Transcript Solutions for Water and Wastewater Engineering, Modeling

Solutions for Water and
Wastewater Engineering,
Modeling, and Management
Robert Mankowski
Bentley
Agenda
• Product Context
• Product Portfolio
• Water
• Wastewater
• Storm Water
• Questions
Bentley
Cadastre
Bentley I/RAS B
Bentley Descartes
PowerMap Field for Comms
PowerMap Field
PowerMap
Geospatial Architecture
Bentley
Fiber,
Copper,
Coax,
Inside
Plant
Bentley
Water,
Storm,
Sewer,
Bentley
Expert
Designer
Bentley
Electric
Bentley
Multi
Utility
Work
Management
System
ArcGIS
Operational
Support
Systems
SmallWorld
Bentley
Map
MicroStation with Geospatial Extension
Connectors
Bentley Geospatial Server
DGN
XFM
DGN
Attribute
DB
Spatial DB
RDBMS
(Spatial)
Geo Web Publisher
Geo Web Publisher for Comms
ArcFM
Product Context
Business Drivers
• Aging Infrastructure
• American Society of Civil Engineers gives the United
States a D- in Drinking Water and Wastewater
• Institution of Engineers, Australia (IEA) rates
infrastructure “below average to poor”
• Institution of Civil Engineers rates U.K.’s infrastructure
as “fair”
• Developing Infrastructure
• 43% of households in major African cities connected
to water system (92% in Europe)
• 18% for sewer (92% in Europe)
Business Drivers
• Regulation and Legislation
• Clean Water Act
• GASB 34 - Value of assets (Pipelines > 50%)
• Possible legislation - $15 billion over 5 years w/
preference towards systems with “asset management
plans”
• GAO Report (March 2004) - Urging EPA to
encourage use of asset management
• CMOM – Capacity, Management, Operations and
Maintenance
• ANZ and UK - Utility operators subject to renewable
license to operate
• Privatization of water systems
• Efficient operations
• Rate control
Asset Management
• An integrated optimization process of
“managing infrastructure assets to
minimize the total cost of owning and
operating them, while continuously
delivering the service levels customers
desire, at an acceptable level of risk.”
Technology Involved
•
•
•
•
•
•
•
•
•
Mapping System (GIS)
Analysis Tools
Asset Registry
Computerized Maintenance Management System
(CMMS)
Work Management System (WMS)
Supervisory Control and Data Acquisition (SCADA)
Customer Information System (CIS)
Financial and Accounting
and more…
GIS System
(Bentley Water)
Analysis Tool
(Bentley WaterGEMS)
Product Portfolio
Water Resources Products
• Water Distribution
•
•
•
•
Bentley Water
Bentley WaterGEMS
Bentley WaterCAD
Bentley HAMMER
• Sanitary Sewer
• Bentley Wastewater
• Bentley SewerGEMS
• Bentley SewerCAD
• Storm Water
•
•
•
•
•
•
Bentley Wastewater
Bentley CivilStorm
Bentley StormCAD
Bentley PondPack
Bentley CulvertMaster
Bentley FlowMaster
Bentley Water
Geospatial Asset Management for Water Systems
Rule-based annotation
Cell placement with annotation
Bulk assignment of attribute to like elements
Automatic plan and profile generation
Automatic service load calculations
Sideviews/pipe terrain profiles
Node diagrams
Thematic presentation of data
Ability to group features into a work order
Ability to isolate valves to close
List consumers out of service based on valve state
Analysis of directed, weighted, linear networks
Creation and editing of network entities
Shortest path, radial searches, trace forward, trace-back
Annotate automatically from database attributes
Generate buffers and zones for analysis
Measurement tools for distance, area, and volume
Query spatial and ancillary data for selected elements
Utilize Oracle Spatial data for enterprise data access
Add grids and legends to mapping data
Utilize powerful raster tools for image backdrops
Thematic representation of attributes and graphics
Supports high-resolution output to printers and plotters
• User-defined attributes
• Integrated Map Management
• Oracle Spatial compatibility
• Image Integration
• Data Import/Export functions
• Publish network data via Bentley Publisher
Bentley Water
• Bentley Water XFM
• All new Bentley Water built on XFM and
Bentley Map
• Incorporating some analysis capabilities from
Bentley WaterGEMS/WaterCAD
• Available ~Q1 2007
WaterGEMS and WaterCAD
WaterGEMS V8
XM edition
ArcGIS
platform
WaterCAD V8
XM edition
LoadBuilder
Windows
Stand-alone
Terrain Extraction
ModelBuilder
MicroStation
platform
Included
Available
Darwin Calibrator
Add-ons
Darwin Designer
AutoCAD
platform
Skelebrator
WaterSAFE
SCADAConnect – Available Add-on for All Product Variations
WaterGEMS / WaterCAD
Water distribution design and modeling
Criticality Analysis
Automated fire flow analysis
Source trace and water age analysis
Active topology alternatives
Variable speed pumping
Constituent water quality analysis
Drawing review tools
System head & hydrant curves
Tank mixing models
Rule-based & logical controls
Elevation Extraction (AutoCAD version)
• MicroStation, Stand-Alone, ArcGIS, & AutoCAD
• Quick model building from any data source
• Easy-to-use layout and editing tools
• Unrivaled hydraulic analysis features
• Stunning results presentation tools
Leakage and sprinkler modeling
Capital cost & energy analysis
Comprehensive demand management
Shapefile synchronized connections
CAD to model automated conversion
Statistical result analysis
Persistent database connections
Sub model management
Pressure Dependent Demands
Integration with HAMMER for transient analysis
Animated pump and head loss curves
V8 XM Edition
• Major release from Bentley’s
Haestad Solution Center
• All-new technology
• Free for SELECT subscribers
• Upgrade pricing available
Bentley’ Haestad Solution Center
- Watertown, CT -
What’s v8 all about?
Speed
Interoperability
Usability
New features
 Designed to support all-pipe models
 The only truly interoperable model in the market
 Easier than ever (believe it or not!)
 Dozens of new features to maximize your ROI
v8 in a Nutshell
WaterCAD V8 XM Edition
Interoperability and GUI
•
•
•
•
•
•
•
•
All new ArcGIS platform
All new MicroStation platform
All new stand-alone platform
Enhanced thematic mapping
GIS-style symbology
Contouring control center
Background layer control
Full GUI customization
WaterGEMS V8 XM Edition
ArcGIS interface shown
Bentley Water / WaterGEMS Demo
HAMMER
Transient analysis and water hammer modeling
• Avoid catastrophic failure of pipes & equipment
• Use the rigorous Method of Characteristics
• Model any transient event
• Simulate any surge protection device
Prevent system damage
Develop cost-effective surge control strategies
Trim construction and O&M budgets
Model any surge protection device
Minimize wear and tear on pipes
Simulate any transient condition
Design and operate with greater reliability
Eliminate costly over design
Ensure the longevity of your water system
Prepare for power failures
Improve water quality
Minimize service interruptions
• Complete integration with WaterGEMS/CAD
HAMMER Coming Attractions
• Fully integrated (more than interoperable)
with WaterGEMS
• All new WaterGEMS v8 user interface,
data modeling, scenarios, reporting, etc
Bentley Wastewater
Geospatial Asset Management for Sewer Systems
Rule-based annotation
Cell placement with annotation
Bulk assignment of attribute to like elements
Automatic plan and profile generation
Automatic service load calculations
Sideviews/pipe terrain profiles
Node diagrams
Thematic presentation of data
Ability to group features into a work order
Ability to isolate valves to close
List consumers out of service based on valve state
Analysis of directed, weighted, linear networks
Creation and editing of network entities
Shortest path, radial searches, trace forward, trace-back
Annotate automatically from database attributes
Generate buffers and zones for analysis
Measurement tools for distance, area, and volume
Query spatial and ancillary data for selected elements
Utilize Oracle Spatial data for enterprise data access
Add grids and legends to mapping data
Utilize powerful raster tools for image backdrops
Thematic representation of attributes and graphics
Supports high-resolution output to printers and plotters
• User-defined attributes
• Integrated Map Management
• Oracle Spatial compatibility
• Image Integration
• Data Import/Export functions
• Publish network data via Bentley Publisher
Bentley Wastewater
• Bentley Wastewater XFM
• All new Bentley Water built on XFM and
Bentley Map
• Incorporating some analysis capabilities from
Bentley SewerGEMS/SewerCAD
• Available ~Q2 2007
SewerGEMS
Sanitary and Combined Dynamic Sewer Modeling
Multi platform
environment
Automatic sanitary
loading allocation
Dynamic modeling
Sanitary and
combined sewer
system element
SewerGEMS Demo
SewerCAD
Sanitary Sewer Design & Modeling
• Sanitary and wet-weather modeling
• Steady-state & Extended Period
• Pressure & gravity systems
• Automated design for pipes & inlets
CivilStorm
Fully-dynamic stormwater analysis
• Model in geospatial environments
• Analyze complex stormwater systems
• Optimize system performance
• Present comprehensive results
• Experience the dynamic calculation engine
Stand-Alone and AutoCAD interface
Fully-dynamic modeling
Interconnected system modeling
Water quality assessments
Complex flow regime analysis
NPDES permit modeling
Scaled layout in Stand-Alone interface
Variety of methods for computing runoff
Profile manager
Scenario manager
Comprehensive engineering libraries
Model looped systems and diversions
Attenuate hydrographs due to storage
CivilStorm Demo
StormCAD
Storm sewer modeling and design
Capital cost analysis
Rational method hydrology
Gradually-varied flow analysis
HEC-22 methodology
Drawing review tools
Shapefile synchronized connections
Persistent database connections
Scenario manager
Scaled and schematic layout
Background support for model layout
CAD to model automated conversions
Profile manager
HEC-22 and AASHTO detailed reports
Curved pipe alignments
System capacity analysis
Accepted by FEMA
• Stand-Alone & AutoCAD interface
• Quick model building tools
• Easy-to-use layout & editing tools
• Automated system design
• Stunning result presentation tools
PondPack
Detention pond design and urban hydrology analysis
• Automate pond and outlet design
• Track project history
• Model interconnected ponds
• Account for travel time and time of concentration
• Perform complete system analyses
Interconnected pond modeling
Limited water quality analysis
Detailed graphing and reporting
ProjectWise integration
Accepted by FEMA
Intuitive interface
Unlimited number of storm events
Industry-standard runoff methods
Time of concentration calculator
Numerous peak flow methods
Water quality BMP calculations
CulvertMaster
Culvert Design & Analysis
Model any situation that requires the design or
evaluation of a culvert using HDS-5 methods,
including roads, driveways, embankments, etc.
FlowMaster
Hydraulics calculator
Evaluate the hydraulics of virtually any type of
hydraulic structure, including pipes, ditches, open
channels, weirs, orifices, and inlets.
Questions?
Robert Mankowski
Director of Product Management
Geospatial Platform and Municipal Products
[email protected]