Transcript Objective - Dream Satellite

SATELLITE MIGRATION PROJECT
Contractor Orientation
2
SATELLITE FREQUENCY
Homecast
1. Press “menu”, select “installation” and
press “ok”.
2. Select “factory reset” and press “ok”.
3
SATELLITE FREQUENCY
Homecast
3. Enter the “access code”, default is
“1234”.
4. A prompt will appear, select “yes” and
press “ok”.
4
SATELLITE FREQUENCY
Homecast
5. Wait for the Dream Satellite TV Logo
to appear. Press “menu”, select
“installation” and press “ok”.
6. Go to “dish setup” and press “ok”.
5
SATELLITE FREQUENCY
Homecast
7. Enter “access code”, default is “1234”.
8. Under “transponder”, press “right
navigation key” on remote control.
6
SATELLITE FREQUENCY
Homecast
9. Select “new TS” and press “ok”.
10. Enter the following parameters:
a.
b.
c.
Frequency - 12390
Polarity
- Vertical
Symbol Rate - 25600
7
SATELLITE FREQUENCY
Homecast
11. Press “ok” twice. Under “installation”,
select “manual search” and press “ok”.
12. Select “frequency” and press “right
navigational key” on remote control.
Select the “new frequency” added and
press “ok”.
8
SATELLITE FREQUENCY
Homecast
13. Go to “network search” and press
“right navigational key” to “enable”
setting.
14. Press “ok” and a display will show “do
you want to save changes?”, select “yes”
and press “ok”.
9
SATELLITE FREQUENCY
Homecast
15. Press “exit” button.
16. Under installation. Repeat steps 6-15
but enter the frequency “12430” in
step 11.
17. Repeat steps 6-15 but enter the
frequency “12470” in step 11.
10
FORMS & FORMATS
JOB ORDER FORM
Control No.:
Installer Name :
Dealer :
Subscriber Name :
Subscriber Contact No. :
Address :
Items Replaced :
Low Noise Block (LNB) Converter
Others :
Antenna Dish
Bracket
RG-6 Cable
I certify that that the Out-Door-Unit (ODU) has been re-aligned/relocated and my unit is working properly.
Subscriber/Representative Name & Signature