Transcript No Slide Title

MHF lll Connector
Micro Coaxial Connector
I-PEX Co.,Ltd.
200409 REV.1
１．SMT Receptacle & Mating Plug Cable connector
２．Ultra Low Profile : 1.5mm Mating Height
３．Accepts high frequency transmission of DC to 6GHz
４．Easy Cable Termination by “i-Fit®” Technology
５．Applicable cable :Center Conductor AWG#36 (O.D.0.8mm)
６．Easy and Speedy Cable Connection at only one operation
by our special assembling tool
７．Special testing tool and Special pulling tool are available
for total support service
PLUG (Cable side)
2
P/N: 20367-001R
1. 2
2. 85
1. 64 )
(φ
RECEPTACLE (Board side)
2
P/N: 20369-001E
1. 4
GROUND CONTACT
1
1. 3
1. 7
1
0. 3
CONTACT
1. 7
1. 4
φ
GROUND CONTACT
0. 82
0. 85
0. 4
φ
CONTACT
HOUSING
0. 3
0. 5 ±0. 05
Cut out prohibition area
0. 75 ± 0. 0 5
1. 3 ± 0. 0 5
0. 65 ± 0. 0 5
1. 3 ± 0. 0 5
1. 5 ± 0. 0 5
2. 6 ±0. 05
1. 4 ±0. 05
Coaxial Cable
1. 5
Plug : P/N 20367-001R
Receptacle : P/N 20369-001E
MATING
Temperature
： -40℃ ~ +90℃
Characteristic Impedance
： 50ohm
Frequency
： DC ~6GHz
V.S.W.R
: 1.3MAX （DC～3GHz）
： 1.5MAX （
～6GHz）
Rated Voltage
： AC60V
Contact Resistance
: 20mm-ohmMAX
Withstand Voltage
： AC200V/minute
Insulation resistance
: 500M-ohmMIN./DC100V
MHF
MHF ll
MHF lll
PLUG Ground Contact
PLUG Contact
PLUG Housing
2. 0
RECE Housing
RECE
Ground Contact
1. 5
RECE Contact
Only one operation, it’s connected without soldering by “i-Fit” Technology
PATENT pending
“i-Fit” Technology
Center Conductor
i-Fit point
Dielectric core
Outer Conductor
Jacket
Crimping
CONTACT
i-Fit
Center
Conductor
Applicable cable
O.D.0.8mm （AWG#36）
Maker
Nissei
Junkosha
Sumitomo
P/N
RF-MF5010
J12B1160
0.4DS-PBA
Hitachi
CO-6F-SB-CX50 1×36AWG
Kurabe
FWS5020
Bando
1637B-Flow
Products Number: 90283-008 (For 20367-001R)
Dimension W×D×H ： 260mm×250mm×140mm
Weight
： Approx 5.5kg
production capacity
： 450terminal / h (reference)
Instruction Manual Number : IER-001-01656
PLUG Pulling tool
P/N：90287-001
Conversion adaptor for SMA [for PLUG]
P/N：90284-001
Conversion adaptor for SMA [for RECE]
P/N：90285-001
Inspection tool for cable A’ssy
P/N：90286-001
Only one operation, it’s connected without soldering by “i-Fit” Technology
①Compare with soldering termination, “i-Fit” technology can stably
connect connector & cable with proprietary designed tooling machine.
②Soldering methodology (Soldering the cable to connector) tend to
have the unstable high frequency transmission by variable volume of
soldering paste.
“i-Fit” termination technology can provides the firm
performance of high frequency transmission and
stably connect the cable to connector without
unstable soldering methodology.
I-PEX (VSWR graph)
Sample 3
Sample 1
Sample 2
Stable VSWR shows
solid performance!!
◆High Rigidity Structure
When it is assembled by machine, the cable catcher also crimped
by crimper area. Deformation free design is generated by high
rigidity structure.
We tested “cable pulled extract test.”
The result proves it’s Deform-free concept.
Mechanism
Cable Catcher
When it is assembled by machine, the cable
catcher also crimped by crimper area. It
provides high rigidity structure.
Cable-pulled extraction test
By pulling the cable at the arrow point, we tried to extract the plug connector
from receptacle connector, and then, we checked the appearance of the connector.
10
mm
15 mm
MHF lll
Initial
After
MHF lll has deform-free feature after 5 times cable pulled extraction.
System
Maker
System
Maker
Wireless
Module Maker
Antenna Ass’y
I-PEX
MHF Connector
ANT Module
Maker
Cable Ass’y
Plug, H/T
Cable Maker
Harness Maker
-END-
I-PEX Co.,Ltd.