Transcript Document

References
Babicz, G. (2000) ISO Cnages its Quality Approach. Qulaity, 39(6), p. 56-58.
Campbell, P. (1995) An Introduction to Measuration and Calibration. Industrial Press.
CTS Inc. (1997) Fundamentals of CTS Interlaboratory Test Design. Collaborative Testing Service Inc.
Czyryca, C. (?) Interlaboratory Testing: A quality Assurance Tool for the Real World. TAPPI Journal, vol80(9),
p. 97-101.
“Determining and Reporting Measurement Uncertainties” (1994) National Conference of Standards Laboratory,
Recommended Practice RP-12.
DeVor, R.E., Chang, T.H. & Sutherland, J. (1992) Statistical Quality Design & Control. MacMillan Publisher.
Ellison, S., Rosslein, M. & Williams, A. (2000) EURACHEM/CITAC Guide: Quantifying Uncertainty in
Analytical Measurement (2nd Edition).
Gleser, L. (1998) Assessing Uncertainty in Measurement. Statistical Review, v. 13(3), p. 277-290.
Grunder, F & Bell, C. (2000) Proficiency Analytical Testing (PAT) Program. American Industrial Hygiene
Association Journal V61(5) p. 757-758.
Hogg, R. & Craig, A. (1995) Introduction to Mathematical Statistics. Prentice Hall.
Hunkar, N. (1998) Don’t just take a guess…. Quantify Machine Performance. Molding Systems v56(7) p. 26-29.
Hoaglin, D., Mosteller, F. & Tukey, J. (1982) Understanding Robust and Exploratory Data Analysis.
Kapur, K. & Lamberson, L. (1977) Reliability in Engineering Design. John Wiley & Sons.
Kasprzyk, R. & Vardeman, S. (1995) Applied Statistical Methods and Chemical Industry. Riegel’s Handbook of
Industrial Chemistry, p. 83-117.
Kuehl, R.D. (2000) Design of Experiments: Statistical Principles of Research Design & Analysis (2hd Edition).
Duxbury Press.
Locke, J. (1993) Quality Standards for Laboratories. Quality Progress, July, p. 91-94.
Maier, E.A., Quevauviller & Griepink (1993) Interlaboratory Studies as a Tool for Many Purposes: Proficiency
Testing, Learning Exercises, Quality Control and Certification of Matrix Materials. Analytica Chemica Acta, 283, p.
590-599.
Marascuilo, L. & Levin, J. (1983) Multivariate Statistics in the Social Sciences: A Researcher’s Guide. Brooks/Cole
Publishing.
Mendel, J. (1993) Outliers in Interlaboratory Testing. Journal of Testing & Evaluation, p. 132-135.
Mendel, J. (1995) Structure and Outliers in Interlaboratory Studies. Journal of Testing & Evaluation, p. 364-369.
Mandel, J. & Lashof (1987) The Nature of Repeatability and Reproducibility. Journal of Quality Technology, v19(1),
p. 29-36.
Mandel, J. & Lashof (1974) Interpretation and Generalization of Youden’s Two-Sample Diagram. Journal of Quality
Technology, vol6(1) p. 22-36.
Mason. R., Tracy, N. & Young, J, (1995) Decomposition of T2 for Multivariate Control Chart Interpretation. Journal
of Quality Technology, v27(2), p.99-108.
Mason. R., Tracy, N. & Young, J, (1997) A Practical Approach for Interpreting Multivariate T2 Control Chart. Journal
of Quality Technology, v29(4), p.396-406.
Montgomery, D. (1985) Introduction to Statistical Quality Control (2nd Edition). John Wiley & Sons.
Montgomery, D. (1999) Design and Analysis of Experiments (4 th Edition). John Wiley & Sons.
Neter, J., Kutner, M., Nachtsheim, C. & Wasserman, W. (1996) Applied Linear Statistical Models (4 th Edition).
Inwin Publisher.
Schlecht, P, Song, R, Groff, J. (1997) Interlaboratory and interlaboratory variabilities in the environmental
proficiency analytical testing (ELPAT) program. American Industrial Hygiene Assoc Journal, v58, p. 779-786.
Sullivan, J. & Woodall, W. (1996) A Comparison of Multivariate Control Charts for Individual Observations.
Journal of Quality Technology, v28(4), p. 398-408.
Taylor, J. (1997) An Introduction to Error Analysis (2nd Edition). University Press Books, Sausalito, CA.
Taylor, B. & Kuyatt, C. (1994) Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement
Results. NIST Technical Note 1297.
Tracy, N., Young, J. & Mason, R. (1995) A Bivariate Control Chart for Paired Measurements. Journal of Quality
Technology, Vol 27(4) p. 370-376.
Vardeman, S. (1994) Statistics for Engineering Problem Solving. PWS Publishing.
Vardeman, B & Jobe, J.M. (1999) Statistical Quality Assurance Methods for Engineers. John Wiley & Sons.
Wernimont, G. T. (1987) Use of Statistics to Develop and Evaluate Analytical Methods. (Ed. By Spendley, W.),
Association of Official Analytical Chemists.
Wernimont, G. (1989) Statistical Quality Control in the Chemical Laboratory. Quality Engineering 2(1) p.
Youden, W. J. (1959) Graphical Diagnosis of Interlaboratory Test Results. Industrial Quality Control, p. 24-28.
Youden, W. J. (1963) Special Session Address on The Collaborative Test. Assoc Off. Agrjc. Chem, v46, p. 55-62.
Youden, W.J. (1972) Enduring Values. Technometrics, V14(1), p. 1-11.