Transcript 欧州会議の目的、アウトプットに関して

NS1000 V3.0
- System Resource and Peripheral Incensement Rev1.1 31 July, 2013
1
Table of Contents
1. Overview
2. What is enhancement
3. How to program
2
Chapter 1
Overview
3
1. Overview
Solution
Selectable System capacity (flexibility configuration)
Features and Benefits >>
* Features New for V3
3 types of system capacity patterns
When you want to increase NT-phone capacity or H.323 capacity, you can change
the system capacity on customer demand.
NS1000 supports TDA100D via Stacking card.
TDA100D is added for Legacy Gateway of NS1000.
4
1. Overview
NS1000 adds new 2 types of system capacity patterns.
System capacity can be selectable based on customer demand.
Type-1: Standard Type (same as version 1.x & 2.x)
Same as current System resource.
This type will be used for the user who satisfy current system
configuration.
Type-2: IP Extension Type
Increase number of IP terminal and decrease number of SIP terminal
This type may be used for the user who want to increase NT phone.
Type-3: System Resource Type
Increase Tenant and H323 expanding
This type may be used for the user who want to increase more
Tennant and/or Q-Sig node
Note: This selection must be set when proceeding Easy Setup Wizard
TDA100D Cabinet can be Legacy GW for NS1000.
Add supported optional cards for Legacy GW.
5
Chapter 2
What is enhancement
6
2-1 Selectable System capacity
Selectable Extension capacity
When select Type2 mode, IP-PT extension capacity will be increased up to 640.
In Type3 mode, SIP extension capacity will be changed.
Type
Type1
Extension Capacity
IP-PT (KX-NT series)
SIP
SIP Phone
KX-UT series
Type 2
Extension Capacity
IP-PT (KX-NT series)
SIP
SIP Phone
KX-UT series
Type 3
Extension Capacity
IP-PT (KX-NT series)
SIP
SIP Phone
KX-UT series
Stand alone
One Look
640
256
640
640
640
1000
1000
1000
1000
1000
640
640
256
256
256
1000
1000
1000
1000
1000
640
256
384
384
384
1000
1000
1000
1000
1000
7
2-1 Selectable System capacity
Selectable IP-GW Capacity
When select Type3 mode, IP-GW (H323) capacity will be increased up to 96
Type
Stand alone
One Look
H323
SIP
256
48
256
256
96
256
H323
SIP
256
48
256
256
96
256
H323
SIP
256
96
160
256
128
256
Type1
IP GW
Type2
IP GW
Type3
IP GW
8
2-1 Selectable System capacity
Selectable Tenant Group capacity
When select Type3 mode Tenant Group capacity will be increased up to 128
Type
Type1 - Tenant
Tenant Group
Time Table
System Speed Dial
Type2 - Tenant
Tenant Group
Time Table
System Speed Dial
Type3 - Tenant
Tenant Group
Time Table
System Speed Dial
Stand alone
One Look
32
32
32
32
1000/Tenant
1000/Tenant
32
32
32
32
1000/Tenant
1000/Tenant
128
128
128
128
300/Tenant
300/Tenant
9
2-1 Selectable System capacity
Increase COS and Carrier for each Unit
Other resources will be increased
Before (V1,V2)
After (V3)
ARS Carrier
48
128
No. of COS Group
64
512
Resource
Type1
96 unit
User Group COS 512, Carrier 128 per standalone
256
Type2
ARS Carrier
48
128
No. of COS Group
64
512
User Group
96
256
ARS Carrier
48
128
No. of COS Group
64
512
User Group
96
256
Type3
10
2-2 Add TDA100D as Legacy GW
Legacy Gateway by KX-TDA100D
Cabinet of KX-TDA100D can be used as Legacy Gateway to expand legacy trunks
and phones. NS1000 can have stacking connection with TDA100D by changing
MPR card to STACK-S card in TDA100D same as TDE series (KX-NS0132).
Remove
MPR card
Insert
STACK-S card
TDA100D
Stack-S card S/W Version
should be 2.000 or later
KX-TDA100D is allowed to be set with another KX-TDA100D on a NS1000 as
Legacy Gateway.
TDA100D add as additional GW category.
- Category1:
- Category2:
- Category3:
- Category4:
NCP500 /NCP1000
TDE100/200, TDA100/200
TDE600/620, TDA600/620
TDA100D
11
2-2 Add TDA100D as Legacy GW
Legacy Gateway by KX-TDA100D
The maximum number of Legacy Trunk and Extension
Stand-alone
Main
Trunk(ch)
Stacking system
Main
256
Legacy
1NCP500
1NCP1000
1TDE/TDA100
1TDA100D
1TDE/TDA 200
1TDE/TDA 600
2NCP500
2NCP1000
2TDE/TDA 100
2TDA100D
2TDE/TDA 200
2TDE/TDA 600
256
One Look
Networking
600
30
0
64/64/120/120/128/160
128/128/240/240/256/256
600
LCOT
2
0
12/16/96/112/128/160
24/32/192/224/256/256
600
BRI
8
0
12/16/96/112/128/160
24/32/192/224/256/256
600
PRI23
23
0
46/46/92/92/92/115
92/92/184/184/184/230
600
PRI30
30
0
60/60/120/120/120/150
120/120/240/240/240/256
600
T1
0
0
48/48/96/96/96/120
96/96/192/192/192/240
600
E1
0
0
60/60/120/120/120/150
120/120/240/240/240/256
600
2
0
640
44/44/128/120/168/240
88/88/256/240/336/480
1000
SLT
2
0
36/36/96/120/128/240
72/72/192/240/336/480
1000
DPT
0
0
40/40/96/112/128/160
80/80/192/224/256/320
1000
Extension(ch)
Legacy*1
640
1000
*1 : The maximum number with DXDP
12
2-3 Add Optional cards
Optional cards for Legacy Gateway
Following cards are supported for Legacy Gateways
For TDE100/200, TDA100D
Model
Symbol
Description
KX-TDA1176
MCSLC16
16-Port Single Line Telephone Card with Message Lamp
Interface
KX-TDA1178
MCSLC24
24-Port Single Line Telephone Card with Message Lamp
Interface
For TDE600/620
Model
KX-TDA6179
Symbol
EMCSLC24
Description
24-Port Single Line Telephone Card with CID & Message
Lamp Interface
For TDA100D
Model
Symbol
Description
KX-TDA1180
CLCOT8
8-Port Analogue Trunk Card with CID
KX-TDA1186
CLCOT8E
8-Port Analogue Trunk with Caller ID daughter Card
13
Chapter 3
How to Program
14
3. Howe to Program
System Initialize > Easy Setup Wizard
It is necessary to select the type while proceeding Easy Setup Wizard,
when you want to change System Capacity Type.
System Capacity Type can’t be changed while system running unless initialize NS1000.
Note: You can not select System Capacity Type when you upgrade
software from Version 2 to Version 3 without Off-Line Tool.
15
END
16
Appendix
17
Appendix
System capacity
When you select type 2 or type 3 system capacity, V-SIPEXT capacity is
changed at each type.
Default : <Type 1> 20 cards (640 ports)
System Capacity Type 2
SIPEXT : 8 cards (256 ports)
System Capacity Type 3
SIPEXT : 12 cards (384 ports)
18
Modification
20130730-01 5 NS1000 V3.0 System Resource and Perifperal_Rev1.0_30Jul2013.pptx
- 1st release
20130731-01 Modified page 5 ‘overview’ and page 13 ‘Description for card’ .
- Revision 1.1
19