Transcript Server Management - Sydney Region School ICT Website

Interactive
Whiteboards
Sanyo Data
Projectors
Sanyo Data Projectors
Overview
•General Functions
• Resetting lamp counter
Input Source Selector
• Cleaning the filter
Auto-PC adjustment
• Resetting filter counter
Powering off projector
• General troubleshooting
Sanyo Data Projectors
General Functions
Input Source Selector
Computer 1 is currently the
default input used when a
laptop is connected.
Computer 2 is used to display
to the LCD monitor.
Video input accepts signals
via one of three video ports
Sanyo Data Projectors
General Functions
Auto-PC Adjustment
This function automatically
adjusts the vertical and
horizontal position to line up
with that of the computer.
The Auto-PC adjustment can
be used to correct the
alignment when changing
between different computers.
Sanyo Data Projectors
General Functions
Powering off projector
To correctly power off the projector, press the power
button on the remote twice.
The power indicator will begin to flash red and will
continue until the projector has powered down.
Sanyo Data Projectors
Replacing the lamp
The projector lamp will need
replacing when the “Lamp
Replace” light begins to flash.
The “Lamp Replacement”
icon will also appear on the
screen
Sanyo Data Projectors
Cleaning the filter
Filter Latches.
The filter installed in the
projector will need to be clean at
an interval of 200 hours.
Simply place a flat-head
screwdriver in the filter latches
and gently lift up.
Remove and clean the dust from
the filter. Replace filter.
Sanyo Data Projectors
Cleaning the filter
Sanyo Data Projectors
Resetting filter counter
When the filter has been cleaned, the filter counter
must be reset.
It is recommended that the filter be cleaned and
reset monthly.
Sanyo Data Projectors
General Troubleshooting
Projector is on but only
displays a blue screen.
Check computer VGA
cable is connected. Press
the computer input source.
The warning light is
flashing
Check the filter counter.
Clean filter.
Lamp Replace indicator
light is flashing yellow
Replace lamp and reset
counter