Transcript Objective

SATELLITE MIGRATION PROJECT
Contractor Orientation
2
SATELLITE FREQUENCY
DAW-Mini 4400/5400
1. Press “menu” button and select
“installation”.
2.
Go to “factory reset” and press “ok”.
3
SATELLITE FREQUENCY
DAW-Mini 4400/5400
3. Enter “access code”, default is “1234”.
4. Select and press “ok”, wait for the
Philippine Multi-Media System, Inc.
Logo.
4
SATELLITE FREQUENCY
DAW-Mini 4400/5400
5. The “first installation” prompt will
appear, press “ok”.
6. Under “equipment” menu, select
“none” and press “ok”.
5
SATELLITE FREQUENCY
DAW-Mini 4400/5400
7. Under “channel search menu”, select
“manual” by pressing “green button”
on the remote control.
8. Select “Add TP” by pressing the “blue
button” on the remote control.
6
SATELLITE FREQUENCY
DAW-Mini 4400/5400
9. Select row of added TP (with check)
and go to “freq” column, press “ok” to
edit frequency.
10. Enter new frequency “12390” and
press “ok”.
7
SATELLITE FREQUENCY
DAW-Mini 4400/5400
11. Go to “S/R” column, press “ok” to edit
symbol rate. Enter symbol rate
“25600” and press “ok”.
12. Go to “pol” column, press “ok” to edit
polarity to “v” (vertical).
8
SATELLITE FREQUENCY
DAW-Mini 4400/5400
13. Repeat steps 8-12 but enter the
frequency “12430” in step 10.
14. Repeat steps 8-12 but enter the
frequency “12470” in step 10.
9
SATELLITE FREQUENCY
DAW-Mini 4400/5400
15. Press “exit” on remote. Select
“network” by pressing “yellow button”
on the remote control.
16. Unit will perform “channel scan”,
after completion press “exit”.
10
SATELLITE FREQUENCY
DAW-Mini 4400/5400
17. A “warning” prompt will appear, press
“ok” to save.
18. Press “exit” to view channels.
11
FORMS & FORMATS
JOB ORDER FORM
Control No.:
Installer Name :
Dealer :
Subscriber Name :
Subscriber Contact No. :
Address :
Items Replaced :
Low Noise Block (LNB) Converter
Others :
Antenna Dish
Bracket
RG-6 Cable
I certify that that the Out-Door-Unit (ODU) has been re-aligned/relocated and my unit is working properly.
Subscriber/Representative Name & Signature