
13
5130 Technical Specifications
Communications
Serial Port
RS232 (RJ45) ports
USB Port
As standard (HID)
Optional Communications Slots
ConnectUPS-MS network management card and ModBus
Cables
RS232 and USB communications cables included
Power Management Software
Eaton Software Suite CD-ROM (bundled with UPS)
Environmental
Safety Markings
CE; TUVus; C-Tick
Safety Conformance
IEC/EN 62040-1-1, UL 1778
EMC Compliance
IEC/EN 62040-2 EN 50091-2 class B
Operating Temperature
0˚C to +40˚C
Storage Temperature
-15˚C to +50˚C
Relative Humidity
20–95% non-condensing
Audible Noise
Max 45 dBA
Altitude
Up to 10,000 ft (3000M) without de-rating
14
14
5130 Summary
Unmatched flexibility in a power-dense, configurable, UPS designed for critical systems.
Maximizes availability and uptime
 Flexibility—FlexPDU and hot-swap MBP options extend UPS connectability by sockets or terminal blocks and can be
installed as required behind, on the side or on top of the UPS
 Extended run capability—Extends application uptime with up to four additional battery modules
 Hot-swap battery—Ensures increased up time and reduced service utilization through battery module replacement
without load interruption
Minimizes total cost of ownership (TCO)
 Power density—Power factor load compatible with 0.9 or greater provides more power
per U of rack space
 Line-interactive HF technology — Allowing high product density
& providing the best price/performance ratio.
 Included mounting hardware—Rail kits and hardware provided at no additional cost
Maximizes manageability and utilization
• Rack/tower configurations—Available in tower and R/T 2U (standard racks) or 3U (short-depth racks)
• Flexible communications interface—Rear deck resident USB and serial ports (R/T models); remote start/stop
connection capability
 Optional communications slot—Allows customizable communications with free state of the art LanSafe monitoring &
shut down software
 Load segments—PowerShare receptacles provide programmable control of output load receptacles
15
15
16
16