Transcript IntelaTrac 4.2

Slide 1
IntelaTrac Hardware
Presented by Mark Wolfe
© 2012 Invensys. All Rights Reserved. The names, logos, and taglines identifying the products and services of Invensys are proprietary marks of
Invensys or its subsidiaries. All third party trademarks and service marks are the proprietary marks of their respective owners.
Invensys proprietary &
©
Sl
Agenda
Introduction of new devices available in IntelaTrac 4.2
• Intermec CN70
• Juniper Mesa
New devices coming in a future IntelaTrac version
RFID with IntelaTrac
Open discussions
• Future of Mobile devices in your plant
• Future and current use of measurement peripherals
Slide
3
Slide 3
IntelaTrac 4.2
Hardware
Slide 4
Intermec CN70
• Device intended to
replace the CK61
• RFID: Internal or
Snap-On
• Available with
GOBI
communications
• Rated Class 1 Div 2
• IP 67
Slide 5
Juniper Mesa
• 5.7” VGA screen
• Windows
Embedded
Handheld 6.5
• Available with GSM
communications
• Rated Class 1 Div 2
• IP 67
Slide 6
Available in a
Future Version
Slide 7
Motorola/Bartec 9500 & MC75A
• Device replaces the
MC9090 and MC70
• RFID: Snap-On
• Available with GSM
or CDMA
communications
• Rated Class 1 Div 2
• IP 67 & IP 54
Slide 8
ECOM i.roc® CI70
ATEX Zone 1 and
Class 1 Div 1
RFID: Internal
Uses the Intermec
CN70 as a platform
Slide 9
Bartec 9090
• Continues for 6-9
months
• RFID: Internal
• Rated Class 1 Div 1
Slide 10
Airo I-Safe 28
• Device replaces the
current Airo A25
• RFID: Snap-On
• Available with GSM
or CDMA
communications
• Rated Class 1 Div 1
Slide 11
Changes in RFID functionality
for IntelaTrac
Uncovering the Black Magic
Slide 12
Current State of IntelaTrac RFID
.STO and .STU formats allow Read/Write capability
Invensys Patented technology to decode information on the RFID tag
Customized for each customer
Low Frequency (LF) - 134 kHz Read/Write
Configurable with up to 1000 bytes of data stored on the LF tags with
.STO and .STU formats
IntelaTrac Functionality
Allows a user to unlock a Task or Task Group for answer in a Procedure
Allows a user to Read and Write data back to the RFID
Slide 13
S
Direction of IntelaTrac RFID
Ultra High Frequency (UHF) RFID will become the main RFID capability
Read only using the Gen II EPC preformatted tags
Read/Write using .STO and .STU formats
Reasoning:
A large number of customers did not do as much up front planning
when it came to RFID in their system as we originally thought they
would. The tags would be formatted with an Asset name from the
IntelaTrac system and then be placed in the field.
EPC = Asset name
This maintains the IntelaTrac functionality within the application.
Slide 14
UHF RFID Process
Create Asset List
Slide 15
Assign EPC to
Asset
Place RFID tags
in the Field
Run IntelaTrac
RFID Rail Car Integration
Allows the configuration of Tasks within Procedure Builder to accept
input from the Transcore Encompass 1i RFID reader
Slide 16
Open Discussion
• Future of Mobile Devices in
your plant
• Future and current use of
measurement peripherals
Slide 17
Slide 18