Transcript Energy Efficiency through Product & Process Design

This project has been assisted by
the New South Wales Government
through its Energy Efficiency Training Program
Energy Efficiency
through Product & Process
Design
Prepared by
Prepared by Plastics Industry Manufacturers of Australia (PIMA)
in partnership with Australian Management Academy (AMA);
executed in collaboration with EcoProducts
Copyright and disclaimer
The Office of Environment and Heritage and the State of NSW are pleased to allow this material to be
used, reproduced and adapted, provided the meaning is unchanged and its source, publisher and
authorship are acknowledged.
The Office of Environment and Heritage has made all reasonable effort to ensure that the contents of
this document are factual and free of error. However, the State of NSW and the Office of Environment
and Heritage shall not be liable for any damage which may occur in relation to any person taking
action or not on the basis of this document.
Office of Environment and Heritage, Department of Premier and Cabinet
Phone: (02) 9995 5000 (switchboard)
Email: [email protected]
Website: www.environment.nsw.gov.au
2
Energy Efficiency
through Product & Process
Design
Module 1 - Introduction
Explaining the Course and Goals
© Australian Management Academy and Eco Products
Agency
3
Energy Efficiency
through Product &
Process Design
The basis of this course is:
–
–
–
–
80% of potential energy savings are ‘locked in’ at the
design stage
Energy can be saved throughout the product lifecycle
Awareness and skills at the design stage can
significantly improve energy efficiency throughout the
product lifecycle
This can save costs and reduce environmental
impacts
© Australian Management Academy and Eco Products
Agency
4
Energy Efficiency
through Product &
Process Design
The training goals are to:
–
–
–
–
–
Increase energy efficiency awareness and skills
Introduce sustainability and Sustainable
Manufacturing
Introduce Life Cycle Thinking
Show where energy is used in the life cycle and how it
can be saved
Provide tools for evaluating product & process options
© Australian Management Academy and Eco Products
Agency
5
Energy Efficiency
through Product &
Process Design
An accredited Certificate IV (or higher) level course based on MSA
competency unit:
MSAENV472A
Implement and monitor environmentally sustainable work practices
1.
2.
3.
4.
Investigate current practices in relation to resource usage.
Set targets for improvements.
Implement performance improvement strategies.
Monitor performance.
© Australian Management Academy and Eco Products
Agency
6
Your Participation
•
•
•
•
Attend the 2 day course
Complete pre-training & post-training surveys
Complete 4 assessment tasks during 2 days
Submit one final assessment task within 3
months to demonstrate implementation of an
energy efficiency project
© Australian Management Academy and Eco Products
Agency
7
Course Outline – Day 1
• Sustainable Manufacturing
• Energy Efficient Manufacturing
• Life Cycle Thinking
• Energy Management and optimisation
© Australian Management Academy and Eco Products
Agency
8
Course Outline – Day 2
• Workshop
– Energy Systems
– Financial Assessment of Energy Efficiency
• Process Design for Energy Efficiency
• Product Design for Energy Efficiency
© Australian Management Academy and Eco Products
Agency
9