Transcript Internal Quality System Auditor Training Workshop

C&I
We are
A Primary
Standard NABL
Accredited
Laboratory
(A) NABL Accreditation at Lab and Site for :
a)
Energy & Power
b)
CT/PT, Open Access Connection Metering Unit
c)
Dead Weight Tester
(B) Transformer, CT/PT, Energy Meter, Conductor Testing
(C) NABL Accreditation at Lab and Site for Mechanical,
Thermal and Electro-technical
(D) Training and Consultancy
(E) Research and Development Centre
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
(A) C and I Calibrations Pvt. Ltd., Jaipur
FIRST
IN
INDIA
NABL Accredited Calibration Laboratory (NABL C-0768; lab
and site ) : Energy and Power
FIRST IN INDIA NABL accredited laboratory to calibrate the
reference meter of 0.02 Class at Site.
Equipped with COM 3003 Zera Germany, master with direct
traceability to NPL India and DKD Germany.
Calibration meeting the requirements of Electricity Regulatory
Board.
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
C and I Calibrations Pvt. Ltd., Jaipur
Electricity
Regulatory
Board
NABL Accredited Laboratory (NABL C-0768; lab and site ) : Energy and Power
Facility for calibration of ABT meter, Energy Meter, LT/HT
Accuchek, Energy meter calibrator, Power meter /Analyzer,
CT/PT Burden Box, Meter Test Bench/ Source, Reference
Standard.
CT / PT Calibration
Facility for calibration of Standard CT / PT , AC High Voltage
and CT / PT Test set .
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
C and I Calibrations Pvt. Ltd., Jaipur
Electricity
Regulatory
Board
Energy , Power & CT ,PT Calibration
Parameter
Capability
Power / Energy 1Ø/ 3 Ø ;
40V to 320V, 40 Hz to 70 Hz, 1mA to 120 A
0.01% of rdg
Power Factor
0.00011 PF
Frequency 40Hz to 70 Hz
0.025%
CT up to 2000A Ratio Error
Phase Error
PT up to 33 kV Ratio Error
Phase Error
0.03%
2.5 minute
0.08%
4.0 minutes
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
C and I Calibrations Pvt. Ltd., Jaipur
Primary
Standard for
DWT
NABL Accredited Laboratory (NABL C-0769; lab and site ) : Pressure
Primary Standard for Dead Weight Tester Calibration upto
1200 kg/cm2 using Cross Float Method.
Equipped with DH-Budenberg UK Dead Weight Tester of Class
0.007% rdg Traceable to UKAS, UK.
Facility for calibration of DWT, Pressure Calibrator, Master
Pressure Gauge, Pressure Transmitter, Transducer, Digital
Pressure Indicator etc.
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
(B) C and I Calibrations Pvt. Ltd., Jaipur
Testing
Activity
Testing
Distribution Transformer
CT/PT
Energy Meter
AAC/AAAC/ACSR Conductor
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
(B) NABL Accredited Calibration Laboratory
12+ Years
of
Accreditation
C&I Systems Kota•
15 years old Calibration Laboratory
•
NABL accredited since 2000.
•
Currently NABL accredited for Mechanical, Thermal and
Electro-technical calibration.
•
NABL accredited for site calibration as well.
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
NABL Accredited Calibration Laboratory
12+ Years
of
Accreditation
C&I Systems Kota
Electro-technical (NABL C-0190)

Mechanical (NABL C-0088)


Pressure & Vacuum

Dimension , Angle

Mass & Balance

Volume & Density

Speed

Sound

Force
Temperature & Humidity (NABL C-0191)
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
NABL Accredited Calibration Laboratory
12+ Years
of
Accreditation
C&I Systems KotaOur Specialities
Calibration of :
•
High Voltage AC up to 100 kV & DC up to 35 kV
•
Hygrometers (Humidity )
•
Volume
•
Hydrometer (Density)
•
Medical Instruments like BP Instrument , Centrifuge, Incubator,
Glass wares, Burette , Pipette etc.
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
NABL Accredited Calibration Laboratory (Mechanical)
Our Coverage
And
Capabilities
C&I Systems KotaDiscipline
Parameter
Capability
Pressure
Pressure Calibrator, Gauges,
Transducer, Tx, 0-400 Kg/Cm2
0.04% FS
Vacuum
Vacuum Calibrator, Gauges, Transducer
0.045% FS
Spirit Level
Up To 300mm
16 µm/m
Dimension
Vernier, I/S, O/S Micrometer, Dial Gauge, Height
Gauge, Borge Gauge, Feeler Gauge, Bore Gauge,
Feeler Gauge, Measuring Tape/ Scale
0-1000 mm
Weights 1mg To 20kg
Balance Up To 100kg
0.008 mg to 0.73g
0.12 mg to 2.689g
Mass &
Balance
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
NABL Accredited Calibration Laboratory (Mechanical)
Our Coverage
And
Capabilities
C&I Systems KotaDiscipline
Parameter
Capability
Volume
10 µl To 5 ltr.
0.02 µl – 0.065 ml
Speed (RPM) Tachometer (upto 50000 RPM)
0.02% FS
Sound
Sound Level Meter 94db, 114db
0.53 dB
Density
Hydrometer 0.6 to 2 g/ml
0.0013 g/ml
Bevel Protector/Combination Set / Clinometer 003. 6 min.
3600
Tension 0.1kN - 50kN,
0.5%
Compression 40kN - 2000kN
0.7%
Angle
Force
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
NABL Accredited Calibration Laboratory (Electro-technical)
Our Coverage
And
Capabilities
C&I Systems KotaDiscipline
(
Parameter
Capability
Electrotechnical
Power / Energy 63 V To 415 V,10 mA to 500 A
0.065 % to 0.5 %
Power Factor
0.0055 PF
Frequency Up To 10 Mhz
Current(AC/DC) 10 µA to 1000A
Voltage(AC/DC) Up to 1000 V
Resistance 0.001Ω T0 400 MΩ
Insulation Resistance Up To 2GΩ
Inductance 10 µH To 10H
0.004%
0.03%-0.9%
0.005% - 0.5%
0.013%-0.93%
2.4%
0.35% - 0.55%
Capacitance 10nF To 10mF
0.13% - 1.45%
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
NABL Accredited Calibration Laboratory (Electro-technical)
Our Coverage
And
Capabilities
C&I Systems KotaDiscipline
Parameter
Capability
Electrotechnical
High Voltage AC 100kV
High Voltage DC 35kV
Oscilloscope Time Mark 2ns To 5 S
Band Width 600 MHz
5mv To 120V
Time (Stop Watch)
0.7% to 2.8%
2.9%
0.014%-0.13%
3.46%
0.3%
0.37 Sec-0.7 Sec.
Turn Ratio Up To 2000 Turn
0.12%-1.5%
Temp. Simulator/Indicator
0.02o C-0.26%o C
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
NABL Accredited Calibration Laboratory (Thermal)
Our Coverage
And
Capabilities
C&I Systems KotaDiscipline
Parameter
Capability
Temperature
RTD. T/C, Thermometer, Bath , Oven, Furnace
- 350C to 12000C
0.10C - 2.40C
Humidity
20% to 90% RH
2.06%
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
(D) Training and Consultancy
Training
By
Experts
Technical Training on Calibration Module
Type of Training
Power and
Energy
CT / PT
Principles & Techniques in Power & Energy Calibration and
Uncertainty of Measurement
Principles & Techniques in CT/PT Calibration and Uncertainty of
Measurement
Voltage, Current, Resistance, Watt Meter, Oscilloscope, Digital
Multimeter and Uncertainty of Measurement
Dimension, Mass & Volume, Pressure & Vacuum, Force, Speed,
Sound etc. and Uncertainty of Measurement
Temperature & Humidity Calibration and Uncertainty of
Measurement
Electrical
Calibration
Mechanical
Calibration
Thermal
Calibration
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
Training and Consultancy
Consultancy
for
Value addition
Consultancy Standard
Certification / Accreditation
ISO/IEC 17025
Testing and Calibration Laboratories
ISO 15189
Medical Laboratories
NABH, QCI
Hospitals and Health Care units
ISO 9000, ISO14000,
TS16949
ISO 22000
Industries / Public Sectors / Govt. Institutions
Food Industries / Food Outlets
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
(E) Research and Development
Our Patent
And
Other Research
Sectors Covered Area
Type of R&D
Our Patent
Waste Tyre
Patent File No 1271/DEL/2012 for “ A PROCESS for treating
dye house waste water for reclamation & reuse”
Waste Tyre Pyrolysis for recovery of value added products
Solar Energy
Solar Applications for Energy Conservation
Water Purification
Water purification using Magnetic De-scaling
Effluent Water
Treatment
Recovery & reuse of Effluent Water for zero Water
Discharge
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical
C&I
Contact us at [email protected]
[email protected]
Visit us at www.cicpl.in
C&I Systems, Kota
C and I Calibrations Pvt. Ltd., Jaipur
NABL Accredited Calibration
Laboratory for Mechanical,
Electro-technical and Thermal
NABL Accredited Primary Standard
Calibration Laboratory for
Mechanical & Electro-technical