Monitoring and Managing Device in Logic
Download
Report
Transcript Monitoring and Managing Device in Logic
MONITORING AND MANAGING
DEVICES IN LOGIC
© 2012 – 2013 Sensus. All rights reserved.
PAMI-WGE-0065-01
Module Goals
Module
Goals
2
The goal for this module is to:
Introduce the features in Logic used by utility
personnel when handling customer calls and
requests and monitoring the meters.
Module Contents
3
Topics covered in this module include:
•
•
•
•
The Location Summary Report
Remote Actions
Meter Groups
Report Analytics
Section One
4
Introduction
Section One Objectives
5
Following this section, you should be able to:
1. Identify the core tasks of utility personnel in
Logic.
Getting Started
Introduction
Utility Service personnel handle a variety of requests,
such as:
• Why is my bill so high?
• How was my bill calculated?
• What are these additional charges?
• How do I shut off / startup my service?
• Can you please read my meter now?
• I think I have a leak. What should I do?
6
What’s Ahead
Introduction
Using the
Location
Summary
Report
• Summary of data on
one screen
• Sensus Logic Web
Performing
Remote
Actions
Using
Meter
Groups
Report
Analytics
7
•
•
•
•
•
• On Demand Reads
• Remote Connect
• Remote Disconnect
• View
• Create
Communications
Meter Exceptions
Meter Reads
Meter Events
Conservation
Section Two
8
Using the Location
Summary Report
Section Two Objectives
9
Following this section, you should be able to:
1. Access the Location Summary Report.
2. Given a Location Summary Report, identify the
contents of the screen.
3. Access Sensus Logic Web to view meter data.
Describing The Location Summary Report
Using the Location Summary Report
• Combination of reports and
graphs displayed in a
dashboard format
• Provides a quick view of the
overall meter health
• Problems or issues
prominently display on this
screen
• Collapsible panels within
one screen
• Accessed under Reports >
Dashboards > Location
Summary
10
Accessing The Location Summary Report
Using the Location Summary Report
1. Log in to Logic
2. From the Menu select Reports > Dashboards >
Location Summary Report
3. Enter the Location Number or Meter ID, if unknown,
perform a search using the Location Picker or Meter
Picker
4. Click Submit to display the Location Summary
Report
11
Describing the Location Summary Report Layout
Using the Location Summary Report
Location Details
Consumption
Map
Event Summary
Latest Register Reads
Latest Voltages
Tasks
12
30 Day Interval Read
Other Meter Data
Describing the Layout: Location Details Section
Using the Location Summary Report
• Top section of the Location Summary Report
• Provides key information about the location
–
–
–
–
–
–
–
13
Location Number: unique number to identify the address
Address: physical address of the location number
Location Class: Residential (RES) or Commercial (COM)
Billing Info: billing cycle for the location
Active Services: Electric (E), Water (W), Gas (G)
Active Meters: list of active meters for the location
Last Outage: date of the last outage at the location
Describing the Layout: Consumption Section
Using the Location Summary Report
• Located below Location Details
• Consumption graphs for all services at the location
• Displays Previous Week and Previous Year for each
service
• Identifies spikes or dips in usage
14
Describing the Layout: Map Section
Using the Location Summary Report
• Located below Consumption
• Pinpoints the location on a map
• Serves as a point of reference for the location
15
Describing the Layout: Event Summary Section
Using the Location Summary Report
• Lists all meter events for the location sorted by
Meter ID
• For each Event Type lists:
– Date of First Occurrence
– Date of Last Occurrence
– Total number of Occurrences
• Section is blank if no meter events have occurred
• Click on the Event Type link for event details
16
Describing the Layout: Register and Interval Read Section
Using the Location Summary Report
• Latest Register Reads by Meter ID includes for each
register read:
–
–
–
–
–
Channel ID
Read Date / Time
Read Value
Unit of Measure
Click Meter ID link for meter details
• 30 Day Interval Read Summary includes:
– Success read rate for each meter over a 30-day period
– Click Meter ID link to display the complete list of interval
reads
17
Describing the Layout: Latest Voltages / Other Meter Data
The Location Summary Report
• Latest Voltages lists the most recent voltage readings
A blink count is
sorted by Meter ID and includes:
– Read Date / Time
– Voltage Minimum, Maximum and Average
– Click Meter ID link for meter details
a notification of
a momentary
interruption of
service (outage)
• Other Meter Data lists the recorded blink count for a
meter sorted by Meter ID and includes:
– Value Type
– Value Date/Time, Quantity and Unit of Measure
– Click Meter ID link for meter details
18
Describing the Layout: Tasks Section
Using the Location Summary Report
• Lists all tasks assigned to the location
• Only displays if a task is associated with the location
number or meter ID
• Click the Tasks header link to open the Task Manager
and view the task details
19
Accessing Sensus Logic Web
Using the Location Summary Report
• Accessible in Logic via:
– Meter Data > Web Presentment
– Quick Launch icons after selecting a meter
– Consumption Section of Location Summary report
• Opens in a new window
• Used to view historical meter data in easy to read
graphs and charts
20
Adjusting the Sensus Logic Web Display
Using the Location Summary Report
Navigate to
additional
graphs and
reports using
the menus
Zoom In to view data
with a shorter time
span and higher data
resolution
Zoom Out to
view
datadata
for for
a
View
longer
span
antime
earlier
or
Split
the
screen
with lower
data
laterIcon
time
toresolution
compare two
explanations
period
graphs
21
Scenario 1: High Electric Bill
Using the Location Summary Report
Customer John Johnson calls Customer Service. The
customer states he has just received his electric bill and
it is much higher than the previous month’s bill.
Why?
22
Scenario 1: Resolution Steps 1-3
Using the Location Summary Report
1. Perform a search using the Location Picker and Mr.
Johnson’s address.
2. Access the Location Summary Report using the
Location Number.
3. Navigate to the Electric Consumption section of the
Location Summary Report and review the previous
week’s consumption graph. Are there any spikes in
usage?
23
Scenario 1: Resolution Steps 4-6
Using the Location Summary Report
4. Click on the previous week’s consumption graph to
open Sensus Logic Web.
5. Review the customer’s consumption by scrolling to
view usage for the billing timeframe.
6. Zoom in on the graph to view the interval reads and
pinpoint any spikes in usage.
Zoom In to view data
with a shorter time
span and higher data
resolution
View data for
the time period
in question
24
Scenario 1: Answer
The Location Summary Report
The customer shows high usage for a time period,
resulting in the higher bill.
25
Questions
26
Learning Check
27
Question:
1. How is the Location Summary report accessed
in Logic?
a)Reports>Dashboards>Location Summary
report
b)Reports>Maps>Location Summary report
c)Actions>Reports>Location Summary report
d)Task Manager>Reports>Location Summary
report
Learning Check
28
Question:
2. What area of the Location Summary Report
provides a graph of usage by Previous Week
and Previous Year?
a)Event Summary
b)Consumption
c)Reads
d)Map
Learning Check
29
Question:
3. Identify the following section of the Location
Summary Report.
Location Details
Learning Check
30
Question:
4. Which section of the Location Summary report
is referenced to determine if a power failure
occurred?
a)Event Summary
b)Consumption
c)Tasks
d)Other Meter Data
Learning Check
31
Question:
5. A customer calls inquiring about the validity of
the last meter read. What section(s) of the
Location Summary Report contains this
information?
a) Location Details
b) Event Summary
c) Latest Register Reads and 30 Day Interval
Read Summary
d) Consumption
Section Three
32
Performing Remote
Actions
Section Three Objectives
33
Following this section, you should be able to:
1. Define a remote action in Logic.
2. Identify the three remote actions performed in
Logic.
3. Recognize when to perform a remote action in
Logic.
4. Perform an on demand read using Logic.
5. Perform a remote connect using Logic.
6. Perform a remote disconnect using Logic.
Defining Remote Meter Actions
Performing Remote Actions
• Actions taken directly on the meter or its associated
valve through the FlexNet (AMI) system
• Performed on one meter at a time
• Occurs immediately in real time, with high priority
• Remote actions in Logic are —
– On Demand Read (water, gas and electric)
– Remote Connect (electric)
– Remote Disconnect (electric)
34
Describing On Demand Meter Reads
Performing Remote Actions
• Provides a current or historical interval or register
read for a specific meter
• Helps to diagnose a problem with a meter that:
– is not recording reads or is unreachable
– has missing reads or has a reading outside the normal
range
• The read results can be inserted into read tables in
Logic
Refer to the Logic
Reference Manual
for detailed steps
on inserting the
results and running
the VEE process
35
Performing On Demand Meter Reads: Steps 1-3
Performing Remote Actions
1. Select Actions > Meters > On Demand Read
2. Enter the Meter ID or select it using the Meter Picker
3. Click Submit
36
Performing On-Demand Meter Reads: Step 4
Performing Remote Actions
A confirmation message displays.
4. Click OK to perform the on demand read
Results show when
the read occurred and
the read values for
each available channel
Optionally, the read
data can be inserted
into Logic
37
Describing a Remote Connect
Performing Remote Actions
• Used to connect or reconnect a disconnected meter
when starting or re-establishing service for a
customer
• An on demand read is performed automatically after
connecting the meter
• The read results can be inserted into Logic
A meter must
have the ability
(a valve ) to be
remotely
connected /
disconnected
38
Performing a Remote Connect: Steps 1-3
Performing Remote Actions
1. Select Actions > Meters > Remote Connect
2. Enter the Meter ID or select it using the Meter
Picker
3. Click Submit
39
Performing a Remote Connect: Step 4
Performing Remote Actions
A confirmation message displays
4. Click OK to perform the remote connect
Optionally, the
read data can
be inserted
into Logic
40
Results show when
the connect
occurred and the
results of the on
demand read
Describing a Remote Disconnect
Performing Remote Actions
• Used to disable service, due to a non-payment or
switch in service, or to ensure safe shut-off in case of
emergency
• An on demand read is performed automatically prior
to disconnecting the meter to obtain a final meter
read for billing
• The meter remains operational in the network and
events (such as tamper) are still monitored for the
A meter must
meter
have the ability
(a valve ) to be
remotely
connected /
disconnected
41
Performing a Remote Disconnect: Steps 1-3
Performing Remote Actions
1. Select Actions > Meters > Remote Disconnect
2. Enter the Meter ID or select it using the Meter
Picker
3. Click Submit
42
Performing a Remote Disconnect: Step 4
Performing Remote Actions
A confirmation message displays.
4. Click OK to perform the remote disconnect
Optionally, the
read data can
be inserted
into Logic
43
Results show when
the disconnect
occurred and the
results of the on
demand read
Questions
44
Learning Check
45
Question:
1. Which of the following best describes a remote
action?
a)An action taken directly on the meter
through the FlexNet (AMI) system.
b)An action taken on a meter that generates a
customer bill.
c)An action that results in a meter read.
d)An action taken on a meter that is a located
outside of a 5 mile radius.
Learning Check
46
Question:
2. The on demand, remote connect and remote
disconnect procedures are located under which
menu in Logic?
a)Meter Data > Processes
b)Actions > Meters
c)Task Manager > Reports
d)Reports > Meter Reads
Learning Check
47
Question:
3. Which of the following action(s) perform a meter
read?
a)On Demand
b)Remote Connect
c)Remote Disconnect
d)All of the above
Learning Check
48
Question:
4. On demand read, remote connect and remote
disconnect actions give the option of inserting
the read data into Logic as a raw register read
and running the meter read data through the
validation process.
a) True
b) False
Section Four
49
Using Meter Groups
Section Four Objectives
50
Following this section, you should be able to:
1. View a meter group in Logic.
2. Create a meter group in Logic.
3. Use a group to display meters on a map.
Defining Meter Groups
Using Meter Groups
• Combines multiple meters into one identifiable
group, for example
– Geographic area
– Commercial or Residential
– Meter Type
• Used for filtering meter lists using
– Meter Search
– Reports
– Map Display
• Accessed in Logic using
Setups > Item Groups
51
Only the
Operator and
Admin roles
have access to
Setups > Item
Groups
Defining Item Groups
Using Meter Groups
• Items represent core items in Logic, i.e. meters, collectors
etc. or user defined items
• Created using Add Item Group and Structured Query
Language (SQL)
• Meter Groups are Item Groups created using Refer to the
Logic Reference
– Setups > Item Groups > Add Item Group
Manual or User
• SQL statements
– Setups > Item Groups > Add Meter Group
• User-friendly drop-down box selection
Guide for
information on
Item Groups
• Add Meter Group is the preferred method for ease of use
• Groups are dynamic; updated automatically based on the
specified criteria
52
Creating a Meter Group: Steps 1-2
Using Meter Groups
1. Select Setups > Item Groups > Add Meter Group
2. Enter a Group ID (used to identify the group)
53
Creating a Meter Group: Step 3
Using Meter Groups
3. Select the desired filters for the Meter Group
—
—
—
—
—
—
Meter Types
Location Classes
Commodity Type
AMI ID
Billing Cycle
Geographical
Location*
*Select the latitude and
longitude range by
clicking Select Using Map
54
Creating a Meter Group: Steps 4-5
Using Meter Groups
A new window opens displaying the Map Range Picker
4. Using the mouse, click and drag on the map to draw
a rectangle defining the range
5. Click OK
55
Creating a Meter Group: Steps 6-7
Using Meter Groups
6. Optionally, click View to display a list of meters in
the group or Test to confirm the meter group is
configured
7. Click Save to create the meter group
56
Questions
57
Learning Check
Question:
1. True or False?
A meter group combines multiple meters into
one identifiable set used for filtering.
True.
58
Learning Check
59
Question:
2. What is an easy method for defining a group of
meters by geographical location?
a) Enter the latitude and longitude coordinates
b) Use the Map Range Picker
c) Add each meter Id to a group
d) Meter groups can not be defined by
geographical location
Section Five
60
Report Analytics
Section Five Objectives
61
Following this section, you should be able to:
1. State how to access communications, meter
exceptions, meter reads, meter events and
conservation reports in Logic.
2. Describe the meter events reports used by
utility personnel in Logic.
3. Identify the three meter exception reports used
by utility personnel in Logic.
4. State the purpose of the meter read reports
used by utility personnel in Logic.
5. Identify the report used to monitor high water
usage.
Describing Logic Reports
Report Analytics
• Logic is a data analytics software application
• Reporting function parses and conveys the meter
read data into a usable report format
• Used in monitoring meter status, researching and
analyzing errors, trends and meter operation issues
• Also used in resolving customer issues
• Commonly used reports are located
in the Reports menu
62
Defining Commonly Used Reports
Report Analytics
• Communications: intermittent or noncommunicating meters
• Meter Exceptions: missing reads or irregular
consumption
• Meter Reads: the success and failure of reads
63
Defining Commonly Used Reports (continued)
Report Analytics
• Meter Events: operating of normal operation, e.g.
power fail
• Conservation: reporting high levels of water
consumption
64
Monitoring Non-Communicating Meters
Report Analytics
• Meters communicate with Logic through the FlexNet
system
• One form of this communication is a meter read
• Meter reads are scheduled to occur on a regular
basis
• If a meter is not recording a read, this is reported as
a non-communicating meter
65
Four Meter Communication Reports Available
Report Analytics
• Two Summary reports
– Meter Non-Communication Summary
– Meter Intermittent Communication Summary
• Two Detail reports
– Meter Non-Communication Listing
– Meter Intermittent Communication Listing
66
Defining the Meter Non-Communication Summary Report
Report Analytics
• Lists the number of
meters that have not
communicated within
specified time frame
or have never
communicated
• Provides the option to
open the Meter NonCommunication Detail
report by selecting the
meter link
67
Generating the Meter Non-Comm Summary Report
Report Analytics
• Select Reports > Communications > Meter NonCommunication Summary
Click on the #
of meters to
open the detail
report
68
Analyzing Results: Meter Non-Comm. Summary Report
Report Analytics
In this example,
2 meters did not
communicate in
the last 24 hours
69
Look at the Days Since
Last Data Received to
determine the total
time the meter has
been unreachable
Defining the Meter Intermittent Comm. Summary Report
Report Analytics
• Lists the number of meters that have failed to
communicate over the last thirty days and the
number of days in which they did not communicate
• Links to the Intermittent Meter Listing report
detailing the meters
70
Generating the Meter Intermittent Comm. Summary Report
Report Analytics
1. Select Reports > Communications > Meter
Intermittent Comm Summary to run the report
2. Optionally, enter search criteria, in this example
Commodity Type E (electric)
3. Click Go
Click on the # of
days to view a list
of meters that
met this criteria
71
Analyzing Results: Intermittent Meter Listing
Report Analytics
• In this example, 100 meters failed to
communicate 3 times in the last 30 days
72
Monitoring Meter Exceptions
Report Analytics
• Meters operating outside of the normal mode of
operation create an exception
• Examples of meter exceptions in Logic are meters:
– Missing interval or register reads
– Registering irregular consumption i.e., zero or continuous
73
Defining Meter Exceptions Reports
Report Analytics
• There are eleven meter exception reports in Logic
– Unknown Meters Reports: lists meters not configured in
meter setups
– Interval No Register Report: lists raw interval read values
but no register reads for a specified meter
– Register No Interval Report: lists register reads but no
interval reads for a specified meter
– Meters Missing Register Reads: lists all meters with missing
register reads
– Meters Missing Interval Reads : lists all meters with missing
interval reads
Refer to the Logic User Guide for
the detailed steps on running the
Meter Exceptions reports.
74
Defining Meter Exceptions Reports (Continued)
Report Analytics
– Register Reads Per Day: not reporting the expected volume
of reads
– Meters with Estimated Intervals: meters using estimated
intervals for billing
– Vacant Consumption Report: vacant meters reporting
consumption
– Zero Consumption Report: active meters reporting zero
consumption
– Continuous Consumption Report: meters reporting
continuous consumption for an extended period of time
– Meters Failing Validation: meters that failed a specified
validation routine
Refer to the Logic User Guide for the
detailed steps on running the Meter
Exceptions reports.
75
Defining the Meters Missing Register Reads Report
Report Analytics
• Lists the number of meters that failed to return an
expected read for a specified date
• Provides the option to open the Raw Register Reads
or Processed Register Reads by selecting the link
76
Generating Meters Missing Register Reads: Steps 1-3
Report Analytics
1. Select Reports > Meter Exceptions > Meters
Missing Register Reads
The date field is
automatically
populated with
the current date
2. Enter any additional search criteria, in this
example commodity type E
3. Click Submit
77
Generating Meters Missing Register Reads: Search Results
Report Analytics
The search results display
78
Generating Meters Missing Register Reads: Step 4
Report Analytics
4. To view the register reads or processed register reads
for a specific meter, click the corresponding link
79
Viewing Report Results: Meters Missing Register Reads
Report Analytics
• The Meters Missing Register Reads report is sorted
Links to
by Meter ID and includes:
View Raw &
Meter ID
Meter
Name
First and
Channel Meter Last Data
ID
Type Time Stamp
Available #
of Reads
Expected #
of Reads
Processed
Register
Reads
Click on any of
the column
headers to sort
the report.
80
Analyzing Report Results: Meters Missing Register Reads
Report Analytics
In this example, comparing
the available and expected
reads columns, shows
Meter ID 100051 was
expected to return one
read on 10/25/12 and did
not return a read.
Select the View
Processed Register
Reads link
81
Analyzing Report Results: Processed Register Reads
Report Analytics
The View Processed
Register Reads link opens a
separate window which
details three processed
register reads for the meter
from 10/22/12 - 10/29/12;
all passed validation
82
Monitoring Service Levels
Report Analytics
• Service Level Agreement percentages are programmed
in Logic and display in the meter reads reports
• The meter reads reports convey:
– Successful and failed register and interval reads
– Required and achieved service levels
– Validation failures (register and interval reads)
83
Defining Meter Reads Reports
Report Analytics
• There are five meter reads reports in Logic
– AMI Service Levels: percent of successful reads, required
service levels and achieved service levels
– Register Status Report: percent of passed/failed register
read validations
– Interval Status Report: percent of passed/failed interval
read validations
– Register Validation Failures: lists register read failed
validations
– Interval Validation Failures: lists interval read failed
validations
Refer to the Logic User
Guide for the detailed
steps on running the
Meter Reads reports.
84
Defining the AMI Service Level Report
Report Analytics
• Displays the percentage of successful reads
separated by interval and register reads
• Provides the option to open the Register Status or
Interval Status report by clicking on the report date
85
Generating the AMI Service Level Report: Steps 1-3
Report Analytics
1. Select Reports > Meter Reads > AMI Service
Level Report
The date field is automatically populated
with the current date
2. Enter any additional search criteria
3. Click Submit
86
Generating the AMI Service Level Report: Search Results
Report Analytics
The search results display
87
Generating the AMI Service Level Report: Step 4
Report Analytics
4. To view the interval or register reads report for a
specific date, click the corresponding link
88
Viewing Report Results: AMI Service Level Report
Report Analytics
• The AMI Service Level report displays the results in
two tables, Interval Reads and Register Reads.
• Each table is sorted by report date (most recent date
first) and includes:
Time
Frame
89
Report
Date
Expected
Reads
Available
Reads
Required and
Achieved
Service Level %
Result
(Pass or Fail)
Analyzing Report Results: AMI Service Level Report
Report Analytics
• The required service level is programmed in Logic
and is the threshold used in determining the
Pass/Fail status
• The achieved service level is calculated by dividing
the available reads by the expected reads
The fields of interest are the
required and achieved
service levels and the result.
In this example, the interval reads report dated 7/17/12 returned 2686
available reads and 2784 expected reads. The achieved service level is
96.48% (2686/2784), below the 97% required, resulting in a Fail status.
90
Monitoring Meter Events
Report Analytics
• A meter event is an
occurrence outside normal
meter operation such as:
– Power Fail
– Meter Tamper
– Leak
• Two types of meter event
reports in Logic:
– Meter Event Query provides
details about the event
– Event Type Summary provides
a summary of each event
91
Defining the Event Type Summary Report
Report Analytics
• Lists a summary of each meter event for the
specified search criteria
• Provides the Quick Launch icons for linking to
additional reporting options
92
Generating the Event Type Summary Report: Steps 1-3
Report Analytics
1. Select Reports > Meter Events > Event Type
Summary Report
The date fields are automatically populated with the current
date as the End Date and two months prior as the Start Date
2. Enter any additional
search criteria
In this example,
the Event Type Leak
3. Click Submit
93
Generating the Event Type Summary Report: Search Results
Report Analytics
The search results display
The results can
be exported to
Excel or PDF
format
94
Generating the Event Type Summary Report: Step 4
Report Analytics
4. To view further information on a specific meter,
select the checkbox preceding the Meter ID and
a Quick Launch icon
Quick Launch Icons
95
Viewing Report Results: Event Type Summary Report
Report Analytics
• The Event Type Summary report displays the results
sorted by Meter ID and includes:
Click on any of
the column
headers to sort
the report.
Meter
ID
96
Meter
Name
Commodity
Type
Event
Type
Date of First
and Last
Occurrence
Total # of
Occurrences
Analyzing Report Results: Event Type Summary Report
Report Analytics
In this example, Meter ID
W18000028 experienced a
leak event four times. The
first occurrence of the leak
was 5/22/12 and the last
occurrence was 5/25/12.
97
Checking for High Water Usage
Report Analytics
• High Water Usage report in Logic lists meters with a
high level of water consumption during specified
times
• Used to identify
– High water usage
– Water restriction violators
– Leaks
• Accessed under
Reports > Conservation >
High Water Usage
98
Generating High Water Usage Report: Step 1
Report Analytics
1. Select Reports > Conservation > High Water Usage
99
Generating High Water Usage Report: Steps 2-6
Report Analytics
2.
3.
4.
5.
6.
Select the Hourly Consumption Threshold
Select a Date Range
Select the Time and Dates for Water Restrictions
Enter any additional search criteria
Click Submit
Threshold of
1 cubic meter
Time restriction of
Monday
100
Date Range of
7/17/12 –
7/31/12
Viewing and Analyzing Report Results: High Water Usage
Report Analytics
• The High Water Usage report displays the results in
table format
• In this example, the results display any meter
reporting an hourly consumption exceeding 1
cubic meter on Monday for the time period of
07/17/12 to 07/31/12
101
Questions
102
Learning Check
103
Question:
1. Under what menu do you access reports on
meter reads, meter exceptions and meter
events in Logic?
a)Reports
b)Meter Data
c)My Menu
d)Actions
Learning Check
104
Question:
2. Complete the following statement:
Reads
Meter ____________
reports communicate
the success and failure of register and interval
reads and the service levels.
Learning Check
105
Question:
3. What type of reports provide information on
brown outs or power failures?
a)Meter Exceptions
b)Meter Reads
c)Meter Events
d)Meter Data
Learning Check
106
Question:
4. Match the following meter exception reports
with the corresponding definitions.
a)Vacant
b Active Meters not
___
Consumption
reporting consumption
b)Zero
___
c Active meters reporting
Consumption
constant consumption for
an extended period of time
c)Continuous
a Inactive Meters reporting
Consumption ___
consumption
Learning Check
107
Question:
5. Which of the following reports is used to view
water usage restriction compliance?
a) Outage Listing
b) High Water Usage
c) Continuous Consumption
d) Meter Event Query