Transcript Microteja - :: MILAGRO RUBBER COMPANY INC. :: Rubber, SBR

Microteja Plus ®
A State of the Art
Heat-Dissipating Coating
What is Microteja® Plus ?
Microteja Plus®
is a heat-dissipating coating.
surfaces exposed to sun.
It dramatically
reduces the temperature of
It has been formulated in part by:
High reflective pigments
Corrosion inhibitors
Kaolin particles and refractive ceramic microns with very low conductivity
Microteja Plus® uses these basic principals:
Reflectance and Refraction:
The composition of Microteja Plus® creates a snow-like whiteness (albedo 92%) that
reflects not allowing the roof surface to absorb solar radiation energy (UV and Infrared)
It also refracts the radiation that can not be reflected
Low Conductivity:
Due to its low conductivity, whatever small energy that is absorbed by the product, is not allowed to
pass on to the surface and it ends up being dissipated into the air
Microteja® Plus
Microteja Plus ® is a white paste that it is
applied like a paint and it has a satin look
finish
Microteja Plus ® applies over any surface
and is recommended not only for buildings, it
is very efficient on ducts, refrigerated rooms,
A/C and other type air systems, farms, and
others.
Heat Gain
In a typical sunny day, the surface of a building roof can reach up to 25ºC
higher temperature than the outside temperature.
The expansion and contraction of the roof caused by the temperature
fluctuations during the day and night, causes deterioration and defects on
the roof (cracks, seals disruption, joints separation, etc.). Microteja
minimizes theses effects.
The heat gain on the roof, contributes to the heat load of the inside of the
building in at least 70%, which makes the inside temperature to increase
considerably to the point that in some cases, is higher on the inside than on
the outside.
The experience of the benefits of Microteja, not only on Laboratory Testing,
but out in the field, have proven that Microteja reduces the temperature of
the inside of a building up to 10ºC in areas that are not air conditioned.
On air conditioned buildings, the energy savings obtained by the effects of
coating with Microteja, ranges between 10% and 20%.
Technical Data
Solids by Weight
Density
PH
Reflectance
Emittance
Resistance to UV
Ageing (Corrosion)
Viscosity
Ignition Temperature
Color
Resin
47.0 % +/- 2.0
1.25 +/- 0.10 Kg. / lt
8-9
0.86-0.90 ASTM C1549
0.89 ASTM C1371
3,300 hrs. ASTM G53
1,700 hrs. ASTM B-117
60 + - 10 sec
100 º C
White
Acrylic
*
Thickness of the finished product (applied) is 5 to 6 Thousands of an Inch
*
Depending on the weather conditions, the temperature delta of the surface can
go up to 20°C compared with one surface that was not coated with Microteja
Ceramic Paint
Liquid-Flexible Insulating Systems
These are basically acrylic paints loaded with ceramic microspheres that are used in walls and ceilings (outside and inside) to
help insulate a building, house or office.
This system helps to dissipate the outside heat and preserves a
more controlled temperature environment inside. It is recommended
to use only light colors.
Very easy to apply.
Microteja’s Ceramic Paint for inside and outside use, not only acts
as a very efficient insolating system, it also decorates and is 100%
washable.
It is as efficient as a 2” thick foam insulation at a lower cost, it does
not cracks or peals (very flexible) and it helps keeping humidity out.
DESIGN
Microteja Ceramic Paint is a mainly a combination of two acrylic
resins in emulsion, free of solvents that will air dry after applied.
It has been design with 3 ceramic components, one that reflects and
the other two make a bouncing and refracting effect to the heat
waves (natural and artificial). Due to its innovating design, the colors
do not fade with time, it is very flexible and resistant to the UV
radiation.
FUNCTION AND APPLICATION METHOD
Microteja Ceramic Paint contains ceramic components that reflects
solar radiation and refracts heat waves. It also forms microscopic air
and gas bubbles, which results in low conductivity. It is also very
hard and it sticks very firmly to any kind of surface.
It is easy applied with an airless system, a brush or with a roll.
A 5 gallon bucket yields 50 to 60 sq. meters with two coats,
depending on the kind of surface that is applied on.
Clean the surface thoroughly and make sure it is dry before applying
the product. Apply two coats of the product. Do not apply when is
less than 13ºC outside. Two coats will warranty 5 years of insulation,
but as you add coats, the time of warranty will increase
proportionally.
Liquid Rubber Coating
Liquid Rubber Coating
Microteja Liquid Rubber Coating is a water proof system with ceramic
components. It is extremely elastic and reflective. It features a double
protection. It protects your roof against water leakage and also
dissipates heat, keeping the inside of the building cool and free of leaks.
It seals cracks and gaps on your roof and it is very durable.
Specially formulated with high performance latex and acrylics that adhere
strongly to any kind of surface. It can be applied with airless systems,
brush or roll. It does not require any other material for its application as
other water proof systems do (screens, sealants, etc.).
A 5 gallon bucket yields 50 to 60 sq. meters with two coats depending on
the type of surface and the time warranty is 5 years.
Its chemical and physical composition makes it a very efficient performer. It
is monolithic (presents no overlaps, joints, etc.) and it forms a one piece,
seamless membrane that protect and insulate your roof.
METHOD OF APPLICATION
WEATHER CONDITIONS
Make sure you have a window of at least 3 days free of rain to apply the
product and allow for it to air dry.
SURFACE PREPARATION
Make sure the surface is dry, clean and free of any prior coating or
protection that looks in bad condition.
CRITICAL AREAS
Apply Microteja Liquid Rubber straight out of the container with a medium
size brush over cracks or gaps and let it dry. On metal roofs, use a sealing
fabric on the areas that presents problems and apply Liquid Rubber over
the fabric and let it dry in order to get those areas repaired.
Then proceed to apply two coats of Liquid Rubber on the rest of the roof
surface and let it dry. Make sure you allow dry time between coats.
DO NOT ADD WATER OR ANY OTHER MATERIAL TO THE PRODUCT
ACRILATEX
Monolithic and Hermetic
Water Proof Membrane System
REFLECTIVE – SEAMLESS – STRONG ADHERANCE – TOUGH AND DURABLE – IT DOES NOT
CRACK – SOUND AND LIGHT WEIGHTED – LOW MAINTENANCE – WASHABLE – LOW
CONDUCTIVITY
METHOD OF APPLICATION
Thoroughly clean the surface with a water pressure machine. If not available, do it with
water, brushing a soft detergent and then rinse. At the very least, swipe and make
sure the surface is free of dust or grease.
If applying over a prior coating material, water proof system, etc., make sure to remove
all loose and deteriorated parts of that material and repair problematic areas.
Do not apply under 10ºC outside temperature or when raining. Give yourself a 2 day
minimum window rain free.
Proceed to apply the Acrilatex sealing fabric and glue. If doing a 5 year warranty installation,
dissolve the glue with water at a 1:1 ratio. If doing a 10 year installation, do not dissolve
glue.
For a 5 year warranty installation:
Once the sealing fabric and glue are applied, applied one coat of Microteja Acrilatex and one
coat of Microteja Acrilatex Ceramic loaded.
For a 10 year warranty installation:
Once you have done the 5 year installation, add on top of it two coats of Microteja Plus®
or two coats of Microteja Liquid Rubber.
METHOD OF APPLICATION
Applying sealing fabric and glue
Finished sealing fabric and glue
Applying Acrilatex
Finished Product
Technical Data
Color: White
Odor: Mild and Characteristic
Viscosity: 60 +/- 10
PH: 8.5 +/- 0.5
Solids by Weight: 47 +/- 2
Density: 1.25 +/- 0.1 (gms./cc.).
Elongation: Minimum 500%
Warranty: 5 and 10 years.
5 GALLON YIELD RATIOS IN OPTIMAL CONDITIONS:
Acrilatex = 35 SQ. METERS
Acrilatex with Ceramic = 30 SQ. METERS
Based on 1 COAT
STORAGE:
Make sure to keep the container properly sealed.
IT GIVES YOU COOL RESULTS
Microteja S.A. de C.V.
Baja California 406 Sur Col. Independencia
Monterrey, N.L. México 64720
PH. (81) 84788016 & 17
Fax. (81) 1365 5257
www.microteja.com
[email protected]