Transcript PowerPoint 프레젠테이션 - DAIVIETENVITECH .,JSC

INDUSTRY SPECIALITY CHEMICALS
PAPER CHEMICALS
WATER TREATMENT CHEMICALS
CHEMICAL RAW MATERIALS
INTRODUCTION
We have been developing specialty chemicals of various kinds that improve on a
quality of paper,textile,water since 2002.
We produce and distribute all kind of paper processing
chemicals and additives of coated paper, surfactant and chemical raw materials,
textile, water management chemicals.
And now we have many customers who are using our product in Korea and Asian
country.
For meeting of our customer’s requirement we will do our best in parts of the
developing products and the rigid quality control systems.
We will concentrate our efforts development of new products
and the best products.
PAPER CHEMICALS
PRODUCTS
Creping agent
Releasing agent
Wire Passivation/Felt
Conditioning
FEATURES
Increase sheet hand feel properties , Increase blade shelf-life
Tissue (Yankee Dryer)
Controlling Yankee Dryer release properties
Tissue (Yankee Dryer)
Reduce Downtime , Increase Quality,Improve Clothing shelf-life
Biocides
Reduce Downtime , Prevent the slime,Prevent the bacteria
Antifoam
Improve Quality , Increase Drainage, Improve runability
Scale control
Softner
APPLICATION
Prevent Scale contamination, A wide scope Temperature, Consistency, PH
Clothing
Mixing chest, Machine chest
Wet end, Coating starch
Stock preparation, Wet end
Improve Tissue Softness & Smoothness
Stock preparation
Wet & Dry Strength
Reduce fiber cost , Increase production. Enhance physical properties, Improve
Quality & Strength
Stock preparation
Pitch/Sticky control
Reduce Downtime. Improve Quality
Deinking
Surface sizing
Improve ink removal , Improve paper Quality
Reduce Bleaching cost
Anionic emulsion , Resistance to water or ink Improving
Of printability
Wet end
Stock preparation
Size press
Water Repellent
Anionic wax emulsion
Excellent water-proof
Coating Additive
Cleaner
Reduces Maintenance
Increase Production
Process Equipment
Insolubilizer
Linting/Dusting
Fixing agent
Insolubilizer for Binder in Coating Color. Mottling and blistering resistance are
improved and printing effect is maximized
Improved dimension stability , Improved printability
Reduces linting
It can improve the efficiency of retention aids, Dry and wet strength agents,
and internal sizing agents, or reduce their use amount while keeping the same
effects.
Coating Color
Stock preparation
(Machine chest)
Wet end
PAPER CHEMICALS
Paper Market Products :
TISSUE
FINE PAPER
NESPRINT
PACKAGING
WATER TREATMENT
• CREPING/RELEASING
• FELT CLEANER
• FELT CONDITIONING
• SCALE CONTROL
• COAGULANT
• WIRE PASSIVATION
• BIOCIDES
• CLEANER
• FELT CONDITIONING
• FLOCCULANT
• FELT CONDITIONING
• ANTIFOAM
• BIOCIDES
• WIRE PASSIVATION
• BIOCIDES
• BIOCIDES
• SCALE CONTROL
• ANTIFOAM
• BIOCIDES
• ANTIFOAM
• ANTIFOAM
• CLEANERS
• SCALE CONTROL
• ANTIFOAM
• SLUDGE DEWATERING
• SCALE CONTROL
• ROLL RELEASE
• LINTING/DUSTING
• CLEANERS
• CLEANERS
• CLEANERS
• PITCH/STICKY
• ROLL RELEASE
• ORDOUR CONTROL
• PITCH/STICKY
• FRESH WATER
• WET STRENGTH
• DRY STRENGTH
• PITCH/STICKY
CONTROL
• INSOLUBILIZER FOR
COATING COLOR
CONTROL
• ROLL RELEASE
• PITCH/STICKY
CONTROL
CONTROL
• INSOLUBILIZER FOR
• BOILOUT
• WATER CLARIFICATION
• SOFTNER
• WATER TREATMENT
• BOILOUT
• BOILOUT
• BOILOUT
• SIZING
• DEINKING
• WATER TREATMENT
• DUSTING CONTROL
• FELT CONDITIONING
• FIXING AGENT
• WATER REPELLENT
• WHITE WATER
• STRENGTH
CONTROL
CONTROL
• DEINKING
COATING COLOR
• WET/DRY STRENGTH
• DEINKING
STERILIZATION
• SCALE CONTROL
• BOILER TREATMENT
PAPER CHEMICALS
TISSUE Creping Agent
Products : HISOFT – C SERIES
Hisoft is a cationic polyamide adhesive in an aqueous solution. It is one of a series of specialty formulated crepe adhesive used in
the manufacturing of tissue and towel products. It is compatible with all crepe releasing agents, to provide the proper balance for
effective creping. It has excellent rewet properties, Yankee surface protection, and adhesive. It can increase sheet hand feel properties
and blade shelf-life.
TISSUE Softener and Crepe Release Agent
Products : HISOFT – Q & R SERIES
Hisoft have been designed specifically to be added to paper stock by wet end addition for the purpose of softening tissue and
absorbent papers or by the surface spray application method to improve Yankee dryer crepe release properties.
It contains a blend of fully refined mineral oil, esters and nonionic surfactants that makes this product easily emulsify in water.
It is specifically formulated as an effective crepe release in the MFG of tissue and towel products. It is compatible with all commercial
crepe adhesives, to provide the proper balance for effective creping.
PAPER CHEMICALS
Defoamer
Products : FETROL – DF SERIES
Mixture of aliphatic hydroxy compounds and hydrocarbons in the form of an aqueous emulsion(water soluble & oil types)
Name of Products
Composition
Appearance
Ionic Activity Solid Contents
FETROL DF-105
18%
FETROL DF -610
FETROL DF -506
FETROL DF -612
30%
Fatty alcohol
＆fatty acid
Ester mixture
Milk-white
emulsion
Weak
anionic
30%
FETROL DF -620
Name of Products
FETROL DF -500
FETROL DF -110
FETROL DF -130
FETROL DF -220
30%
30%
Composition
Appearance
Ionic
Activity
Solid
Contents
Silicone oil
compound
Silicone
Emulsion
Silicone
Emulsion
Silicone
Emulsion
Translucent
gray
Nonionic
100%
Milk-white
Milk-white
Milk-white
Weak
Anionic
Weak
Anionic
Weak
Anionic
16%
25%
14%
Properties＆Features
Foam control for membrane and high
temp. water treatment.
Foam control for membrane and high
temp. water treatment.
Foam control for papermaking.
Used cold water system.
Foam control for papermaking.
Used relatively hot water system.
Foam control for papermaking.
Used hot water system.
Properties＆Features
100% active content, effective in
nonaqueous system.
Foam control for paper and waste water
treatment industrial process.
Foam control for waste water treatment
industrial process.
Foam control for paper and waste water
treatment industrial process.
PAPER CHEMICALS
Dry & Wet Strength Resin
Products : NEOLEX – WS,DS SERIES
Dry strength resin increase burst strength and tensile strength by hydrogen bond and ionic bond with cellulose and hemicellulose in pulp.
Wet Strength Resin is the Epichlorohydrin modified cationic polyamide resins for better addition use, and have the effect of the improving
wet strength.
Contaminants cleaning Agent on Dryer
Products : FETROL – DC SERIES
Now and day, the most important target in the Paper industry is, producing paper of good quality, and more fast. But, occasionally is
happened to spend many times for cleaning and repair by frequent breakdown and pollution of production facilities, and
case that these problems cause hindrance to achieve paper-manufacturing company’s target. Hereupon our company, minimizing
occurrence of Paper-Dust-Lump that is happened in Dryer, try to reduce problem that refer over, and also maintain the best
dryer condition, and satisfy paper-manufacturing companies’desire. It is, by developed product to fulfill Paper-Manufacturing
Companies’desire. We believe that this product give many advantages to you.
PAPER CHEMICALS
Contaminants Control Machine Clothing
Products : FETROL – WP,MC,SC,DC,FC SERIES
Prevention of pitch, stickies, glues, scale and other wet end contaminants on the Wire, Felts, Machine, Pipe or eliminates deposit
accumulation resulting in improved sheet quality and extended life. Improved machine runnability.
Biocide
Products : FETROL – BC SERIES
The expected benefits of Biocide are as follows.
- Excellent for removing fungi and algae which form slime
- Prevents the slime from further development with maintaining its property long
- Works well all over the PH range
- Can be effectively used with other chemicals with optimal compatibility
Deinking Agent
Product : DEINKING – DI SERIES
As the Deinking agent of ONP(Magazine + Newsprint + Ground wood free, etc) used,
DEINKING chemical to be developed suitable for flotation/washing process system is dispersant/collecting nonionic surfactant.
This surfactant specifically designed to maximize ink removal for printed recycled fiber and office waste deinking system.
This product has demonstrate excellent dirt removal capability by effectively conditioning the inks found in white ledger furnishes.
The presence of kneading or dispersion enhances its performance. This product is intended for paper industry use only.
1. It is a nonionic surfactant of special alcohol delivative that maximized ink aeration in flotation cells
2. It is very excellent in absorbing ink into foams by preventing ink particles from re-adhering to foams
3. It has very little loss of textile during processes, and minimizes foam troubles during deinking process
4. Easy to treat waste water and good bio-degradability
PAPER CHEMICALS
Insolubilizer
Products : NEOLEX – CI SERIES
There are many chemically different types of insolubilizers, but they all have the same function – to add Water Resistance.
Water resistance is particularly important in offset printing, but also for wallpaper and in storage of board packages.
In double-coated board, crosslinkers are used in the pre-coating to impart water resistance against the topcoat.
The water resistance can be measured as wet rub and wet pick or seen as less pick, print mottle, or binder migration.
The water sensitivity of paper and board coating originates from the fact that water-soluble binders tend to lose their binding
power in contact with water and dissolve. This water sensitivity of binders can be described as the amount of O-atoms
in the molecule (in hydroxyl and carboxyl groups). The water sensitivity can be decreased by crosslinking the soluble binders
together with insolubilizers or by building an insoluble net around the binders.
It causes ionization of coating color to delay through hydrogen bonding with water molecules and enhances liquidity.
After drying is started and water is removed, rapid ionic bonding between cationic ion and anionic ion makes floating point lower
and binder migration is restricted. Therefore, coating layer becomes thicken and multi-porous. Mottling and blistering
resistance are improved and printing effect is maximized.
Surface Sizing Agent
Products : EX – SERIES
EX is a surface sizing agent for paper and paperboard. This product is added alone or combined with starch on unsized or
internally sized paper, acid or neutral. It is slightly anionic and does not need alum, which does not reduce the efficiency.
Water Repellent
Products : POLYFIX– PW SERIES
POLYFIX is water repellent of paraffin wax type. This product is can be used with starch
And binder and have a good stability of emulsification.
WATER TREATMENT CHEMICALS
PRODUCTS
FEATURES
APPLICATION
Defoamer
These products are economical defoamers that can be widely used in
sewage and wastewater treatment fields. They are made from
chemically and physiologically stable silicones, and they have both
good defoaming and antifoaming properties.
Waste water system
Flocculant
These products are effective anionic flocculants selected for chemical
treatment of wastepaper.
Waste water system
Coagulant
Cleaners
They can be used with sedimentation or flotation methods.This
products are water-soluble cationic polymer flocculants used for
easing sludge thickening or solid-liquid separation (dewatering) of
colloidal suspensions.
These products are very effective in removing general oils, emulsion
oils, and color pigments, or in treating emulsion polymerization
wastewaters.
Waste water system
These products are cleaning agents for filter cloth to solve the
Waste water system
problems of increased sludge cake water content and lower dewatering
speed due to filter cloth contamination.
These products combine heavy metal ions in wastewater and form
insoluble materials for effective metal ion removal.
Waste water system
Microbial propagation aid
This product is developed for biological treatment of wastewaters. It
shows superior effects when used in active sludge treatment.
Waste water system
Odor Control
These products are odor-cides prepared for removing offensive in
inhibiting the odor-origin microbial growth and have superior deodoring effects.
Waste water system
Heavy metal remover
CHEMICAL RAW MATERIALS
White Mineral Oils
1)FDA(a) Grade
ITEMS
Appearance
FE-50
FE-70
FE-150
FE-250
FE-350
FE-400
FE-550
FE-700
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
30
30
30
30
30
30
30
30
0.822
0.835
0.843
0.847
0.856
0.858
0.864
0.868
Flash Point, C.O.C ℃
166
202
230
250
260
266
270
280
Pour Point, ℃
-36
-28.0
-18.0
-18.0
-18.0
-18.0
-18.0
-15.0
Kinematic Viscosity, 40.0℃ cSt
7.748
12.21
30.5
44.5
71
75
103.5
143
Refractive Index, D20
1.4755
1.4605
1.466
1.467
1.471
1.4715
1.474
1.477
Carbonizable Substance
Polynuclear Compounds, 260-350nm
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
Saybolt Color
Specific Gravity, 15/4℃
2)FDA(b) Grade
ITEMS
FL-550
FL-700
FL-900
FL-1100
FL-1300
Clear
Clear
Clear
Clear
Clear
30
30
30
30
30
Specific Gravity, 15/4℃
0.864
0.873
0.8733
0.874
0.877
Flash Point, C.O.C ℃
270
280
286
300
304
Pour Point, ℃
-18
-15
-9
-9
-6
Kinematic Viscosity, 40.0℃ cSt
103.5
143
173
210.5
235
Refractive Index, D20
1.474
1.4787
1.479
1.479
1.478
Appearance
Saybolt Color
CHEMICAL RAW MATERIALS
Polyoxyethylene Nonylphenyl ether
◈ Textile industry
Product
Name
Appea
rance
CP (℃)
HLB
NP - 2
Liquid
<25
5.7
Emulsifier (W/O type)
NP - 3
Liquid
<25
8.2
Moisture control
NP - 4
Liquid
<25
8.9
Wetting, Dispersion
NP - 5
Liquid
<25
10.5
NP - 6
Liquid
<25
10.9
NP - 7
Liquid
<25
11.7
NP-6 ~ NP-8 : Emulsifier
NP - 8
Liquid
30 - 34
12.3
Emulsifier (W/O type)
NP-6 ~ NP-60 : Dispersion agent
NP - 9
Liquid
50 - 55
12.8
Penetrate, Cleaning
NP - 10
Liquid
65 - 69
13.3
Textile auxiliaries
NP - 11
Paste
72 - 76
13.7
NP - 12
Paste
79 - 84
13.9
NP - 13
Paste
87 - 91
14.4
NP - 15
Paste
92 - 98
15.0
NP-5 ~ NP-12 : Pitch dispersing agent
NP - 20
Soild
>100
16.0
Emulsifier (W/O type)
NP-8 ~ NP-12 : Deiniking, Bleaching, Felt cleaning
NP - 30
Flake
>100
17.2
Emulsifier for emulsion
NP - 40
Flake
>100
18.0
Stabilizer
NP - 50
Flake
>100
18.2
Dispersing agent
NP - 100
Flake
>100
19.1
NP-3 ~ NP-20 : Spinning, dyeing application
(bleaching, soaping agent)
NP-6 ~ NP-16 : Wetting, Dispersion, Cleaning
◈ Metal industry
NP-3 ~ NP-16 : Emulsifier for cutting oils
NP-8 ~ NP-16 : Grease remover, Cleaning Metal surface
treatmenter
◈ Dyeing/Pigment
◈ Synthetic resin
NP-20 ~ NP-100 : Dispersing emulsifier for emulsion
polymerization
◈ Fertilizer
NP-6 ~ NP10 : Anti-scattering agent, Anti-caking agent
◈ Paper and Pulp
◈ Rubber industry
NP-5 ~ NP-10 : Emulsifier for emulsion polymerization
◈ General detergent
NP-6 ~ NP-16 : Detergent base
Application
CHEMICAL RAW MATERIALS
Polyoxyethylene Glycol
◈ Textile industry
Softener, Antistatic agent, Cleaner, Dispersant, Emulsifier, Dyeing auxiliaries, sizing agent
◈ Rubber industry
◈ Metal industry
Release agent for Rubber foam or Latex foam Release agent for Tire molding, Lubricants for
extruder molding
Rust inhibitor, additives for grease, lubricants
◈ Paper industry
PEG-200,300,400 : Softener, wetting agent, PEG-1500 : Lubricant for calendering
◈ Wood industry
Shrinkage inhibitor, treatmenter for wood
◈ Cosmetics
Intermediate for cosmetics, Additives and base material for handcream shampoo, lotion
◈ Pharmaceuticals
Base material for cream, lnjection solvent, Emulsifier, Dispersant, Cleaner, Lubricant, Plasticizer
◈ Surfactant industry
◈ Ink industry
Antistatic, Plasticizer, Synthetic leather modifier, Base material for polyurethane, Special diol for
polyester synthesis
Viscosity controller, Absorption agent
◈ Agricultural chemicals
Dispersant, Emulsifier, Setting agent
Product name
Appearance
MW
MP (℃)
Application
PEG - 200
Liquid
190 - 210
<0℃
Dispersant, Emulsifier
PEG - 300
Liquid
285 - 315
<5℃
Dispersant, Emulsifier
PEG - 400
Liquid
380 - 420
4 - 8℃
Cosmetics, Dispersing
PEG - 600
Liquid
570 - 630
18 - 22℃
Lubricant, Electric coating
PEG - 1000
Solid
950 - 1050
35 - 39℃
Wetting
PEG - 1500
Solid
1300 - 1600
43 - 46℃
Softener, Tablet coating
PEG - 2000
Solid
1900 - 2100
49 - 53℃
Softener, Tablet coating
PEG - 4000
Flake
3000 - 3700
53 - 57℃
Cosmetics, Dispersant
PEG - 6000
Flake
6000 - 7000
56 - 61℃
Cosmetics, Dispersant
PEG - 8000
Flake
7000 - 9000
61 - 63℃
CHEMICAL RAW MATERIALS
Polyoxyethylene Alkyl Ether
Product name
Appearance
CP (℃)
HLB
Application
LA - 2
0.5max.
-
6.2
Emulsifier for cosmetics / mineral oils
LA - 3
0.5
-
8.1
Base for Phosphate ester
LA - 5
0.5
<25
10.8
LA - 7
0.5
53 - 58
12.3
LA - 9
0.5
78 - 82
13.4
OA - 5
0.5
<25
9.4
Mineral oil, Emulsifier, Defoamer
OA - 10
0.5
60 - 65
12.4
Emulsifier, Wetting, Cleaning
OA - 20
0.5
>100
15.4
Dyeing auxiliaries
CA - 3
0.5
-
7.1
Mineral Emulsifier (W/O type)
CA - 5
0.5
-
9.5
CA - 7
0.5
<25
11.2
Paraffin wax Emulsifier
CA - 10
0.5
73 - 79
12.9
Dyeing auxiliaries Emulsifier (cosmetics)
CA - 20
0.5
>100
15.7
Emulsion stabilizer (wax,latex)
SA - 2
0.5
-
5.5
SA - 7
0.5
-
10.7
SA - 15
0.5
-
15.0
Dyeing auxiliaries
SA - 20
0.5
-
15.3
Emulsifier for Ccometics (W/O type)
SA - 30
0.5
-
16.7
Emulsion stabilizer (wax,latex)
SC - 13
0.5
-
12.7
SC - 20
0.5
-
15.5
SC - 30
0.5
-
16.7
Emulsion, Wetting, Dyeing auxiliaries
AMAZON PAPYRUS KOREA
HEAD OFFICE : 757-7,Bongsan-Dong, Yuseong-Gu, Daejeon,305-506,KOREA
TEL : +82 42 822 9551
FAX : +82 42 822 9552