Transcript UNIVERSAL SAFETY & SERVICES PTE LTD CATALOGUE USS …

.
SINGAPORE
Universal Safety & Services Pte Ltd
3 Church Street Level 8 Samsung Hub, Singapore 049483
email : [email protected]
Website : http://www.unisafetyservices.com
Tel : +65 6408 0141
Fax1: +65 6408 0101
Fax2: +65 31257164
PERKINS
We can provide services for the purchase of the machine ships with brands Perkins
and we provide fast service and reasonable price, primacy of we are able to provide services
as much as possible to reach our customers in a number of remote places that provide service
door to door to hand smpai direct customer and the customer is not in overload dengann
expensive for the shipping cost,
Perkins gives you comfort in the maintenance and care of the machine. Perkins also reliable
in all conditions in marine areas
The following are some machines Perkin’s, we can provide :
PERKINS M92B
Marine Diesel Engine for Leisure Craft and Commercial Craft Applications
Naturally Aspirated
4 cylinder
Maximum Power : 86 HP (64 kW) @ 2400 RPM
The Perkins Sabre M92B engine is the successor to the very
successful M92. It has been inspired by and led by the future
requirements of our customers to meet the needs of the marine
industry.
Built to the most demanding standards, the M92B engine meets all
the requirements of both EC Stage 2 and USA EPA Tier 2 offhighway emissions legislation from 2004 and brings significant
improvements over the M92 highly successful predecessor.
The M92B is a quiet 4.4 litre unit delivering improved performance
and reduced operating costs in an efficient package ideal for a range
of marine applications.
Specfication M92B
Engine Configuration
Aspiration
Bore / Stroke
Displacement
Combustion system
Compression ratio
Engine Rotation
Fuel Injection Equipment
Continuous Engine
Operating Angles
Power Take Off
Ltd).
Weight (Wet)
: 4 cylinder, in-line vertical, 4 stroke, water cooled
: Naturally aspirated
: 105 mm (4.13 in) x 127 mm (5.00 in)
: 4.4 litre (269 cu.in.)
: Direct injection
:18.23:1
: Anti-clockwise viewed from rear.
: Delphi rotary with electric stop.
: 20 ° front up
: 25 ° sideways (35° sideways intermittent)
: Available from front end drive (for drive limitations refer to Sabre Engines
: * 423 kg (933 lb) engine only
* 460 kg (1014 lb) with ZF 45A reverse gearbox
*504 kg (1111 lb) with Newage PRM500D reverse gearbox
PERKINS M135
Marine Diesel Engine for Leisure Craft Applications
Naturally Aspirated
6 cylinder
Maximum Power: 135 HP (99 kW) @ 2600 RPM
* Premium engine features for reliability - minimises down time and
service costs
* Environmentally friendly - developed with current and proposed
emissions legislation in mind. Helping to keep the world
environmentally safe
* Unrivalled worldwide parts and service network - available wherever
you are
* One of the most compact packages in its class - offers boat design
Flexibility with
easier new boat and repower installation
Specfication M135
Engine Configuration
Aspiration
Bore / Stroke
Displacement
Combustion system
Compression ratio
Engine Rotation
Fuel Injection Equipment
Governing
Continuous Engine
Operating Angles
Power Take Off
Engines Ltd.)
Weight (Wet)
: 6 cylinder, in-line vertical, 4 stroke, water cooled
: Natural
: 100mm (3.94in) x 127mm (5.00in)
: 6.00 litres (365.0 cu.in.)
: Quadram Direct Injection
: 16.5:1
: Clockwise viewed from front
: Stanadyne rotary with electric stop solenoid
: Mechanical
: 20° engine front up
: 8° engine front down
30° sideways
: Available from front end drive (for drive limitations refer to Sabre
: * 595 kg (1312 lb) engine only
* 620 kg (1367 lb) with ZF Hurth HSW 450A gearbox
* 672 kg (1481 lb) with Newage PRM 500D gearbox
PERKINS M150Ti
Marine Diesel Engine for Leisure Craft and Commercial Craft Applications
Turbocharged Aftercooled
6 cylinder
Maximum Power : 150 BHP (111.8 kW) @ 2500 RPM
* Environmentally friendly - Satisfies the requirements of IMO Annex VI Stage 1, marine legislation
* Most compact package in its class - Offers boat design flexibility - easier new boat and repower installation
* Premium engine features for reliability and durability - Minimises down time and service costs
* Unrivalled worldwide parts and service network - Service available wherever you are
* Lowest cost of ownership in its class - It pays to compare running costs
Specfication M150Ti
Engine Configuration
: 6 cylinder, in-line vertical, 4 stroke, water cooled
Aspiration
: Wastegated turbocharger, charge air cooled
Bore / Stroke
: 100mm (3.94in) x 127mm (5.00in)
Displacement
: 6.00 litres (365.0 cu.in.)
Combustion system
: Fastram Direct Injection
Compression ratio
: 16.0:1
Engine Rotation
: Clockwise viewed from front
Fuel Injection Equipment
: Bosch rotary with boost control and electric stop solenoid
Governing
: Mechanical
Continuous Engine Operating: Maximum continuous operating angles:
Angles
: 20° engine front up
8° engine front down (option kit)
30° sideways
Power Take Off
: Available from front end drive (for drive limitations refer to Sabre Engines
Ltd.)
Weight (Wet)
: * 609 kg (1342 lb) engine only
* 660 kg (1455 lb) with ZF Hurth 45A gearbox
* 710 kg (1565 lb) with Newage PRM 500D gearbox
PERKINS M190C
Marine Diesel Engine for Leisure Craft and Commercial Craft Applications
Six cylinder turbocharged aftercooled
Maximum Power: 190 HP (142 kW) @ 2100 RPM
Meets EPA Tier 2, IMO, RCD and CCNR stage 2 emission standards
These are the latest addition to the common platform concept of 1100 Series
diesel engines. Assembled on a new high technology production line, these
ultra clean engines will provide a superior replacement for all marine six
cylinder models. Frequent computerised checks during the production process
ensure high build quality excellence is maintained.
The new engines boast considerable increases to delivered power, torque and
noise reduction. These have been achieved through changes to combustion
areas, turbocharger geometry, increased cylinder displacement and
significantly, the inclusion of a high pressure, common rail fuel system. These
new engines incorporate components of Caterpillar ACERT™ technology.
A complete fuel system, air cleaner and heat exchanger is supplied as standard.
Choice is provided to customers through the availability of a large variety of
standard specifications incorporating a choice of alternator and front PTO.
Specfication M190C
Number of cylinders
Cycle
Displacement
Aspiration
Bore / Stroke
Combustion system
Compression ratio
Engine Rotation
Cooling system
Operational angle (max)
Power Take Off
Dry Weight
Wet Weight
Basic Dimensions
: Vertical in-line 6 cylinder
: 4 stroke
: 6.6 litres
: Turbocharged aftercooling
: 105 mm x 127 mm
: Direct injection
: 16.2:1
: Anti-clockwise viewed on flywheel
: Water
: 20 ° nose up. Heel 25 ° constant, 35 ° intermittent
: Refer to installation guide
: 698 kg
: 736 kg
: * Length - 1328 mm
* Width - 805 mm
* Height - 828 mm
PERKINS M216C
Marine Diesel Engine for Leisure Craft and Commercial Craft Applications
Six cylinder turbocharged aftercooled
Maximum Power: 216 HP (161 kW) @ 2400 RPM
Meets EPA Tier 2, IMO, RCD and CCNR stage 2 emission standards
These are the latest addition to the common platform concept of 1100 Series diesel
engines. Assembled on a new high technology production line, these ultra clean
engines will provide a superior replacement for all marine six cylinder models.
Frequent computerised checks during the production process ensure high build quality
excellence is maintained.
The new engines boast considerable increases to delivered power, torque and noise
reduction. These have been achieved through changes to combustion areas,
turbocharger geometry, increased cylinder displacement and significantly, the
inclusion of a high pressure, common rail fuel system. These new engines incorporate
components of Caterpillar ACERT™ technology.
A complete fuel system, air cleaner and heat exchanger is supplied as standard.
Choice is provided to customers through the availability of a large variety of standard
specifications incorporating a choice of alternator and front PTO
Specfication M216C
Number of cylinders
Cycle
Displacement
Aspiration
Bore / Stroke
Combustion system
Compression ratio
Engine Rotation
Cooling system
Operational angle (max)
Power Take Off
Dry Weight
Wet Weight
Basic Dimensions
: Vertical in-line 6 cylinder
: 4 stroke
: 6.6 litres
: Turbocharged aftercooling
: 105 mm x 127 mm
: Direct injection
: 16.2:1
: Anti-clockwise viewed on flywheel
: Water
: 20 ° nose up. Heel 25 ° constant, 35 ° intermittent
: Refer to installation guide
: 698 kg
: 736 kg
: * Length - 1328 mm
* Width - 805 mm
* Height - 828 mm
PERKINS M225Ti
Marine Diesel Engine for Leisure Craft Applications
Turbocharged Aftercooled
6 cylinder
Maximum Power: 225 HP (165.5 kW) @ 2500 RPM
* Most compact package in its class. Offers boat design flexibility - easier new boat and repower installation
* Premium engine features for reliability and durability. Minimising down time and service costs
* Environmentally friendly - Satisfies the requirements of IMO Annex VI Stage 1, marine legislation
*Unrivalled worldwide parts and service network. Service available wherever you are
* Lowest cost of ownership in its class. It pays to compare running costs
Specfication M225Ti
Engine Configuration
Aspiration
Bore / Stroke
Displacement
Combustion system
Compression ratio
Engine Rotation
Fuel Injection Equipment
Governing
Continuous Engine
Operating Angles
Power Take Off
Ltd.)
Weight (Wet)
: 6 cylinder, in-line vertical, 4 stroke, water cooled
: Wastegated turbocharger, charge air cooled
: 100mm (3.94in) x 127mm (5.00in)
: 6.00 litres (365.0 cu.in.)
: Fastram Direct Injection
: 16.0:1
: Clockwise viewed from front
: Bosch rotary with boost control and electric stop solenoid
: Mechanical
: 20° engine front up
: 8° engine front down
30° sideways
: Available from front end drive (for drive limitations refer to Sabre Engines
: * 609 kg (1342 lb) engine only
* 683 kg (1505 lb) with ZF Hurth HSW 630A gearbox
* 709 kg (1562 lb) with Twin Disc MG5050SC gearbox
PERKINS M250C
Marine Diesel Engine for Leisure Craft and Commercial Craft Applications
Six cylinder turbocharged aftercooled
Maximum Power: 250 HP (186 kW) @ 2400 RPM
Meets EPA Tier 2, IMO, RCD and CCNR stage 2 emission standards
These are the latest addition to the common platform concept of 1100 Series diesel
engines. Assembled on a new high technology production line, these ultra clean
engines will provide a superior replacement for all marine six cylinder models.
Frequent computerised checks during the production process ensure high build
quality excellence is maintained.
The new engines boast considerable increases to delivered power, torque and noise
reduction. These have been achieved through changes to combustion areas,
turbocharger geometry, increased cylinder displacement and significantly, the
inclusion of a high pressure, common rail fuel system. These new engines
incorporate components of Caterpillar ACERT™ technology.
A complete fuel system, air cleaner and heat exchanger is supplied as standard.
Choice is provided to customers through the availability of a large variety of
standard specifications incorporating a choice of alternator and front PTO
.
Specfication M250C
Number of cylinders
Cycle
Displacement
Aspiration
Bore / Stroke
Combustion system
Compression ratio
Engine Rotation
Cooling system
Operational angle (max)
Power Take Off
Dry Weight
Wet Weight
Basic Dimensions
: Vertical in-line 6 cylinder
: 4 stroke
: 6.6 litres
: Turbocharged aftercooling
: 105 mm x 127 mm
: Direct injection
: 16.2:1
: Anti-clockwise viewed on flywheel
: Water
: 20 ° nose up. Heel 25 ° constant, 35 ° intermittent
: Refer to installation guide
: 700 kg
: 738 kg
:* Length - 1328 mm
* Width - 805 mm
* Height - 828 mm
PERKINS M300C
Marine Diesel Engine for Leisure Craft and Commercial Craft Applications
Six cylinder turbocharged aftercooled
Maximum Power: 300 HP (225 kW) @ 2400 RPM
Meets EPA Tier 2, IMO, RCD and CCNR stage 2 emission standards
These are the latest addition to the common platform concept of 1100 Series diesel
engines. Assembled on a new high technology production line, these ultra clean
engines will provide a superior replacement for all marine six cylinder models.
Frequent computerised checks during the production process ensure high build quality
excellence is maintained.
The new engines boast considerable increases to delivered power, torque and noise
reduction. These have been achieved through changes to combustion areas,
turbocharger geometry, increased cylinder displacement and significantly, the
inclusion of a high pressure, common rail fuel system. These new engines incorporate
components of Caterpillar ACERT™ technology.
A complete fuel system, air cleaner and heat exchanger is supplied as standard.
Choice is provided to customers through the availability of a large variety of standard
specifications incorporating a choice of alternator and front PTO
.
Specfication M300C
Number of cylinders
Cycle
Displacement
Aspiration
Bore / Stroke
Combustion system
Compression ratio
Engine Rotation
Cooling system
Operational angle (max)
Power Take Off
Dry Weight
Wet Weight
Basic Dimensions
: Vertical in-line 6 cylinder
: 4 stroke
: 6.6 litres
: Turbocharged aftercooling
: 105 mm x 127 mm
: Direct injection
: 16.2:1
: Anti-clockwise viewed on flywheel
: Water
: 20 ° nose up. Heel 25 ° constant, 35 ° intermittent
: Refer to installation guide
: 700 kg
: 738 kg
:* Length - 1328 mm
* Width - 805 mm
* Height - 828 mm