Transcript afafsd - East Electric SRL

INDUSTRIAL AUTOMATION FROM ONE PROVIDER
EAST ELECTRIC
SYSTEMINTEGRATOR & SALES PARTNER
1
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
CC-ErgoSpin
2
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Many challenges - one solution
Quality
Ergonomics
Warranty costs
Efficiency
Flexibility
Energy costs
Cycle time
CC-ErgoSpin
3
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Outward Appearance
Grip design according
latest findings in
ergonomics research
Robust outer shell
for demanding
work environments
Clearly visble LEDs
for OK/NOK indication
securely coded
angle heads
to avoid mix-ups
Same cable connection
as ErgoSpin
4
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Inner Values
• Availability Champion
• Waste Minimizer
• Process Optimizer
• Employee Protector
• Environmental Acitivist
• Cost Reducer
• Team Player
5
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Availability Champion
• Tested under full load for 1 Mio. cycles without
maintenance
• Robust Design for a long product life
• Reliable even in demanding environments
(e.g. oily work place)
• High endurance
6
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Availability Champion
• Higher safety standards
due to more control
• In Software BS350 included statistical
tools allow for a more precise
tightening
case analysis
• Elektronic switch-off with current
control
vs. mechanical cut-out with air
pressure tools -> lower tolerances of
switch-off torque
with electronical monitoring
7
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Process Optimizer
• One CC-ErgoSpin can replace multiple air pressure
tools – up to 99 tightening programs can be saved on
one CC-ErgoSpin tool
• Distinct assignment of tightening programs to work
pieces possible (e.g. by barcode)
Before
After
8
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Employee Protector
• Grip design according to latest findings
in ergonomics research
• Little vibration
-> minimized stress on the worker‘s arm
• No risk by air pressure hoses
• Less noise emission than air pressure tools
9
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Environmental Activist
• Compared to air pressure tools the CC-ErgoSpin uses
up to 95% less energy and thus contributes to the
conservation of resources
• Simultaneously it can save up to >95% of CO2 release
– this decreases global warming
• Due to its high durability and its precision the CCErgoSpin also protects the environment indirectly:
by the reduction of waste
10
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Cost Reducer
• The CC-ErgoSpin lowers the costs in the plant
-> lower total costs of ownership (TCO)
Total cost of ownership (TCO) – 7 year life cycle
(Experience supported calculation based on real plant data)
900
Maintenance / Repair
Per nutrunner
Cost in Euro per year
800
700
Replacement batteries
600
Oil
500
Energy
400
300
200
100
0
Air pressure Electronic
50% less total costs of electronic tools compared to air pressure tools
11
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Team player
• CC-ErgoSpin Kanäle sind
anpassungsfähig:
In Umgebungen mit bereits
bestehenden Rexroth
Schraubsystemen lassen sie
sich mühelos integrieren
Sie lassen sich problemlos um
weitere Rexroth Schraubkanäle
erweitern (CC-ErgoSpin, Spindeln und ErgoSpin)
– Dafür sorgt das einheitliche Bediensystem BS350.
12
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Technical Data CC-ErgoSpin
Torque range
[Nm]
Max. Output
Drive Speed
Tool mount
Weight
[kg]
Length
[mm]
CC-ESA030
6-30
800
3/8“ square
1.6
416
CC-ESA040
8-40
1000
3/8“ square
1.7
434
1
201
1.1
333
CC-ESM012QD
2.4-12
1090
¼“ quick
change
chuck
CC-ESV012
2.4-12
1090
-
13
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Technical Data CC-CS351
CC-CS351
Width [mm]
210
Height [mm]
357,6
Length [mm]
245,5
Weight [kg]
9.7
Until transfer into standard software (estimated for October 2013)
the CC system still runs on special software (BS350 V2.218)
14
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Interfaces CC-CS351
Name
Function
XDN1
Motor-Stop Interface
X3U1, X3U2
USB-Host Interface
of the CS351 controller
Slot A
inoperable
Slot B1, B2
Slot for use of standard modules
type B
X3C1
RS232 Interface
X7E1
Ethernet Interface
X6C1
Mass storage slot
XDVI
DVI Interface for connection of an
external monitor
X3U4
USB-Host Interface
If a fieldbus interface is required, the CC-ErgoSpin handeheld nutrunner can also
be operated with a „regular“ CS351, which provides this inteerface.
15
Thank you for your attention!
TOGETHER WE ARE MORE
POWERFULL
16