Transcript Document

1
Copyright © July 2004 by ITS
www.its-tel.com
Access Control Door Phone Units
PanCam-C
PanCam-T
Pancode
Pantel
Pancode
Pantel
2
Copyright © July 2004 by ITS
www.its-tel.com
Access Control Door Phone Features
All units have the following features:
•
•
•
•
•
•
Connected to the analog port of the PBX
Internal door opening code from any extension
Day/Night mode
High quality speakerphone
Support 12V AC/DC
Volume control
• Works in conjunction with card readers and security
devices
• Simple to operate and program
3
Copyright © July 2004 by ITS
www.its-tel.com
PanCam-C
Main Features
• Build-in black & white or color
high-quality pinhole camera
• Direct dialing to any extension
• Speed-dial to internal or external
subscribers
• Entry access code
• Weather and vandal resistant
4
Copyright © July 2004 by ITS
www.its-tel.com
PanCam-T
Main Features
• Build-in black & white or color
high-quality pinhole camera
• Dialing to a pre-defined
extension/subscriber
• Weather and vandal resistant
5
Copyright © July 2004 by ITS
www.its-tel.com
Pancode
Main Features
• Direct dialing to any
extension
• Speed-dial to
internal or external
subscribers
• Entry access code
• Outdoor and Indoor
version
Indoor
6
Copyright © July 2004 by ITS
Outdoor
www.its-tel.com
Pantel
Main Features
• Dialing to a predefined extension/
subscriber
• Outdoor and
Indoor version
Indoor
7
Copyright © July 2004 by ITS
Outdoor
www.its-tel.com
Installation
Outdoor Bracket
Indoor Bracket
Connector Wiring
8
Copyright © July 2004 by ITS
www.its-tel.com
Installation Overview
SD
PBX
Analog
Port
Door Lock Relay
P.S.
9
Copyright © July 2004 by ITS
www.its-tel.com
Connector
Power Supply (12-24VDC)
External devices
Door Lock Relay
Exit Button
Analog PBX Port
10
Copyright © July 2004 by ITS
www.its-tel.com
Programming
• Call the Door Phone unit from any
extension
• The unit answers and plays a beep
• Dial *900
• Insert password (default = 1234)
• Refer to the Programming Table in the
manual
11
Copyright © July 2004 by ITS
www.its-tel.com
Special Features and Applications
Day/Night mode
This feature allows you to set the “Call” button to a
different destination for day and night.
Changing the mode of operation:
• Call the unit’s extension number
• Press *80 for “Day mode” (Default)
or
• Press *82 for “Night mode”
12
Copyright © July 2004 by ITS
www.its-tel.com
Special Features and Applications
(Cont’d)
NOTE: For PanCam-C / Pancode only:
Speed Dial mode
This feature allows you to define the “Speed Dial” codes
for each button on the keypad, directing you to different
destinations.
Changing to the “Speed Dial mode”:
• Call the unit’s extension number
• Press *900 + password
• Press *152
• Start programming (refer to the Programming Table
in the manual)
13
Copyright © July 2004 by ITS
www.its-tel.com