www.codedataplate.com
Download
Report
Transcript www.codedataplate.com
Code Data Plates
a tool for inspectors
by: John S. Rearick
CodeDataPlate.com
Introduction
HISTORY
• A17.1-1996 - 1200.6 Effective April 1, 1999
• A17-1-2000 - Sect. 8.9 Effective April 1, 2002
–
–
–
–
To be used for Inspections & Tests - 8.10.1.2
Also see A17.2 - Item 10.14
Maintenance 8.6.1.5
Alterations 8.7.1.8
• All new, modernized and existing equipment are
required to have a Code Data Plate
Ohio Standard Plates
• All Adopted Code Editions
CODE DATA PLATE
INSTALLATION CODE:
ASME A17.1-2004
codedataplate.com
CODE DATA PLATE
INSTALLATION CODE:
ASME/ANSI A17.1b-1989
codedataplate.com
CODE DATA PLATE
INSTALLATION CODE:
Bulletin 110
codedataplate.com
start
3/1/2005
11/30/2003
10/4/2002
04/01/02
08/20/99
04/01/99
08/01/96
07/01/95
05/15/95
06/30/93
08/29/92
01/01/92
07/01/89
07/01/84
08/15/80
09/10/79
04/01/74
1/1/1800
end
code edition
02/28/05
11/29/03
10/03/02
03/31/02
08/19/99
03/31/99
07/31/96
06/30/95
05/14/95
06/29/93
08/28/92
12/31/91
06/30/89
06/30/84
08/14/80
09/09/79
03/31/74
ASME A17.1-2004
ASME A17.1b-2003
ASME A17.1a-2002
ASME A17.1-2000
ASME A17.1b-1998
ASME A17.1a-1997
ASME A17.1b-1995
ASME A17.1a-1994
ASME A17.1-1993
ASME A17.1b-1992
ASME A17.1a-1991
ASME A17.1-1990
ASME/ANSI A17.1b-1989
ANSI/ASME A17.1b-1983
ANSI A17.1b-1980
ANSI A17.1a-1979
ANSI A17.1b-1973
Bulletin 110
Ohio
Code Year
• Original Installation Date
– Elevator Permit Date
– Other Dates If Unknown
• Original Installation Code
– “Red Book” Bulletin 110 Pre-1974
– Ohio Adoption Dates after 4/1/1974
Equipment Without Alteration
• All Pre-1974 Installations
– Bulletin 110 Standard Plate
• 4/1/1974 to 9/9/1979
– ANSI A17b-1973 Standard Plate
• 9/10/1979 through 2/28/05
– Appropriate Standard Plate
• 3/1/2005
– ASME A17.1-2004 Standard Plate
Custom Plates
• Alterations Under A17.1-1996 Edition
CODE DATA PLATE
INSTALLATION CODE:
ALTERATION CODE:
ANSI A17.1-1978
ASME A17.1a-1994
PART XII RULES COMPLIED WITH:
#REF!
1201.11, 1202.13.
codedataplate.com
• Alterations Under A17.1-2000 Edition
CODE DATA PLATE
INSTALLATION CODE:
ANSI A17.1-1978
ALTERATION CODE:
ASME A17.1-2000
SECT. 8.7 REQUIREMENTS COMPLIED WITH:
#REF!
8.7.2.11.5, 8.7.2.28.
codedataplate.com
Alteration Plate
Door Operator
Plunger Gripper
CODE DATA PLATE
Wiring
INSTALLATION CODE:
Re-opening
Devise
Door Restrictor
ALTERATION CODE:
Bulletin 110
ASME A17.1-2004
SECT. 8.7 REQUIREMENTS COMPLIED WITH:
#REF!
8.7.2.11.5, 8.7.2.13, 8.7.3.8, 8.7.3.12, 8.7.3.23.7, 8.7.3.24, 8.7.3.29,
8.7.3.30, 8.7.3.31.1, 8.7.3.31.2, 8.7.3.31.5, 8.7.3.31.8
codedataplate.com
Limits
Controller Replacement
Top of Car Insp..
Emergency Operations
Leveling
Valve
Tank
Website
www.codedataplate.com
• Home Page
• Standard Page
– Order by Permit Date and AHJ
– Order by Code Edition
• Custom Page
– Traction Choices
– Hydro Choices
• Contact Page
The Process
• Orders from Building Owners & Managers
– Verification of information required
– Provide mounting information
– Must pay Ohio Sales Tax
• Orders from Elevator Professionals
–
–
–
–
Link to special professionals order page
E-mail or fax custom order forms
Established vendor with all majors
Returning customer check box
Code Data Plate Order Form
Company:__________________________________________________________________________
Address:___________________________________________________________________________
City:_________________________________
State:____________
Zip: ____________________
Phone:_______________________________
Fax:______________________________________
Contact:______________________________
P.O. No.:__________________________________
e-mail: _____________________________________________________________________________
Type of Plates and Equipment on this sheet:
Shipping Instructions:
Quantity:_____________________
_______________________________________
Mounting method for plates:
New Installation
Modernization
Maintenance
Other
Type:
Traction
Hydro
Esc/MW
4 Holes
Double faced tape
Both
None
Local Inspection Authority (AHJ):__________________________________________________________
New Installations or Modernizations Only:
Installation/Alteration Date:_________________________________________________
Modernizations or Maintenance Only:
Original Installation Date: __________________________________________________
Code Data Plate Order Form
Modernization Items - check those that apply and provide additional in blanks:
Alteration to Hoistway:
Ascending Car/unintended Movement Protection
Hoistway Ventilation
Change in Number of Ropes
Mach. Room Access:
Addition of Rope Equalizers
Mach. Rm. Alteration:
Addition of Auxiliary Rope-Fastening Devices
Replace or alter Wiring
Alteration to cwt:
Horizontal Slide Entrance(s) added
Installation of or Alteration to Cwt. Roller Guides
Vertical Bi-Parting Entrance(s)
Alteration to Car or Cwt. Buffers or Bumpers
Tracks and/or Hangers Replaced
Alteration of Guide Rails, Supports and Fastenings
Interlocks Replaced
Alteration to Machine, Motor or Sheaves
HW Access and/or Unlocking Device Alteration
Change in location of Driving Machine
Door restrictors added
Alteration to Terminal-Stopping Devices
Door Operator added or altered
Addition of or alteration to Top of Car Operating Device
Door Re-Opening devise added or altered
Addition of or alteration to Car leveling or Truck-Zoning Device
Complete New Cab
Change of Main Power Supply
Remodel Existing Cab:
Controller change
Alteration of Car Frame or Platform
Change in Type of Motion Control (AC, DC, VV, SCR, etc.)
Installation of or Alteration to Car Roller Guides
Change in Type of Operation Control (Car Sw., Automatic, etc.)
Increase/Decease Deadweight of Car more than 5%
Charge to Emergency Operations or Signaling devices
Change in Type of Service
Installation of new Hydraulic Jack
Change in Class of Loading
Install or alter Plunger
Change to carry Passengers on Freight elevator
Install, alter or sleeve Cylinder
Increase in Rated Load
Increase Working Pressure
Increase or Decrease Travel
Change location of Hydro Jack
Increase in Rated Speed
Relocation of Hydraulic Machine to below top of Cylinder
Decrease in Rated Speed
Installation of Plunger Gripper
Replace or install New Car Safety
Change to Valves, Pressure Piping & Fittings
Replace or install New Cwt. Safety
Install or alter Tank
Alter Existing Car or Cwt. Safety
Alter Anti-Creep Leveling device
Alter or install New Speed Governor
Install or alter Emergency Lowering
Other items modernized, comments or any additional Information:________________________________
____________________________________________________________________________________
Section 8.7
HYDRO
8.7.3.1
8.7.3.1
8.7.3.7
8.7.3.7
8.7.3.8
8.7.3.9
8.7.3.10
8.7.3.10
8.7.3.11
8.7.3.11
8.7.3.11
8.7.3.12
8.7.2.13
8.7.3.13
8.7.3.13
8.7.3.14
8.7.3.14
8.7.3.21
8.7.3.17
8.7.3.18
8.7.3.19
8.7.3.20
8.7.3.22.1
8.7.3.22.2
8.7.3.22.3
8.7.3.15.1
8.7.3.15.2
8.7.3.15.3
8.7.3.16
2000 Code Rules
TRACTION
HYDRO
8.7.2.1.__ Alteration to Hoistway: '.1=wall change, 2=add elev,.3=const @top, .4 =const @bottom8.7.2.20
8.7.2.1.5 Hoistway Ventilation
8.7.3.25.1
8.7.2.7.__ Mach. Room Access: .1=Enclosures, .2=Means of Access, .3=Doors or Openings 8.7.3.25.2
8.7.2.7.__ Mach. Rm. Alteration: '.4=Headroom, .5=Widows & Skylights, .6=Lighting, .7=Ventilation
8.7.2.21.3
8.7.2.8
8.7.3.26
Replace or alter Wiring
8.7.2.9
8.7.3.26
Alteration effecting structural support
8.7.2.10 Entrance(s) added
8.7.3.27
8.7.2.10.1 Tracks and/or Hangers Replaced
8.7.3.28
8.7.2.11.1 Interlocks Replaced
8.7.3.23
8.7.2.11.4 HW Access and/or Unlocking Device Alteration
8.7.3.23.5
8.7.2.11.5 Door Restrictors added
8.7.3.30
8.7.2.12 Door Operator added or altered
8.7.3.31.1
8.7.2.13 Door Re-Opening devise added or altered
8.7.3.31.2
8.7.2.14.1 Complete New Cab
8.7.3.31.4
8.7.2.14.__Remodel Existing Cab:.2=light,fan, exit, glass, .3=new panels, .5 removal of stop sw. 8.7.3.31.5
8.7.2.15.1 Alteration of Car Frame or Platform
8.7.3.31.6
8.7.2.15.1 Car Roller Guide Modification/not replacement
8.7.3.31.7
8.7.2.15.2 Increase/Decease Deadweight of Car more than 5%
8.7.3.31.8
8.7.2.16.1 Change in Type of Service
8.7.3.23.1
8.7.2.16.2 Change in Class of Loading
8.7.3.23.2
8.7.2.16.3 Change to carry Passengers on Freight elevator
8.7.3.23.3
8.7.2.16.4 Increase in Rated Load
8.7.3.23.4
8.7.2.17.1 Increase or Decrease Travel
8.7.3.23.5
8.7.2.17.2 Increase in Rated Speed
8.7.3.23.6
8.7.2.17.3 Decrease in Rated Speed
8.7.3.23.7
8.7.2.18.1 Replace or install New Car Safety
8.7.3.24
8.7.2.18.2 Replace or install New Cwt. Safety
8.7.3.29
8.7.2.18.3 Alter Existing Car or Cwt. Safety
8.7.3.31.3
8.7.2.19 Alter or install New Speed Governor
8.7.3.31.9
JOB:
TRACTION
8.7.2.20 Ascending Car/unintended Movement Protection
8.7.2.21.1 Change in Number of Ropes
8.7.2.21.2 Addition of Rope Equalizers
8.7.2.21.3 Addition of Auxiliary Rope-Fastening Devices
8.7.2.22.__Alteration to cwt:.1=cwt except guides, .2=rod type
8.7.2.22.3 Counterweight Roller Guide Modification/not replacement
8.7.2.23 Alteration to Car or Cwt. Buffers or Bumpers
8.7.2.24 Alteration of Guide Rails, Supports and Fastenings
8.7.2.25.1__
Alteration to Mach., Motor or Sheaves:a=Mach., b=Motor, c=susp.
8.7.2.25.2 Change in location of Driving Machine
8.7.2.26 Alteration to Terminal-Stopping Devices
8.7.2.27.1 Addition of or alteration to Top of Car Operating Device
8.7.2.27.2 Addition of or alteration to Car leveling or Truck-Zoning Device
8.7.2.27.3 Change of Main Power Supply
8.7.2.27.4 Controller change
8.7.2.27.5 Change in Type of Motion Control (AC, DC, VV, SCR, etc.)
8.7.2.27.6 Change in Type of Operation Control (Car Sw., Automatic, etc.)
8.7.2.28 Charge to Emergency Operations or Signaling devices
Installation of new Hydraulic Jack
Install or alter Plunger
Install, alter or sleeve Cylinder
Increase Working Pressure
Change location of Hydro Jack
Relocation of Hydraulic Machine
Installation of Plunger Gripper
Change to Valves, Pressure Piping & Fittings
Install or alter Tank
Alter Anti-Creep Leveling device
Install or alter Emergency Lowering
Internal Worksheet for Custom Plates
Order Filling
Custom Plates
Standard Plates
• Match Date to Edition
• Fill Order from Stock
• Ship & Invoice
•
•
•
•
•
Verify Alteration Data
Select Original Edition
Select Alteration Edition
Select Rules/Requirements
Prepare Template
– Approval, if necessary
• Fabricate
• Ship & Invoice
Custom Plates
• Added Information
– Company/Job ID/Car ID
– Other Compliance References
• RS-18 (NYC)
• NEC
• Building Code
CODE DATA PLATE
INSTALLATION CODE:
ALTERATION CODE:
ANSI/ASME A17.1-1984
ASME A17.1b-2003
SECTION 8.7 REQUIREMENTS COMPLIED WITH:
#REF!
8.7.3.8, 8.7.3.24, 8.7.3.29, 8.7.3.30,
8.7.3.31.5,
United Elevator Services Co.
8.7.3.31.8.
DTD-2569A
codedataplate.com
Custom Plates
• Modernizations
– How Deep Do We Go?
CODE DATA PLATE
INSTALLATION CODE:
ANSI A17.1e-1987
ALTERATION CODE:
ASME A17.1a-1994
PART XII RULES COMPLIED WITH:
#REF!
1201.3, 1201.10a, 1201.11a, 1201.11d, 1201.12, 1202.7,
1202.9a, 1202.11, 1202.12a, 1202.12b, 1202.12e. 1202.13.
codedataplate.com
– Table 1200 or Appendix “L”
Custom Plates
• Modernizations
– Multi-mod Plate
CODE DATA PLATE
INSTALLATION CODE: ANSI A17.1d-1970
ALTERATION CODE:
ANSI A17.1-1978
PART XI RULES COMPLIED WITH:
#REF!
1201.10a
ALTERATION CODE:
ASME A17.1-1993
PART XII RULES COMPLIED WITH:
#REF!
1201.11
codedataplate.com
Custom Plates
• Add-on Plates
CODE DATA PLATE
ALTERATION CODE:
ASME A17.1b-2003
SECT. 8.7 REQUIREMENTS COMPLIED WITH:
#REF!
8.7.2.12, 8.7.2.13, 8.7.2.14.3, 8.7.2.20, 8.7.2.27.5, 8.7.2.28.
codedataplate.com
Referencing in Rule 8.6.1.5.1
Does this rule mean that when a data
plate is added for equipment altered
under an earlier edition of the code
the Rule(s) listed shall be those of the
earlier edition or shall be those of this
edition?
CODE DATA PLATE
INSTALLATION CODE: ANSI A17.1d-1970
ALTERATION CODE:
ANSI A17.1-1978
PART XI RULES COMPLIED WITH:
#REF!
1201.10a
ALTERATION CODE:
ASME A17.1-1993
PART XII RULES COMPLIED WITH:
#REF!
1201.11
or
codedataplate.com
CODE DATA PLATE
INSTALLATION CODE: ANSI A17.1d-1970
ALTERATION CODE:
ANSI A17.1-1978
PART XI RULES COMPLIED WITH:
#REF!
1200.2t
ALTERATION CODE:
ASME A17.1-1993
PART XII RULES COMPLIED WITH:
#REF!
1201.11
codedataplate.com
Other Issues
•
•
•
•
Magic Marker Plates
Mounting Locations
TN 03-624
Crosshead Alteration Plate for Weight
Changes
• Governor Alteration Plate for Speed
Changes
Crosshead Alteration Plate
ALTERATION DATA
ADDED CAR WEIGHT:
206
POUNDS
COMPLETE CAR WEIGHT:
6906
POUNDS
RATED LOAD:
2500
INSTALLED:
Fujitec America, Inc. 2289 PE 2
9/12/03
Thank You