Transcript 欧州会議の目的、アウトプットに関して

NS1000 V3.0
- Hospitality featuresRev1.1 31 July., 2013
1
Table of Contents
1. Overview
2. Features
3. How to program
2
Chapter 1
Overview
3
1. Overview
Solution
Use special hotel features for effective and productive management.
Features and Benefits >>
* Features New for V3
Wake-up Calls/ Remote Wake-up Calls
Available to set from 3rd Party SIP phone
Hotel guests can set various wake-up call message.
Wake-up calls can also be set by an operator.
2 phones can be allocated with same EXT No. at each room
Any combination of phone devices can be allocated at each room
under same EXT number.
MW lamp supported on 3rd Party SIP phone*
MW lamp on 3rd Party SIP phone can be controlled.
Check-in/check-out room status monitor
Can check Room Status at a glance.
Check-in/Check-out Room Status Monitor
Property Management System (PMS) interface
A variety of hotel functions are possible when combined with a Fedelio or other PMS system.
Including check in/out, wake up calls, message waiting LED , room status, and call accounting.
External relay control
External sensing devices, such as security alarms or smoke detectors, can be installed
4
Chapter 2
Features
5
2-1. Enhancement of 3rd party SIP Device
Function Overview
NS1000 will support following function from V3.0 for 3rd party SIP device
1) Message waiting indication
There are 2 types of methods to deliver MWI to 3rd party SIP devices.
NS1000 will support both type of Message interface
a) Unsolicited mode :MWI without SIP subscription
b) Standard mode
:MWI with SIP subscription (*1)
2) Timed Reminder (available for UT phone as well)
Time reminder control operation and function is same as level as SLT.
Following table shows 3rd Party SIP device, available above function
Device Type
IP Phone
Softphone
PC
Android
IOS
SIP Devices
Grandstream (GXV3175)
Yealink (VP2009)
Teledec(ND2200)
Counter path (Bria, x-lite)
Counter path (Bria, x-lite)
Media5 (Media5-fone)
Counter path (Bria, x-lite)
Media5 (Media5-fone)
Note: *1 There is limitation. Max 64 SLT can be controlled by this mode
6
2-1. Enhancement of 3rd party SIP Device
Enhanced Video Phone connection
V3 will support P2P connection with H263(V2)/264(V3) video codec I/F
Note:
Hold and transfer operation from/to
Video Phone is now supported
SIP Carrier
HQ
NS1000
Branch
VPN
7
2-2. Features on TDE/NCP V4.2, V5, V6
Function Overview
NS1000 now catch up TDE/NCP V5 and V6 functions from V3.0
Following functions will be available
DECT Paging without PS setting
Emergency Alert
Duplicate numbering plan for Hotel function
8
Chapter 3
Function and programing
9
3. Function and Program
3.1 DECT Paging
1. Conference group call can be answered automatically without automatic
Setting for each extension.
2. PT user can start “talking” by dialing any key during broadcasting mode,
as well as DECT user.
<PBX Configuration> -> <3. Group> -> <9. Conference Group >
Automatic Answer
Enable: Automatic Answer Mode
Disable: No automatic Answer
Ability to Talk
Enable: PT/DECT can stat to talk
Disable: Can not start to talk
How to make Conference Call
Note: Conference group call has to be enabled
or coordinator using class of service.
10
3. Function and Program
3.2 Emergency Alert -1
Emergency alert is displayed on PC installed in office, when emergency
number is dialed from guest room. This feature is for SMDR based
application such as Panasonic CA Call Accounting (free of charge).
Note
1. Alert is displayed twice.
2. Duration is output as zero second after dialing.
3. Version up is NOT required for CA Call Accounting
4. Up to 10 Emergency Dial can set up
5. System Option must be enabled
11
3. Function and Program
3.2 Emergency Alert -2
1. System setting for Emergency Notification timing
<PBX Configuration> -> <11. Maintenance> -> <1. Main > -> <SMDR Option TAB>
Select Emergency Notification either
Stat and End Call or End call
2. Emergency Dial data
<PBX Configuration> -> <7. TRS> -> <4. Emergency Dial >
Enter Emergency Dial up to 30 digits
12
3. Function and Program
3.3 Duplicate Numbering plan for Hotel -
Duplicated extension numbering for hotel is now available by NS1000
On Right hand case, Extension # and Room
Number can be matched.
In this case following operation is available
<One digit call>
Dial 2 + Time Out or dial #
to call extension 2 for room service.
Dial 201
to call extension 201.
<Room No. = Extension No.>
Dial 101 + Time Out or dial #
to call Ext 101 (Room 101 )
Dial 1011
to call Ext 1011 (Room 1011)
Note:
This function is controlled by Reserved Bit
(Default is Disable)
Room
1101
(Ext 1101)
Room
1001
(Ext 1001)
Room
901
(Ext 901)
Room
1102
(Ext 1102)
Room
1002
(Ext 1002)
Room
902
(Ext 902)
..
..
..
Room
1111
(Ext 1111)
Room
1011
(Ext 1011)
Room
911
(Ext 911)
..
Room
201
(Ext 201)
Room
101
(Ext 101)
Room
202
(Ext 202)
Room
102
(Ext 102)
..
..
Room
211
(Ext 211)
Room
111
(Ext 111)
<Hotel Room /Extension Number>
13
3. Function and Program
3.3 Duplicate Numbering plan for Hotel -2
Activate Duplicate Extension Numbering
<PBX Configuration> -> <2. System> -> <9. System Option > -> <Reserved Bit TAB>
Reserved Bit 0E-2 must be on to
enable this function
14
3. Function and Program
3.3 Duplicate Numbering plan for Hotel -3
Programing Hint
To realize sample Extension number configuration and One digits service,
following program setting must be done
Room
1101
(Ext 1101)
Room
1001
(Ext 1001)
Room
901
(Ext 901)
Room
1102
(Ext 1102)
Room
1002
(Ext 1002)
Room
902
(Ext 902)
..
..
..
Room
1111
(Ext 1111)
Room
1011
(Ext 1011)
Room
911
(Ext 911)
..
1,1xx,10xx,11xx can be assigned
as Extension number
Room
201
(Ext 201)
Room
101
(Ext 101)
Room
202
(Ext 202)
Room
102
(Ext 102)
..
..
Room
211
(Ext 211)
Room
111
(Ext 111)
<Hotel Room /Extension Number>
15
END
16
Modification
20130730-01 3 NS1000 V3.0 Hospitality features_Rev1.0_30Jun2013.pptx
- 1st release
20130731-02 3 NS1000 V3.0 Hospitality features_Rev1.1_31Jun2013.pptx
- Add Video Phone operation P7
17