Transcript The Panel 3 Course Even Butt with Flush Even Butt Corners

1
Manufacturers Reserve Supply
Maibec Industries
2
What Others Want To Be
MAIBEC
MAINE + QUEBEC
MAI NE + QUE BEC
3
Maibec Industries

Produces 2 major product groups
distributed by MRS
Wood Shingles

Eastern White Cedar

Solid Wood Siding

Eastern Premium Spruce

4
Factory – Stained
SOLID WOOD SIDING
5
When you want wood,
buy wood!
WOOD…
Natural
Renewable
Sustainable
MAIBEC SIDING…
Beautiful
We’ll guarantee it!
Durable
Low Maintenance
6
MAIBEC WOOD SIDING
SINCE 1986
Quality Control from Start to Finish
 Sawing
 Kiln Drying
 Profiling
 Staining
 Packaging
 Shipping
7
SPF (Spruce-Pine-Fir)
A DURABLE SUBSTRATE

In House Lumber Manufacturing
 Maibec premium siding grade

Optimal Drying in Specie Specific Kilns
 Consistent moisture content
8



CHOICES AND MORE
CHOICES
Profile Dimensions


1 x 4, 1 x 6,
1 x 8, 1 x 10,
1/2x6
Random Lengths 4’
thru 16’
75% 12' to 16'
9
MAIBEC’S got you covered
Profile Selection
(smooth or rough face)

1/2x6 Clapboard
Unfinished or pre-finished
with 1 or 2 coats

Rabetted Bevel
1x4, 6 & 8 inch widths
Pre-finished only

ShipLap V-Joint
1x4, 6 & 8 inch
Pre-finished only
10
MAIBEC’S got you covered
Profile Selection
(smooth or rough face)

Channel
1x6 & 8 inch widths
Pre-finished only

Cove
1x6 & 8 inch widths
Pre-finished only

Board & Batten
1x10 boards and 1x2 battens
Pre-finished only
11
PICK A COLOR, ANY
COLOR



Cabot Factory Finish Stain
Unlimited Choice of Colors
No Minimum Order
Free Samples
Flow Coat Application
Oven Dried



The Cabot Factory Finish Process
3
2
The longevity and performance of any coating is greatly influenced by the
method of application.
Cabot Factory Finish is applied under factory-controlled conditions and
the most stringent quality control procedures are followed. All six sides of
the board, including the butt-ends, are completely covered ensuring the
ultimate protection from nature’s elements. The stain is then brushed
deep into the surface for maxi-mum penetration and is allowed to dry
thoroughly prior to leaving the factory, stabilizing the siding and
preventing possible shrinkage. The finished siding arrives at the
construction site totally protected from exposure to water and sunlight.
4
1 Controlled temperature and humidity levels stabilize any moisture in
the wood; application conditions are optimal.
2 The siding is fed into the machine applicator and flooded with Cabot
Factory Finish.
3 Pressure rollers spread the coating evenly.
4 High speed brushes drive the stain into all six sides of the wood for
maximum protection. Back-priming reduces shrinking and swelling
and improves the siding durability.
5 Proper spread rates and uniform colour coverage provide a beautiful
finish with the highest outdoor performance standards.
12
PROTECTING YOUR INVESTMENT
Superior Packaging



8 Pieces per Bundle
 Strapped bundles
 Tally Sheets
Polyurethane Sheet Between Each Siding
Piece
Paper Wrapped
13
TRIMS, MOULDINGS, AND
NAILS








PRE-FINISHED TRIM PACKAGES
1 x 6 Fascia Board
5/4 x 4 & 5 - Outside/Inside Corner
2 x 2 Inside Corner
5/4 x 7 Skirt Board
2 x 4 Universal I/S O/S Corner Board
Other Trim Items & Sizes Available
ACCESSORIES
Free Touch Up
Color Matched Maze Nails
 2“, 2-1/2” and 3" Individual
 2" Coil
14
The Trims
15
INSTALLATION
Wood nailing strips or Home
Slicker* are required for Maibec
warranted siding.
Joints must be placed on a nailing
strip, angling the two boards with 45º
mitre cut. End of boards must land
and be nailed into studs.
*Installation of Home Slicker according to Benjamin Obdyke’s
recommendations. Siding must be nailed directly to studs, using
Maibec nails, 16" on center.
17
Home Slicker™
by Benjamin Obdyke

-1/4” threedimensional nylon
matrix




Thermal break
Channels moisture away
Class A fire rating
Specified by
Architects
18
INSTALLATION
VERTICAL SIDING
•Nailing or furring strips need to be
installed at a 45º angle. This allows for
any moisture build up to flow down the
wall.
•The strips need to be installed at 12"
on center to ensure a 16" on center
nailing pattern on the siding.
19
INSTALLATION
Nailing
Channel, Cove, V-Joint
and Rabbeted Bevel
Board and Batten
4" AND 6“ SIDING
One nail
placed at 3/4"
to 1" from
the base of
the board.
Use two
nails at ¾“
to 1“ from
the edges
of the Board.
8" SIDING
Requires a
second nail
placed 2 ½”
from the top.
Use 1 nail
placed in the
middle of the
batten every
16" on center.
20
INSTALLATION
Endcaps on Siding Bundles with
Installation Requirements
21
22
Sample Procedure
•
Not required but recommended by Maibec and MRS
• Customer must furnish
• Stain manufacturer of desired color(s)
• Color, # coats, solid or semi-trans., smooth or rough face
• Name, address, telephone number and attention _____
• Customer will receive samples in approximately 1 week
• When end user approves samples, MRS must receive color #
shown on sample label as ‘CEL-0_ _ _ _ _ _ -_ _ ’
• Customer receives 1 gallon touchup free with 1000 bd. ft. +
• Maibec will finish shingles without the ‘CEL’ number but
MRS’ customer and the end user have no recourse
against Maibec and/or MRS regarding color
23
Answers to Shingle F.A.Q.
Hammer caps are furnished with prefinished nails to
prevent chipping finish off head of nails
 Samples of various profiles and colors are available using
the same procedure as the shingles. Shingles will
have a CEL # instead of a CEB #
 Maibec will match any color but will use Cabot Latex
Factory Finish stain
 Maibec will not apply semi-transparent finish to smooth
side of any siding product

24
Merchandising

Siding/Trim Display Board




Siding profiles
Trim profiles
Samples labeled with siding
and trim names and color
Siding/Trim Sample Box



Siding profiles
Trim profiles
Samples labeled with siding
and trim names and color
Literature
 Website - www.maibec.com

25
Factory – Stained
SOLID WOOD SIDING
When you want wood,
buy wood
26