Transcript Slide 1

Free Delivery on
Orders over
£100
Harry Mason Ltd
217 Thimble Mill Lane
Birmingham
B7 5HS
Buy Online or Call us direct
+44 (0) 121 328 5900
WWW.HARRYMASON.CO.UK
Dispensing Equipment
2-5
Vertical Ale Extractor
6-9
Laydown Dispense
10-11
Venting Equipment
12-14
Gas Accessories
15-16
Cellar Equipment
17-23
Bar Equipment
24-25
Cask Handling
26-27
Cooling Equipment
28-29
Spares
30-31
Cabinets
Harry Mason have been
making cabinet beer
engines for over 200
years.
We can manufacture any
Hand Pull cabinet to your
personal specification.
Cabinets can have solid
plinths or can be through
the bar units.
1 Pull
£214.20
216mm Wide
2 Pull
£428.40
369mm Wide
3 Pull
£642.60
521mm Wide
4 Pull
£856.80
673mm Wide
5 Pull
£1,071.00
825mm Wide
6 Pull
£1,285.20
978mm Wide
7 Pull
£1,499.40
1130mm Wide
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Dispense Equipment
2
Next Page
www.harrymason.co.uk
Shakespeare
The Shakespeare is a cylinderless unit
which is revolutionising traditional
dispense. It replicates the traditional
hand pull through the use of a damper
and a special on/off valve. It looks,
reacts and feels just like a traditional
hand pull. The Shakespeare needs to be
pump assisted and no check valve is
required. The benefits are the massive
savings on ullage/wastage during line
cleaning and because there is no
cylinder additional re-circ cooling is not
necessary.
1 Pull
£167.40
2 Pull
£334.80
3 Pull
£502.20
4 Pull
£669.60
5 Pull
£837.00
6 Pull
£1004.00
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Dispense Equipment
3
Next Page
www.harrymason.co.uk
Pullman
The Masons Pullman Clamp On
Beer Engine is the traditional
way of dispensing real ale. It is
available in ¼ pint or ½ pint
and standard or water cooled
cylinders. The aluminium
frame and solid brass parts
make this unit extremely
durable.
1 Pull
£173.40
2 Pull
£346.80
3 Pull
£520.20
4 Pull
£693.60
5 Pull
£867.00
6 Pull
£1,040.40
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Dispense Equipment
4
Next Page
www.harrymason.co.uk
The full range of Harry Mason
Hand Pulls are available as a
through the bar unit. The
Masons Through the Bar Unit
can replace your old Hand Pull
without needing the bar top
altered as Masons provide a
range of conversion kits which
will cover most other
manufacturers. Please call for
details on which units it can
replace.
Previous Page
Type
Price
Pullman
£173.40
Shakespeare
£152.40
Back to Front Page
+44 (0) 121 328 5900
Dispense Equipment
Through The Bar
5
Next Page
www.harrymason.co.uk
The Harry Mason Flexible Ale Extractor
has been engineered with practicality
in mind. The outlet contains a Non
Return Valve and a hop filter which
removes most sediment that could be
drawn from the barrel. When using the
flexible ale extractor the amount of
ullage/waste will be minimised in
comparison to other types of dispense.
The Flexible Extractor is available in
single and double outlet, ¾ BSP, L or Y
threads and all barrel sizes.
The Cleaning Kit comes complete with
3 different sizes of brush and a key for
removal of the Non Return Valve.
Previous Page
Single
Flexible Ale Extractor
£35.00
Double
Flexible Ale Extractor
£45.00
Spare Keystone
Bodies
£14.95
Cleaning
Kit
£4.95
Back to Front Page
+44 (0) 121 328 5900
Vertical Ale Extraction
Flexible Ale Extractors
6
Next Page
www.harrymason.co.uk
Flexible Ale Extractors
Spares
7
1.
Keystone Body
£14.95
2.
Blanking Plug and Washer
£2.50
3.
Cleaning Kit
£4.95
4.
Silicon Tube (Different Sizes available)
£1.95
5.
Single Outlet (3/4 BSP, Y or L Thread)
£10.00
6.
Double Outlet (3/4 BSP, Y or L Thread)
£15.00
7.
Mason’s Float
£5.95
4.
Spares
Spare Flexible Keystone Bodies are used to prepare the
following barrel that will need tapping and resting before
use. All other parts are also available, if you need help or
advice please contact our sales team.
6.
1.
2.
5.
3.
7.
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Next Page
www.harrymason.co.uk
The Rigid Ale Extractor is
the traditional way of
vertical dispense. Its
stainless steel tube reaches
the bottom of your standing
cask which saves on stillage
and racking expense. Very
popular in smaller cellars
these extractors come with
single or double outlets , ¾
BSP, L or Y threads and one
size fits all barrels.
Single Ale Extractor
£24.95
Double Ale Extractor
£35.00
Spare Rigid Keystone Body
£14.95
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Vertical Ale Extraction
Rigid Ale Extractors
8
Next Page
www.harrymason.co.uk
Rigid Ale Extractors
Spares
9
1.
Keystone Body
£14.95
2.
Blanking Plug and Washer
£2.50
3.
Stainless Steel Keystone Body
£26.80
4.
Screw in Bottom Filter
£2.70
5.
Cleaning Brush
£1.85
6.
Keystone Body Pressure Sleeve
£0.63
7.
Keystone Body Rubber Pressure Ring £0.82
3.
Spares
Spare Rigid Keystone Bodies are used to prepare the
following barrel that will need tapping and resting before
use. All other parts are also available, if you need help or
advice please contact our sale team.
1.
4.
2.
6.
7.
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Next Page
www.harrymason.co.uk
Complete Cask Taps
Traditionally the barrel lies on a
stillage and is tapped with a cask
tap.
Harry Mason will supply the
complete tapping kit for fitting
your beer line. The complete Cask
Tap comes with a hop filter, nut
and tail.
Available in ¾ BSP, L or Y threads
and all Standard Beer Line Tail
Sizes
Previous Page
Single Cask Tap
£10.00
Double Cask Tap
£15.00
Back to Front Page
+44 (0) 121 328 5900
Laydown Dispense
10
Next Page
www.harrymason.co.uk
11
Laydown Dispense
Cask Taps
We provide a variety of different cask taps. Stainless
Steel Cask Taps are significantly more durable than the
plastic taps. The Wood Cask Tap is a disposable tap
ideal for beer festivals, it dispenses straight to the
glass.
Tap
Thread
Each
5+ Each
Single Plastic Tap
¾ BSP, L or Y
£8.20
£7.75
Double Plastic Tap
¾ BSP, L or Y £11.50
£10.00
Racking Tap
¾ BSP or Y
£9.95
£9.00
Wooden Tap
n/a
£2.85
------
Stainless Steel
Racking
n/a
£49.30
------
¾ BSP, L or Y £55.25
------
Stainless Steel
Straight
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Next Page
www.harrymason.co.uk
12
Cask Venting
Each
5+ Each
£6.00
£5.00
Bag of 50 Soft
Pegs
Bag of 50 Hard
Pegs
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Venting Equipment
The traditional way of venting a laydown cask is by
using hard and soft pegs, however Harry Mason
created the Autovent which contains a Non Return
Valve to provide an air tight seal to the beer. The
reusable Autovent only opens when the beer is
being drawn from the barrel and therefore does not
need changing between sessions.
£7.50
£6.50
Next Page
www.harrymason.co.uk
13
Cask Venting
The Stainless Steel Co2 Barrel
Spigot performs the same job
as the plastic one, however it
is a lot more durable.
Venting Equipment
Co2 Barrel Spigot gives you the
option to put Co2 on top of
your beer which extends the
life of the product.
Barrel Venting Punch is used
to break through the shive to
allow venting pegs or
autovents access.
Previous Page
Co2 Barrel Spigot
£5.30
Stainless Steel Barrel Spigot
£24.50
Barrel Venting Punch
£2.25
Back to Front Page
+44 (0) 121 328 5900
Next Page
www.harrymason.co.uk
14
Venting Equipment
The new Bung Extractor with
Acetal handle is now available.
This product is for use with a
rubber mallet and also has
spare tips available
The Barrel Vent Peg should be
inserted into the shive after
tapping the barrel to release
the condition of the beer. It
comes complete with tubing to
run overspill into a bucket.
Venting Equipment
Harry Mason offer the traditional
Shive Hammer for removal of the
bung. Spare tips are available and
are easily replaced.
The Non Choke Vent Peg has a
plunger to control the release
of pressure from the barrel.
Previous Page
Shive Hammer
£25.30
Spare Shive Tip
£8.20
Shive Removal Tool
£12.50
Barrel Vent Peg
£12.65
Non Choke Barrel Vent Peg
£23.75
Back to Front Page
+44 (0) 121 328 5900
Next Page
www.harrymason.co.uk
Gas Accessories
15
Option 1. Three 3/8 push
in John Guest fittings for
quick release.
Option 2. Two 3/8 push in
John Guest fittings and a
serrated tail for hose and
jubilee clip.
Gas Accessories
Harry Mason offer a full
range of Air Cocks for your
cellar gas ring main.
Option 3. Three serrated
tails for hose and jubilee
clips fittings.
Aircock 3 Push In 3/8 Fittings
£6.82
Aircock 2 Push In 3/8 Fittings
and a Serrated Tail
£6.82
Aircock 3 Serrated Tails
£6.82
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Next Page
www.harrymason.co.uk
Extractor Keystone Bodies can
have double outlets to allow
blanket pressure on the beer
which enhances the life of the
beer.
Available in stainless steel or
acetal these bodies fit all
standard extractors.
Cylinder Bottle brackets
are for safe storage of gas
cylinders and highly
recommended for Health and
Safety.
Gas Accessories
Gas Accessories
16
Cellar Spanners have dual
fittings. Gas and Beer Line
thread. Available in ¾ BSP or
Brewery Standard threads.
Co2 Keystone Body Plastic
£19.90
Co2 Keystone Body Stainless Steel
£29.90
Cylinder Bottle Bracket
£9.50
Co2 Spanner ¾ BSP or Y and L
£2.49
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Next Page
www.harrymason.co.uk
Cellar Equipment
A Rubber Mallet is needed in
any cellar that serves cask,
you need it to knock in
venting equipment, cask taps
or keystone bodies.
The Harry Mason Cellar Tidy
is a handy way to organise all
your cellar equipment with
different compartments to
hold mallets, cask taps, hop
filters, washers and venting
equipment.
Cellar Equipment
17
Cellar Thermometers are
crucial in assisting you
maintain the preferred
temperature of your cellar at
a glance.
Previous Page
Rubber Mallet
£5.78
Cellar Tidy
£32.90
Wooden Thermometer
£3.25
Plastic Thermometer
£2.10
Back to Front Page
+44 (0) 121 328 5900
Next Page
www.harrymason.co.uk
Starter Kits
Harry Mason offer complete starter kits that are ideal for
the licensees who are new to cask ale. We provide the
traditional laydown kit which has Cask Taps, Autovents
and Barrel Wedges.
Alternatively we have the Upright Dispense Kits which are
ideal for small cellars. The Upright kit contains a Flexible or
Rigid Ale Extractor along with all a cellar will require.
Laydown Starter Kit
£99.99
Upright Starter Kit
£99.99
Flexible Starter Kit
£99.99
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Cellar Equipment
18
Next Page
www.harrymason.co.uk
Nuts, Tails & Seals
Thread
Each
5+
Each
¾ BSP
£0.65
£0.60
Y Thread £0.65
£0.60
L Thread £0.65
£0.60
Thread
Each
5+
Each
¾ BSP
£0.60
£0.50
Y or L
Thread
£0.60
£0.50
Thread
10’s
¾ BSP
£1.00
Cellar Equipment
19
Y or L Thread £1.00
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Next Page
www.harrymason.co.uk
Hose Clips
With all types of beer dispense it is imperative that the beer
line is air tight to work properly. Failure to do this will result
in sucking air and fobbing of the beer. We offer a full range
of hose clips to fit all beer line sizes.
SIZE
TO SUIT HOSE
PRICE
12 Hose Clip
9.5mm - 12mm
£0.30
20 Hose Clip
13mm - 20mm
£0.30
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Cellar Equipment
20
Next Page
www.harrymason.co.uk
Hop Filters
Harry Mason has manufactured Hop Filters for over 100
years. The original brass mesh and leather has been
replaced by stainless steel and supple plastic. It fits on top
of the tail inside the nut and also helps seal the
connection. The filter prevents sediment from being
dispensed into the glass.
Threads
10’s
100’s
¾ BSP
£3.20
£30.00
L or Y Thread
£3.20
£30.00
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Cellar Equipment
21
Next Page
www.harrymason.co.uk
Turndown Spout
The Turndown Spout is
designed for dispensing
straight from a cask tap
into a glass. These are
available at a bend of 90 or
70 degrees
We also provide a
Turndown Spout with a
threaded end so you can
attach a sparkler if
required.
Threads
Tube Size
Each
5+ Each
¾ BSP
½”, 3/8” &
5/16”
£3.80
£3.50
Y or L
Thread
½”, 3/8” &
5/16”
£3.80
£3.50
Threads
¾ BSP With Sparkler
Ends
Y or L Thread With
Sparkler Ends
Previous Page
Tube Size
Each
½”
½”
£7.20
£7.20
Back to Front Page
+44 (0) 121 328 5900
Cellar Equipment
22
Next Page
www.harrymason.co.uk
Dipsticks
The Dipstick are printed so each side is specific to different
types of Barrels such as Firkin and Kilderkin. Please check
you purchase the correct dipstick for your method of
dispense.
Previous Page
Dipstick
Price
Upright
£6.75
Laydown
£6.75
Plastic Laydown
£13.50
Back to Front Page
+44 (0) 121 328 5900
Cellar Equipment
23
Next Page
www.harrymason.co.uk
24
Bar Equipment
Plastic Bar Drip Trays
available in Blue, Black,
Green, Yellow, Cream and
Brown 18” x 9”
We have a large range of Tap
Sparklers, such as the Standard
Adjustable Sparkler, Multibore
Sparkler with different hole
sizes, Creamflow and Guinness
Nozzles.
Spirit Strainer
£14.10
Drip Trays (Any Colour)
£3.63
Adjustable Sparkler
£0.49
Mulitbore White 0.6mm Holes
£0.99
Multibore Black 0.6mm Holes
£0.99
Multibore Black 1mm Holes
£0.99
Guinness Nozzle
£1.50
Creamflow Nozzle
£1.50
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Bar Equipment
Spirit Strainer
stainless steel 12” x 6”
Next Page
www.harrymason.co.uk
25
Bar Equipment
4” x 4” Drip Tray
£1.60
6” x 6” Drip Tray
£1.80
Bar Equipment
Harry Mason offer two sizes of drip
trays for clamp on beer engines and
fonts.
Masons have recently developed the
beer pump door handle. Brass finish
and durable acetal Handle.
Beer Pump Door Handle
Previous Page
Back to Front Page
+44 (0) 121 328 5900
£89.00
Next Page
www.harrymason.co.uk
26
Cask Handling
Cask Handling
All Harry Mason Equipment
conforms to the statutory
requirements for lifting
equipment. The hooks are
stamped with the safe working
load and a serial number for
complete traceability. Please
ensure that the product is
suitable for the required
application. Please complete a
risk assessment prior to use.
The Barrel Rope is made from
3 Strand Polypropylene 24mm
thick. Keep away from
bleaching agents and
industrial solvents. Breaking
Strain is 7600kg.
Previous Page
Barrel Carbine Hook
£7.95
Galvanised Open Hook
£17.50
Barrel Rope
£19.50
Back to Front Page
+44 (0) 121 328 5900
Next Page
www.harrymason.co.uk
Cask Handling
Harry Mason have two size
of Dray Pad (see below),
the interior is made from
multiple foam and rubber,
the exterior is a tough
plastic that is easily
cleaned with a damp cloth.
They conform to the BLRA/
HSE approved Code of
Practice.
The Cork Fill Drop Bag is
tough and durable, the
interior is filled with
whole corks. The outer
skin is a heavy duty
woven recycled plastic
fabric.
Previous Page
Cork Filled Drop Bag
£43.00
Dray Pad 600x600x300
£96.50
Cellar Pad 1000x1000x300
£200.00
Back to Front Page
+44 (0) 121 328 5900
Cask Handling
27
Next Page
www.harrymason.co.uk
Cooling Equipment
Cooling Equipment
The cooling probe is designed for
laydown dispense. After
removing the shive from the side
of the cask lower the cooling
probe through the shive hole.
Reseal using the cooling probe
body and dispense via the cask
tap normally.
The cooling probe is ideal for out
of cellar situations and can
control the temperature of the
cask.
28
Our basic competitive cooling probe is a
plastic shive with a rigid plastic tube. John
Guest 3/8 push in fittings are needed to
connect to the cooling system.
Pin Length Plastic Body
£21.50
Firkin Length Plastic Body
£22.50
Kilderkin Length Plastic Body
£23.50
Plastic Cooling Probe
£9.95
Previous Page
Back to Front Page
+44 (0) 121 328 5900
Next Page
www.harrymason.co.uk
Cooling Equipment
Cooling Equipment
Harry Mason offer a
complete stainless steel
cooling probe, this is a lot
more durable than our plastic
alternatives. Installation of
this cooling probe is different
too, once you have removed
the shive and lowered the
cooling probe in, use the
wings to tighten the seal to
cask and then open the mini
ball valve to vent the cask.
Stainless Steel Pin
£96.50
Stainless Steel Firkin
£97.50
Stainless Steel Kilderkin
£98.50
Previous Page
Back to Front Page
+44 (0) 121 328 5900
29
Next Page
www.harrymason.co.uk
30
Spares
Cylinders
Spare Cylinders are available for all Harry Mason
beer engines. Clamp on or Cabinet, 1/4pt or
1/2pt and standard or water cooled.
Dispense
Amount
Type of Unit
With or WithOut
Water Jacket
Price
¼ Pint
Single Pull
Without
£79.95
½ Pint
Single Pull
Without
£79.95
¼ Pint
Single Pull
With
£94.95
½ Pint
Single Pull
With
£94.95
¼ Pint
Cabinet
Without
£79.95
½ Pint
Cabinet
Without
£79.95
¼ Pint
Cabinet
With
£94.95
½ Pint
Cabinet
With
£94.95
Previous Page
Back to Front Page
Next Page
+44 (0) 121 328 5900 www.harrymason.co.uk
31
Handle
Spares
Handles
Price
Black Ceramic Handle
£9.90
Cream Ceramic Handle
£9.90
Off White Ceramic Handle
£9.90
White Ceramic Handle
£9.90
Hunting Scene Ceramic Handle
£13.25
Straight Black Handle
£15.00
Straight Chrome Handle
£24.95
Straight Black Handle Brass Rings
£19.95
Straight Black Handle Chrome Rings
£21.50
Wooden Truncheon Brass Ring
£17.90
Wooden Truncheon Chrome Rings
£19.95
Previous Page
Back to Front Page
Next Page
+44 (0) 121 328 5900 www.harrymason.co.uk