Transcript Structural Systems

SeaPerch Structural System
Structural Technology
• Technology of putting
mechanical parts and
materials together to
create supports,
containers, shelters,
connectors and
functional shapes.
What makes a structure?
• Supports a load.
• Resists various
forces.
• Holds elements
in a relative
position to other
parts.
What happened?
Standard PVC Frame Parts.
• Measure, mark, and cut the pieces as identified in the diagram.
Modified Structural System
• If you developed a modified structure, you will
need to determine the length of each piece of
PVC pipe.
• The pipe fits into the connector ¾”.
• This means that you will need to add 1 ½” to
the length of the pipe, if you have a connector
on both ends.
Create the drain holes.
• Secure the connector.
• Drill ¼” hole in each elbow.
Assemble the frame.
• Assemble the pipe pieces with the connectors.
• Do not glue the pieces together.
Assemble the floats.
• Use the H-bar to hold the 2 floats.
Mount the motors.
• Mount the motors to be able to move the ROV left,
right, up, and down.
• The angle may be adjusted by rotating the pipe
position, as the pipe is not glued.
Attach the netting.
• The netting will hold
weights (ballast) to
obtain neutral
buoyancy.