Transcript Metal Engraving - GCC / GCC LaserPro

Metal Engraving With CO2 Laser
GCC LaserPro
Contents
1.
2.
3.
4.
5.
6.
Purpose
Unique Optical Design
Compatible Models
Limitation
Parameters
Competitors comparison
Purpose
• Tiny fonts and logos marking on metal
materials
• Need more power density to engrave
thinner and smaller
Unique Optical Design
• Laser beam firstly expanded by LaserPro
Beam Expander Module, and the
expanded beam will turn into smaller spot
size than usual after passing through
focusing lens, thus higher power density.
Please see the illustration at next page.
Unique Optical Design
• Optical Design
Compatible Models
• LaserPro series over 50W models are
recommended
• Under 50W might work but not efficient
Limitations
• The reflection from stainless steel might
damage laser tube
• The contrast of engraving on stainless
steel is not as good as on coated metal
• Due to engraving on stainless steel
requires high power thus engraving speed
will be slow.
Parameters
Competitors comparisonCost
LaserPro
Device：Beam Expander
Standard;
US$0
Universal
Device：HPDFO
Optional;
MSRP US$2,650
Comparison：
LaserPro is affordable; Extra benefit and versatile
application
Competitors comparisonFocal Length
LaserPro
Device：Beam Expander
Allow Focal Range
+/- 1.0 mm
Universal
Device：HPDFO
Strict Limitation of Focal
Range +/- 0.625 mm
(Material must be very
flat)
Comparison：
Material varies, focusing next to 0 is a limitation to
achieve.
Competitors comparisonEngraving Contrast
LaserPro
Universal
Device：Beam Expander Device：HPDFO
Image contrast on
N/A
stainless steel is not so
good as engraving on
coated metals
Comparison：
Either LaserPro nor Universal could not reach the
contrast effect of applying Thermark compound
Competitors comparisonSmall Text
LaserPro
Device：Beam Expander
Point 2 text engraving on
stainless steel is clear
and recognized
Universal
Device：HPDFO
Point 2 text engraving on
stainless steel is clear
and recognized
Comparison：
Both LaserPro and Universal can achieve small text
engraving