Transcript FO Fiberliner E1.1

R&M Fiberliner
LAN / WAN applications
1
R&M Fiberliner - Contents of this presentation
 R&M 19” Fiberliner’s features
 Integration in 19” Foccos
 LAN / WAN applications
 Features and Benefits
 Competition
2
R&M Fiberliner Just one module - but backwards compatible!
1st generation
2nd generation
FO
Compact Module
19” 3U Breakout
Insertion
19” Fiberliner
spliced
19” Fiberliner
preassembled
3
Integration into R&M 19” Foccos System
4
R&M Fiberliner - Features and Benefits
R&M splice tray
Uniform
labelling
Only one screw driver
needed to dismantle
the splice tray and the cover
Snap-in front
panels
5
R&M Fiberliner - Splice tray holder
Fixes the splice tray, simplifies
the replacement of pigtails
6
R&M Fiberliner - Snap-in front panels
 Permit a fast and simple
expansion and fitting of
SCcompact, SC, ST, FC-PC,
LSA, and LSH optical fiber
adapters
 All front panels with 12-parts
division
 Snap-in front panels
7
R&M Fiberliner - Cable entry
 Optional cable entry,
45° or 90° for breakout cable
up to 20 mm diameter
Up to 20 mm
in diameter
 Optional cable entry,
45° or 90° for loose tubes
Up to 10 mm
in diameter
8
R&M Fiberliner - Integration in 19” Foccos
19” 3U FO Global Rack
19” 1U Contact Drawer
19” 1U Cable Guide
19” 1U Patch Cable Drawer
19” 3U Global Patch Panel
19” 1U or 2U Jumper Plastic
Ring Panel
19” 1U Sub-rack
Mounting Set for Cable Feed
Cable Clamping Device
9
R&M Fiberliner - Integration in 1U / 3U sub-rack
 19” 3U FO-Global Rack
for 120 FO connections
 19” 1U sub-rack for
36 FO connections
10
R&M Fiberliner - R&M freenet compatible
Easy integration with
connection module
holder RJ 45
Up to 6 adapter housings
for pre. or spl. version
per 19” 3U patch panel
11
R&M Fiberliner - LAN-WAN applications
19” slide-in unit
LAN area
Breakout version
WAN area
Splitter version
Splice version
12
R&M Fiberliner - Breakout version
 For carrying pre-assembled or
field assembled breakout cables.
 Used in structured cabling
systems especially in the riser
zone wiring.
13
R&M Fiberliner - Splitter version
 R&M Fiberliner can be fitted
with a splitter cassette.
(Max. dimensions: 192 x 92 x 8 mm)
 Can be used in television
distribution and telecom
networks to have information
distributed on several optical
fibers.
14
R&M Fiberliner - Splice version
 For holding the R&M splice
tray.
 Can be used in telecom and
television networks as cable
termination of FO point-to-point
connections.
15
R&M Fiberliner - Fiberliner single parts
19“ slide-in unit
FO splice cassette
Cover for
FO splice tray
Small parts: Cable tie,
pigtail holder,
knurled screw,
insert hinge large,
red, and
designation strips.
Front panels
16
R&M Fiberliner - Features and Benefits
 Competitive price
 Can be used in R&M 1U and 3U patch panels
 Integrated R&M splice tray
 Compatible with R&M freenet RJ45 standard swivel units
 Simple and cost saving installation
 Backwards compatible with the 1st generation compact module
17
R&M Fiberliner - Competition
Points
Huber + Suhner
Brugg
Telecom
Siecor
R&M
Fiberliner
Maximum capacity on 3U
144 Fibers
120 Fibers 72 Fibers 120 Fibers
Snap-in front panel,
splice-tray and cover
No
No
No
Yes
Can be used as Breakout No
Version
No
Yes
Yes
Optional cable entry
45° or 90°
No
No
No
Yes
Cable tension relief
at the Modul
Yes
Yes
No
Yes
Uniform labelling
Yes
Yes
No
Yes
Simple interchance of
pigtails
No
No
No
Yes
18
R&M Fiberliner - Operating instruction
19